A waveshaping saturator plug-ins suite: a compressor, a 4-band compressor, a clipper-limiter and a phase diffusor. Made with bricking intentions.
| Plug-in | Version | Features |
|---|---|---|
| SatComp | 0.5.3 | A waveshaping saturator, compressor and a 2-stage 3-band EQ |
| SatXComp | 0.1.1 | A 4-band multiband compressor with a saturator per band and a 5-band EQ |
| SatLim | 0.1.1 | A clipper and a true-peak brickwall limiter with a saturator |
| SatDiff | 0.1.0 | A dual waveshaping saturator with phase coloration effects |
VST3 and CLAP for macOS (Apple silicon and Intel), Windows and Linux (experimental: see Install). Free, GPL-3.0-or-later.
A waveshaping saturator with a compressor and a 2-stage 3-band EQ. Give the compressor more spice to squash.
- Saturator: 15 shapers including a Custom one you draw yourself (pencil icon), drive, bias, ASYM (how much of the even-order part each shaper keeps, so lopsided curves do not drag DC into the signal), HP/LP split, tone, sat mix, SAT GAIN with auto-match, 1x/2x/4x oversampling.
- Sidechain: external key from a second stereo input, with gain, HP and LP on the key and a SOLO to listen to it.
- Compressor: threshold, ratio, attack, release, knee and knee shape, peak/RMS detector, low cut, lookahead, feed-forward/feedback blend, GR distortion, makeup and mix.
- EQ: two stages (pre and post compressor), three bands each plus tilt, with a live spectrum.
- Output limiter: a true-peak brickwall at -0.2 dBTP, on by default (LIM), with about 2 ms of latency that is always reported to the host.
- Metering and tools: output meter, gain-reduction meter, post-saturator level meter, GAIN MATCH, DELTA monitor, plain BYPASS.
- Waveform scope: click the icon in the corner of the compressor plot for a half or full wave view of the output with the gain reduction stacked on top (transient meter).
- Compressor plot: the CEIL and FLOOR labels rescale it (up to +18 dB, so a clipped signal shows past a dashed 0 dB line), and the curve itself is draggable: the line above the threshold sets the ratio, the line below it the threshold.
- Presets: save and load your own, step through them, six Drums factory presets included. A name wrapped in asterisks (
*NAME*) means the preset has been modified.
A 4-band compressor with a waveshaping saturator on every band and a 5-band EQ. For surgical baking: split the signal, then drive each band to taste.
- Four bands (LO, ML, MH, HI) split by three Linkwitz-Riley crossovers, each with a 12, 24, 48 or 96 dB slope. Drag the crossover lines in the spectrum or use the XOV sliders. The bands sum flat.
- Per band: a saturator (same 15 shapers, custom curves with ODD and EVEN mirror tools, band-limited so it only adds harmonics inside the band), a compressor, SOLO and DELTA, and its own SAT GAIN auto-match.
- Compressor modes per band: DWNWARD (the plain compressor), UPWARD (lifts what is below the threshold, up to RANGE) or UP/DWN (both).
- Sidechain: the external key is split across the bands, so it ducks like a dynamic EQ; KEY MIX blends it with the band's own level.
- Spectrum viewport: the output over the dry signal. The accent colour shows where the compressor took gain away, its inverse where gain was added. Each band handle sits at the threshold with a bar for the gain reduction below it, the gain increase above it, and the in/out difference on top.
- EQ: a 5-band post EQ with notch, bandpass and allpass types, tilt, and a mix control for blending with the dry signal.
- Output limiter (true-peak, on by default), waveform scope, delta, plain bypass and four factory presets.
A 2-stage clipper/limiter with a waveshaping saturator. When you need to nuke it from orbit.
- Chain: saturator (x1 to x8 oversampling) into a hard CLIP at the ceiling, then a true-peak brickwall limiter, then OUT GAIN. The output gain is after the limiter on purpose.
- THRESHOLD is the input level that lands on the ceiling: lowering it chews the signal deeper. CLIP exposes and bricks more transients, RELEASE trades density against distortion.
- L.AHEAD on gives a lookahead true-peak limiter; off gives a zero-latency one that follows sample peaks. The TRU.PK readout is an 8x true peak either way.
- Transient scope shows the output with what the limiter removed (solid) and what the clipper removed (hatched) stacked on top; the GR meter splits the same way.
