Skip to content

chore: align pre-commit ruff hook with the pinned ruff 0.17.0 - #335

Merged
docdyhr merged 1 commit into
mainfrom
chore/pre-commit-ruff-0.17.0
Oct 17, 2026
Merged

chore: align pre-commit ruff hook with the pinned ruff 0.17.0#335
docdyhr merged 1 commit into
mainfrom
chore/pre-commit-ruff-0.17.0

Conversation

@docdyhr

@docdyhr docdyhr commented Oct 17, 2026 •
edited by sourcery-ai Bot
Loading

Copy link
Copy Markdown
Owner

Summary

Aligns the pre-commit ruff hook with the pinned ruff. .pre-commit-config.yaml ran ruff-pre-commit v0.16.2, while pyproject.toml, requirements-dev.txt and requirements-py313.txt pin ruff==0.17.0 (since #331). Dependabot bumps the pin but not pre-commit revs, so local hooks and CI could lint with different rule sets.

Changes

  • .pre-commit-config.yaml: ruff-pre-commit rev: v0.16.2 → v0.17.0
  • CHANGELOG.md: an Unreleased → Fixed entry

Verification

  • pre-commit run --all-files ruff and pre-commit run --all-files ruff-format both pass on v0.17.0 and change no files.
  • ruff check --statistics gives identical output on ruff 0.16.10 and 0.17.0 (0 violations); ruff format --check reports 206 files already formatted on both.
  • No workflow runs pre-commit (CI calls ruff from the pinned dev dependencies), so this only affects local hooks.

🤖 Generated with Claude Code

Summary by Sourcery

Align the pre-commit Ruff hooks with the pinned Ruff version.

Enhancements:

  • Align the pre-commit Ruff hooks with the project’s pinned Ruff 0.17.0 version to keep local linting consistent with the development environment.

Documentation:

  • Document the Ruff pre-commit version alignment in the changelog.

@docdyhr @claude
chore: align pre-commit ruff hook with the pinned ruff 0.17.0
3c1b6f0 
.pre-commit-config.yaml ran ruff-pre-commit v0.16.2 while pyproject and
requirements-dev/-py313 pin ruff==0.17.0 (#331). Dependabot bumps the pin
but not pre-commit revs, so local hooks and CI could lint with different
rule sets. `pre-commit run --all-files ruff` and `ruff-format` pass on
v0.17.0 with no changes; ruff 0.16.10 and 0.17.0 give identical
`check --statistics` (0 violations) and 206 files already formatted.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
@sourcery-ai

sourcery-ai Bot commented Oct 17, 2026 •
edited
Loading

Copy link
Copy Markdown
Contributor
Reviewer's guide (collapsed on small PRs)

Reviewer's Guide

Updates the ruff-pre-commit revision to v0.17.0 so local hooks match the pinned Ruff version used by the project, and documents the fix in the Unreleased changelog. Verification confirms both Ruff hooks pass without changing files; CI is unaffected because it invokes Ruff from pinned development dependencies.

File-Level Changes

Change Details Files
Align the pre-commit Ruff hook version with the repository’s pinned Ruff dependency.
  • Update the ruff-pre-commit revision from v0.16.2 to v0.17.0.
  • Keep local pre-commit linting and formatting on the same Ruff release as the pinned development dependencies.
 .pre-commit-config.yaml
Document the hook version alignment in the unreleased changelog.
  • Add a Fixed entry explaining the prior version drift and the resulting alignment.
  • Record that Ruff hooks pass across all files without modifications.
 CHANGELOG.md
Tips and commands

Interacting with Sourcery

  • Trigger a new review: Comment @sourcery-ai review on the pull request.
  • Continue discussions: Reply directly to Sourcery's review comments.
  • Generate a GitHub issue from a review comment: Ask Sourcery to create an
    issue from a review comment by replying to it. You can also reply to a
    review comment with @sourcery-ai issue to create an issue from it.
  • Generate a pull request title: Write @sourcery-ai anywhere in the pull
    request title to generate a title at any time. You can also comment
    @sourcery-ai title on the pull request to (re-)generate the title at any time.
  • Generate a pull request summary: Write @sourcery-ai summary anywhere in
    the pull request body to generate a PR summary at any time exactly where you
    want it. You can also comment @sourcery-ai summary on the pull request to
    (re-)generate the summary at any time.
  • Generate reviewer's guide: Comment @sourcery-ai guide on the pull
    request to (re-)generate the reviewer's guide at any time.
  • Resolve all Sourcery comments: Comment @sourcery-ai resolve on the
    pull request to resolve all Sourcery comments. Useful if you've already
    addressed all the comments and don't want to see them anymore.
  • Dismiss all Sourcery reviews: Comment @sourcery-ai dismiss on the pull
    request to dismiss all existing Sourcery reviews. Especially useful if you
    want to start fresh with a new review - don't forget to comment
    @sourcery-ai review to trigger a new review!

