Experimental application for monitoring earthquakes world-wide in near real time. Capable of issuing its own earthquake early warnings (EEW).
Seismic station orientation tools
Highly sensitive homemade Lehman seismometer project with custom Java application for displaying the data. Includes realtime chart with spectrogram, browser for recorded data and detected earthquakes database.
Source code for NodeMCU seismometers for SeismoCloud project
Real time seismometer using MPU6050/MPU9250
Open source firmware for the GeoShake T1 a home seismic station that runs P-wave detection on-device and streams ground motion to an open network.
スマホで簡単地震観測！スマホ1台あれば、インストール不要で、地震の波形を見たり、震度の目安を確認したりできます。加速度・速度・変位といった、マニアにうれしい詳しい情報も表示します。地震観測配信などにもおすすめ。
Datalogger server extension for ZejfSeis.
Synthesize low-cost dense accelerometer seismic network signals from IRIS network seismometer signals
Arduino seismometer with 10 bits resolution and 14 bits of dynamic range
Theoretical spectral response of a water well to harmonic strains
Acquisition and processing server for the NexaSeis collaborative seismic network
Seismometer documentation, code, and Flutter app
Arduino Wemos D1 basic seismometer. Creates SD card file, opens, writes, prints out. Tested with 64GB SD. Takes reading when values above / below set limits. XFW-HX711 Load Cell A2D. RTC DS1307. WeMos Micro SD Shield. IDE Info = WeMos D1R1 (ESP8266 Boards 2.5.2), upload 921600, 80MHz, WeMos D1R1 Boards 2
ESP32 Seismometer with ADS1115, ILI9341 display and sound feedback
Code for recording and processing data from a mems seismometer
A lightweight C daemon that connects to a remote SeedLink server as a client, decodes incoming MiniSEED records, and re-broadcasts the raw seismic samples in the ZejfSeis protocol format. This allows the ZejfSeis visualization software to display real-time seismic waveforms from any SeedLink-compatible source.
Some of my previous projects that i have built over the years.
To associate your repository with the seismometer topic, visit your repo's landing page and select "manage topics."