Driver for petrockblock.com PowerBlock
This is the driver for the ControlBlock re.v 2.X, a power switch and input/output/gameapd gadget for the Raspberry Pi
LilyPad Coin Cell Battery Holder with on/off switch, made by and available from SparkFun Electronics.
An Arduino-based latching power switch with auto-off functionality. Press the button to toggle ON/OFF, and the system automatically shuts off after 10 seconds.
ESPHOME configuration for Nous D3T switch
Power Switch Thermal Cauer Model
A fully analog circuit to simulate a power button press.
Control two DC motors with DRV8835HB H-bridge ICs up to 2x1.5A @ 11 V
Switch for voltage from 3.4 V to 40 V. Resistance in spliced state 160 mOhm. Integrated circuit TPS4H160.
Home Assistant integration to control Dataprobe iBoot / iBoot-G2 / iBoot Bar power switches over the local DxP protocol
Controlled relay station.
Control a WiFi power socket switch from an ESP32 used as access point
Power Switch for Raspberry Pi
Dual MOSFET or single Relay switching module.
ESP32 Auto Power Switch System with SOC monitoring from Home Assistant
Quad power MOSFET D-PAK transistors.
Open-source soft power switch module for learning and embedded electronics projects.
Add a description, image, and links to the power-switch topic page so that developers can more easily learn about it.
To associate your repository with the power-switch topic, visit your repo's landing page and select "manage topics."