Customizing Your Experience

Access your dashboard to:

  • Enable or disable review features such as the Sourcery-generated pull request
    summary, the reviewer's guide, and others.
  • Change the review language.
  • Add, remove or edit custom review instructions.
  • Adjust other review settings.

Getting Help

@chatgpt-codex-connector

chatgpt-codex-connector Bot commented Oct 17, 2026 •
edited
Loading

Copy link
Copy Markdown

Codex Review Summary

This comment shows the latest Codex review activity on this pull request.

Review Status Commit Review trigger
📝 Code Review ✅ Completed 2026-10-17T01:05:27.180789Z 3c1b6f0 PR opened
ℹ️ About Codex in GitHub

Your team has set up Codex to review pull requests in this repo. Reviews are triggered when you

  • Open a pull request for review
  • Mark a draft as ready
  • Comment "@codex review" or "@codex security review".

Codex reacts with 👀 while any review is running, comments if it has suggestions, and reacts with 👍 once all reviews finish with no findings.

@github-actions

github-actions Bot commented Oct 17, 2026

Copy link
Copy Markdown

🔒 Security Analysis Report

Security Analysis Report

Generated: Sat Oct 17 01:05:19 UTC 2026
Repository: docdyhr/versiontracker
Commit: 60d28f6

Bandit Security Scan

�[?25l
�[2KWorking... �[90m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m �[35m  0%�[0m �[36m-:--:--�[0m
�[2KWorking... �[90m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m �[35m  0%�[0m �[36m-:--:--�[0m
�[2KWorking... �[91m━━━━━━━━━━�[0m�[91m╸�[0m�[90m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m �[35m 27%�[0m �[36m0:00:01�[0m
�[2KWorking... �[91m━━━━━━━━━━━━━━━━�[0m�[90m╺�[0m�[90m━━━━━━━━━━━━━━━━━━━━━━━�[0m �[35m 41%�[0m �[36m0:00:01�[0m
�[2KWorking... �[91m━━━━━━━━━━━━━━━━━━━━━━�[0m�[91m╸�[0m�[90m━━━━━━━━━━━━━━━━━�[0m �[35m 56%�[0m �[36m0:00:01�[0m
�[2KWorking... �[91m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m�[90m╺�[0m�[90m━━━━━━━━━━�[0m �[35m 73%�[0m �[36m0:00:01�[0m
�[2KWorking... �[91m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m�[90m╺�[0m�[90m━━━━━━�[0m �[35m 83%�[0m �[36m0:00:01�[0m
�[2KWorking... �[90m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m �[35m100%�[0m �[33m0:00:00�[0m
�[2KWorking... �[90m━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━�[0m �[35m100%�[0m �[33m0:00:00�[0m
�[?25hRun started:2026-10-17 01:05:20.464647+00:00

Test results:
>> Issue: [B608:hardcoded_sql_expressions] Possible SQL injection vector through string-based query construction.
   Severity: Medium   Confidence: Low
   CWE: CWE-89 (https://cwe.mitre.org/data/definitions/89.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b608_hardcoded_sql_expressions.html
   Location: versiontracker/advanced_cache.py:693:24
692	                # Use f-string for better readability
693	                msg = f"Failed to delete from cache {key}: {e}"
694	                raise CacheError(msg) from e

--------------------------------------------------
>> Issue: [B105:hardcoded_password_string] Possible hardcoded password: 'homebrew_token'
   Severity: Low   Confidence: Medium
   CWE: CWE-259 (https://cwe.mitre.org/data/definitions/259.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b105_hardcoded_password_string.html
   Location: versiontracker/audit/models.py:161:21
160	    BUNDLE_ID = "bundle_id"
161	    HOMEBREW_TOKEN = "homebrew_token"
162	    DISPLAY_NAME = "display_name"

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/config.py:174:16
173	                cmd = f"{path} --version"
174	                import subprocess
175	

