Skip to content

arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes #904

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Open
drajpura269 wants to merge 6 commits into
base: staging/nord
Choose a base branch
from
Open

arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes #904

Show file tree
Hide file tree
Changes from all commits
Commits
Show all changes
6 commits
Select commit Hold shift + click to select a range
881e578
arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes
drajpura269 Aug 5, 2026
26a9fa3
arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes
drajpura269 Aug 5, 2026
0621f4f
Update compatible for gpios
drajpura269 Aug 6, 2026
f7876c2
arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes
drajpura269 Aug 6, 2026
e5eef81
arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes
drajpura269 Aug 6, 2026
29eb1a7
arm64: dts: qcom: iq10: Update SPMI bus and PMIC subnodes
drajpura269 Aug 6, 2026
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Loading
Jump to
Jump to file
Failed to load files.
Loading
Diff view
Diff view
285 changes: 285 additions & 0 deletions arch/arm64/boot/dts/qcom/kai_mv-nord.dtsi
View file
Open in desktop
Original file line number Diff line number Diff line change
@@ -0,0 +1,285 @@
// SPDX-License-Identifier: BSD-3-Clause
/*
* Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
*/

#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>

&spmi_bus {
kai_mv_e: pmic@4 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x4 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_e_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x4 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_e_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_e_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_f: pmic@5 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x5 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_f_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x5 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_f_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_f_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_g: pmic@6 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x6 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_g_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x6 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_g_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_g_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_h: pmic@7 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x7 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_h_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x7 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_h_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_h_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_i: pmic@8 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x8 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_i_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x8 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_i_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_i_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_j: pmic@9 {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0x9 SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_j_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0x9 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_j_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_j_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_k: pmic@a {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0xa SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_k_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0xa 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_k_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_k_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};

kai_mv_l: pmic@b {
compatible = "qcom,pmm8654au", "qcom,spmi-pmic";
reg = <0xb SPMI_USID>;
#address-cells = <1>;
#size-cells = <0>;

kai_mv_l_temp_alarm: temp-alarm@a00 {
compatible = "qcom,spmi-temp-alarm";
reg = <0xa00>;
interrupts = <0xb 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
#thermal-sensor-cells = <0>;
};

kai_mv_l_gpios: gpio@8800 {
compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio";
reg = <0x8800>;
gpio-controller;
gpio-ranges = <&kai_mv_l_gpios 0 0 12>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
};
};

/ {
thermal-zones {
kai_mv_e_thermal: kai-e-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_e_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_f_thermal: kai-f-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_f_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_g_thermal: kai-g-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_g_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_h_thermal: kai-h-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_h_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_i_thermal: kai-i-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_i_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_j_thermal: kai-j-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_j_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_k_thermal: kai-k-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_k_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};

kai_mv_l_thermal: kai-l-thermal {
polling-delay-passive = <100>;
thermal-sensors = <&kai_mv_l_temp_alarm>;
trips {
trip0 { temperature = <95000>; hysteresis = <0>; type = "passive"; };
trip1 { temperature = <115000>; hysteresis = <0>; type = "hot"; };
trip2 { temperature = <145000>; hysteresis = <0>; type = "critical"; };
};
};
};
};
11 changes: 6 additions & 5 deletions arch/arm64/boot/dts/qcom/nord-ride-sx.dts
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,7 +9,8 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "nord-embedded.dtsi"
#include "nord-pmics.dtsi"
#include "pmm8650au-nord.dtsi"
#include "kai_mv-nord.dtsi"

/ {
model = "Qualcomm Technologies, Inc. Nord Ride SX";
Expand Down Expand Up @@ -74,7 +75,7 @@
regulator-name = "usb2_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&pmic_h_gpios 3 GPIO_ACTIVE_HIGH>;
gpio = <&kai_mv_h_gpios 3 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
Expand Down Expand Up @@ -533,7 +534,7 @@

vdd1v8-supply = <&vreg_l3l_1p8>;

reset-gpios = <&pmic_i_gpios 9 GPIO_ACTIVE_LOW>;
reset-gpios = <&kai_mv_i_gpios 9 GPIO_ACTIVE_LOW>;
};

usb1_repeater: redriver@4f {
Expand All @@ -543,7 +544,7 @@

vdd1v8-supply = <&vreg_l3l_1p8>;

reset-gpios = <&pmic_i_gpios 10 GPIO_ACTIVE_LOW>;
reset-gpios = <&kai_mv_i_gpios 10 GPIO_ACTIVE_LOW>;
};

usb2_repeater: redriver@47 {
Expand All @@ -553,7 +554,7 @@

vdd1v8-supply = <&vreg_l3l_1p8>;

reset-gpios = <&pmic_l_gpios 3 GPIO_ACTIVE_LOW>;
reset-gpios = <&kai_mv_l_gpios 3 GPIO_ACTIVE_LOW>;
};
};

Expand Down
2 changes: 2 additions & 0 deletions arch/arm64/boot/dts/qcom/nord-rrd.dts
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -9,6 +9,8 @@
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>

#include "nord-embedded.dtsi"
#include "pmm8650au-nord.dtsi"
#include "kai_mv-nord.dtsi"

/ {
model = "Qualcomm Technologies, Inc. IQ10 RRD";
Expand Down
4 changes: 3 additions & 1 deletion arch/arm64/boot/dts/qcom/nord.dtsi
View file
Open in desktop
Original file line number Diff line number Diff line change
Expand Up @@ -1721,15 +1721,17 @@
reg = <0x0 0x0c400000 0x0 0x3000>,
<0x0 0x0c500000 0x0 0x400000>,
<0x0 0x0c440000 0x0 0x80000>,
<0x0 0x0c4c0000 0x0 0x20000>,
<0x0 0x0c4c0000 0x0 0x10000>,
<0x0 0x0c42d000 0x0 0x4000>;
reg-names = "core",
"chnls",
"obsrvr",
"intr",
"cnfg";
cell-index = <0>;
qcom,channel = <0>;
qcom,ee = <0>;
qcom,bus-id = <0>;
interrupts-extended = <&pdc 1 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "periph_irq";
interrupt-controller;
Expand Down
Loading