- Auto-matched SAT GAIN, DELTA (what the clipper and limiter removed), plain BYPASS and six factory presets.
A dual waveshaping saturator with phase colouring effects. Dedicated to sweet saturated sounds.
- Two saturators, A and B: each scene has its own shaper, drawable curve (up to 30 points with bendable segments), tile, drive, bias, HPF / LPF, tone and ASYM. MORPH blends them: a static crossfade, or a compressor-style detector that moves the blend with the input level (shape A on silence, shape B on loud peaks).
- TILE folds or repeats the curve so BIAS walks through copies of it.
- PHASE rotator and a colour slot, before or after the saturators: diffusor, phaser, flanger, ring mod or frequency shifter, with COLOR MIX.
- Output: a 24 dB per octave HPF with mid / side switches (side only is a mono sub), IN and OUT gain, a true-peak limiter, level-match on the SAT readout, plain BYPASS and eight factory presets.
- 30 colour schemes, each with a light mode, plus your own: click the logo for the next scheme, double-click it for light/dark, right-click for the list. The Preferences tab (About page) has the mode switch, a scheme list with swatches, 11 fonts, a custom theme editor with a colour picker, and SET AS DEFAULT for new instances. User themes are saved in
~/Library/Application Support/SatComp/themes.json(%APPDATA%\SatComp\themes.jsonon Windows). - Resizable window (100% to 250%). Double-click any slider to reset it. Click the title for an About page with the signal flow, Preferences and the changelog.
Download from the Releases page: SatComp-Suite-<version>-<platform>.zip holds all four plug-ins and a joint manual (macOS also has a .pkg installer that puts them in place for all users; the joint manual is also attached on its own). Inside are VST3/ and CLAP/ folders that mirror the install locations, an INSTALL.txt and the manual (PDF; the per-plug-in manuals are also in docs/manual/). Copy the bundle (satcomp, satxcomp, satlim or satdiff) to:
| macOS | Windows | |
|---|---|---|
| VST3 | ~/Library/Audio/Plug-Ins/VST3/ |
C:\Program Files\Common Files\VST3\ |
| CLAP | ~/Library/Audio/Plug-Ins/CLAP/ |
C:\Program Files\Common Files\CLAP\ |
Linux (experimental): unzip and run bash install.sh, which copies both formats into the hidden ~/.vst3 and ~/.clap folders (--system for all users). It needs an X11 session. Known issue: the meters and the scope can stutter on some systems. Bug reports are welcome.
Then rescan plug-ins in your DAW.
macOS: the builds are not notarized. If Gatekeeper blocks one, run xattr -dr com.apple.quarantine ~/Library/Audio/Plug-Ins/VST3/satcomp.vst3 (and the same for the other bundles and the CLAP ones).
User presets are saved to ~/Library/Application Support/<SatComp|SatXComp|SatLim>/Presets (macOS) or %APPDATA%\<name>\Presets (Windows).
Requires Rust.
cd rust
cargo test
cargo xtask bundle satcomp --release # or satxcomp, satlim; this machine's architecture
cargo xtask bundle-universal satcomp --release # macOS: arm64 + x86_64Bundles land in rust/target/bundled/. GitHub Actions builds the macOS universal and Windows bundles on every push (see .github/workflows/build.yml). A v* tag releases all the plug-ins together; satxcomp-v* and satlim-v* tags release one plug-in on its own.
rust/: the production plug-ins. Shared crates:satcomp-dsp(saturator, compressor, EQ and limiter blocks) andsatcomp-ui(egui toolkit, colour schemes, fonts). One DSP crate plus one nih-plug shell per plug-in (satcomp-*,satxcomp-*,satlim-*); factory presets are in each*-plugin/presets/.SatComp.jsfx: the original REAPER JSFX prototype. Archival, frozen at v0.3.docs/:FOUNDATION.md(workflow and gotchas),INVENTORY.md(versions and milestones),PARAMETERS.md(parameter reference),SATLIM.md,HANDOFF.md(JSFX-era design decisions),TEST_CHECKLIST.md, and the release notes indocs/releases/.
GPL-3.0-or-later, see LICENSE. Built with nih-plug and egui. Typefaces (all SIL OFL 1.1, embedded): Fira Code, JetBrains Mono, Geist Mono, Roboto Mono, Oxygen Mono, Doto, DM Mono, Victor Mono, Anonymous Pro, Inconsolata and Courier Prime; licences are in Fonts/.