--------------------------------------------------
>> Issue: [B603:subprocess_without_shell_equals_true] subprocess call - check for execution of untrusted input.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b603_subprocess_without_shell_equals_true.html
   Location: versiontracker/config.py:177:29
176	                try:
177	                    result = subprocess.run(cmd.split(), capture_output=True, timeout=2, check=False)
178	                    returncode = result.returncode

--------------------------------------------------
>> Issue: [B110:try_except_pass] Try, Except, Pass detected.
   Severity: Low   Confidence: High
   CWE: CWE-703 (https://cwe.mitre.org/data/definitions/703.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b110_try_except_pass.html
   Location: versiontracker/experimental/analytics.py:645:16
644	                    self.peak_cpu = max(self.peak_cpu, cpu_percent)
645	                except Exception:
646	                    pass
647	                time.sleep(0.05)

--------------------------------------------------
>> Issue: [B101:assert_used] Use of assert detected. The enclosed code will be removed when compiling to optimised byte code.
   Severity: Low   Confidence: High
   CWE: CWE-703 (https://cwe.mitre.org/data/definitions/703.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b101_assert_used.html
   Location: versiontracker/handlers/outdated_handlers.py:518:8
517	        # Type assertion: apps and brews cannot be None here due to exit_code checks above
518	        assert apps is not None
519	        assert brews is not None

--------------------------------------------------
>> Issue: [B101:assert_used] Use of assert detected. The enclosed code will be removed when compiling to optimised byte code.
   Severity: Low   Confidence: High
   CWE: CWE-703 (https://cwe.mitre.org/data/definitions/703.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b101_assert_used.html
   Location: versiontracker/handlers/outdated_handlers.py:519:8
518	        assert apps is not None
519	        assert brews is not None
520	        apps = _filter_applications(apps, brews, include_brews)

--------------------------------------------------
>> Issue: [B101:assert_used] Use of assert detected. The enclosed code will be removed when compiling to optimised byte code.
   Severity: Low   Confidence: High
   CWE: CWE-703 (https://cwe.mitre.org/data/definitions/703.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b101_assert_used.html
   Location: versiontracker/handlers/outdated_handlers.py:539:8
538	        # Type assertion: outdated_info cannot be None here due to exit_code check
539	        assert outdated_info is not None
540	        # Type cast: outdated_info cannot be None here due to exit_code check above

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/homebrew.py:12:0
11	import re
12	import subprocess
13	import time

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/macos_integration.py:12:0
11	import plistlib
12	import subprocess
13	from pathlib import Path

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/menubar_app.py:8:0
7	import logging
8	import subprocess
9	import sys

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/plugins/example_plugins.py:322:16
321	            try:
322	                import subprocess
323	

--------------------------------------------------
>> Issue: [B607:start_process_with_partial_path] Starting a process with a partial executable path
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b607_start_process_with_partial_path.html
   Location: versiontracker/plugins/example_plugins.py:324:25
323	
324	                result = subprocess.run(["brew", "--version"], capture_output=True, text=True, timeout=5)
325	                if result.returncode == 0:

--------------------------------------------------
>> Issue: [B603:subprocess_without_shell_equals_true] subprocess call - check for execution of untrusted input.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b603_subprocess_without_shell_equals_true.html
   Location: versiontracker/plugins/example_plugins.py:324:25
323	
324	                result = subprocess.run(["brew", "--version"], capture_output=True, text=True, timeout=5)
325	                if result.returncode == 0:

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/utils.py:16:0
15	import shutil
16	import subprocess
17	import sys

--------------------------------------------------
>> Issue: [B607:start_process_with_partial_path] Starting a process with a partial executable path
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b607_start_process_with_partial_path.html
   Location: versiontracker/utils.py:804:17
803	    try:
804	        result = subprocess.run(["which", "brew"], capture_output=True, text=True, timeout=5)
805	        return result.returncode == 0

--------------------------------------------------
>> Issue: [B603:subprocess_without_shell_equals_true] subprocess call - check for execution of untrusted input.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b603_subprocess_without_shell_equals_true.html
   Location: versiontracker/utils.py:804:17
803	    try:
804	        result = subprocess.run(["which", "brew"], capture_output=True, text=True, timeout=5)
805	        return result.returncode == 0

--------------------------------------------------
>> Issue: [B607:start_process_with_partial_path] Starting a process with a partial executable path
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b607_start_process_with_partial_path.html
   Location: versiontracker/utils.py:820:17
819	    try:
820	        result = subprocess.run(["brew", "--prefix"], capture_output=True, text=True, timeout=5)
821	        if result.returncode == 0:

--------------------------------------------------
>> Issue: [B603:subprocess_without_shell_equals_true] subprocess call - check for execution of untrusted input.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b603_subprocess_without_shell_equals_true.html
   Location: versiontracker/utils.py:820:17
819	    try:
820	        result = subprocess.run(["brew", "--prefix"], capture_output=True, text=True, timeout=5)
821	        if result.returncode == 0:

--------------------------------------------------
>> Issue: [B603:subprocess_without_shell_equals_true] subprocess call - check for execution of untrusted input.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/plugins/b603_subprocess_without_shell_equals_true.html
   Location: versiontracker/utils.py:853:15
852	    try:
853	        return subprocess.run(command, capture_output=True, text=True, timeout=timeout, check=check)
854	    except subprocess.TimeoutExpired as e:

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/version/batch.py:11:0
10	import logging
11	import subprocess
12	from concurrent.futures import ThreadPoolExecutor

--------------------------------------------------
>> Issue: [B404:blacklist] Consider possible security implications associated with the subprocess module.
   Severity: Low   Confidence: High
   CWE: CWE-78 (https://cwe.mitre.org/data/definitions/78.html)
   More Info: https://bandit.readthedocs.io/en/1.9.4/blacklists/blacklist_imports.html#b404-import-subprocess
   Location: versiontracker/version/homebrew.py:18:0
17	import logging
18	import subprocess
19	

--------------------------------------------------

Code scanned:
	Total lines of code: 17221
	Total lines skipped (#nosec): 0
	Total potential issues skipped due to specifically being disabled (e.g., #nosec BXXX): 30

Run metrics:
	Total issues (by severity):
		Undefined: 0
		Low: 21
		Medium: 1
		High: 0
	Total issues (by confidence):
		Undefined: 0
		Low: 1
		Medium: 1
		High: 20
Files skipped (0):

Pip-Audit Results

�[?25l�[32m-�[0m Collecting inputs
�[2K�[32m-�[0m Collecting inputs
�[2K�[32m-�[0m Collecting inputs
�[2K�[32m-�[0m Collecting inputs
�[2K�[32m\�[0m Collecting aiohappyeyeballs (2.7.1)
�[2K�[32m\�[0m Auditing aiohappyeyeballs (2.7.1)
�[2K�[32m\�[0m Collecting aiohttp (3.14.5)
�[2K�[32m\�[0m Auditing aiohttp (3.14.5)
�[2K�[32m\�[0m Collecting aiosignal (1.4.0)
�[2K�[32m\�[0m Auditing aiosignal (1.4.0)
�[2K�[32m\�[0m Collecting ast_serialize (0.13.1)
�[2K�[32m\�[0m Collecting ast_serialize (0.13.1)
�[2K�[32m\�[0m Auditing ast_serialize (0.13.1)
�[2K�[32m\�[0m Collecting attrs (26.1.0)
�[2K�[32m\�[0m Auditing attrs (26.1.0)
�[2K�[32m\�[0m Collecting bandit (1.9.4)
�[2K�[32m\�[0m Auditing bandit (1.9.4)
�[2K�[32m\�[0m Collecting boolean.py (5.0)
�[2K�[32m\�[0m Auditing boolean.py (5.0)
�[2K�[32m\�[0m Collecting build (1.6.1)
�[2K�[32m\�[0m Auditing build (1.6.1)
�[2K�[32m\�[0m Collecting CacheControl (0.14.4)
�[2K�[32m\�[0m Auditing CacheControl (0.14.4)
�[2K�[32m\�[0m Collecting certifi (2026.7.22)
�[2K�[32m\�[0m Auditing certifi (2026.7.22)
�[2K�[32m\�[0m Collecting cffi (2.1.1)
�[2K�[32m\�[0m Auditing cffi (2.1.1)
�[2K�[32m\�[0m Collecting charset-normalizer (3.5.2)
�[2K�[32m\�[0m Auditing charset-normalizer (3.5.2)
�[2K�[32m\�[0m Collecting coverage (7.16.2)
�[2K�[32m\�[0m Auditing coverage (7.16.2)
�[2K�[32m\�[0m Collecting cryptography (50.0.2)
�[2K�[32m\�[0m Auditing cryptography (50.0.2)
�[2K�[32m\�[0m Collecting cyclonedx-python-lib (11.12.0)
�[2K�[32m\�[0m Auditing cyclonedx-python-lib (11.12.0)
�[2K�[32m\�[0m Collecting defusedxml (0.7.1)
�[2K�[32m\�[0m Auditing defusedxml (0.7.1)
�[2K�[32m\�[0m Collecting docutils (0.23)
�[2K�[32m\�[0m Auditing docutils (0.23)
�[2K�[32m\�[0m Collecting filelock (4.2.0)
�[2K�[32m\�[0m Auditing filelock (4.2.0)
�[2K�[32m\�[0m Collecting frozenlist (1.8.0)
�[2K�[32m\�[0m Auditing frozenlist (1.8.0)
�[2K�[32m\�[0m Collecting id (1.6.1)
�[2K�[32m\�[0m Auditing id (1.6.1)
�[2K�[32m\�[0m Collecting idna (3.20)
�[2K�[32m\�[0m Auditing idna (3.20)
�[2K�[32m\�[0m Collecting iniconfig (2.3.1)
�[2K�[32m\�[0m Auditing iniconfig (2.3.1)
�[2K�[32m\�[0m Collecting jaraco.classes (3.4.0)
�[2K�[32m\�[0m Auditing jaraco.classes (3.4.0)
�[2K�[32m\�[0m Collecting jaraco.context (6.1.2)
�[2K�[32m\�[0m Auditing jaraco.context (6.1.2)
�[2K�[32m\�[0m Collecting jaraco.functools (4.6.0)
�[2K�[32m\�[0m Auditing jaraco.functools (4.6.0)
�[2K�[32m\�[0m Collecting jeepney (0.9.0)
�[2K�[32m\�[0m Auditing jeepney (0.9.0)
�[2K�[32m\�[0m Collecting keyring (25.7.0)
�[2K�[32m\�[0m Auditing keyring (25.7.0)
�[2K�[32m\�[0m Collecting librt (0.16.0)
�[2K�[32m\�[0m Auditing librt (0.16.0)
�[2K�[32m\�[0m Collecting license-expression (30.4.4)
�[2K�[32m\�[0m Auditing license-expression (30.4.4)
�[2K�[32m\�[0m Collecting macversiontracker (1.2.0)
�[2K�[32m\�[0m Auditing macversiontracker (1.2.0)
�[2K�[32m\�[0m Collecting markdown-it-py (4.2.0)
�[2K�[32m\�[0m Auditing markdown-it-py (4.2.0)
�[2K�[32m\�[0m Collecting mdurl (0.1.2)
�[2K�[32m\�[0m Auditing mdurl (0.1.2)
�[2K�[32m\�[0m Collecting more-itertools (11.2.1)
�[2K�[32m\�[0m Auditing more-itertools (11.2.1)
�[2K�[32m\�[0m Collecting msgpack (1.2.3)
�[2K�[32m\�[0m Auditing msgpack (1.2.3)
�[2K�[32m\�[0m Collecting multidict (7.1.0)
�[2K�[32m\�[0m Auditing multidict (7.1.0)
�[2K�[32m\�[0m Collecting mypy (2.4.0)
�[2K�[32m\�[0m Auditing mypy (2.4.0)
�[2K�[32m\�[0m Collecting mypy_extensions (1.1.0)
�[2K�[32m\�[0m Auditing mypy_extensions (1.1.0)
�[2K�[32m\�[0m Collecting nh3 (0.3.7)
�[2K�[32m\�[0m Auditing nh3 (0.3.7)
�[2K�[32m\�[0m Collecting packageurl-python (0.17.6)
�[2K�[32m\�[0m Auditing packageurl-python (0.17.6)
�[2K�[32m\�[0m Collecting packaging (26.3)
�[2K�[32m\�[0m Auditing packaging (26.3)
�[2K�[32m\�[0m Collecting pathspec (1.1.1)
�[2K�[32m\�[0m Auditing pathspec (1.1.1)
�[2K�[32m\�[0m Collecting pip (26.2.1)
�[2K�[32m\�[0m Auditing pip (26.2.1)
�[2K�[32m\�[0m Collecting pip_api (0.0.35)
�[2K�[32m\�[0m Auditing pip_api (0.0.35)
�[2K�[32m\�[0m Collecting pip_audit (2.10.1)
�[2K�[32m\�[0m Auditing pip_audit (2.10.1)
�[2K�[32m\�[0m Collecting pip-requirements-parser (32.0.1)
�[2K�[32m\�[0m Auditing pip-requirements-parser (32.0.1)
�[2K�[32m\�[0m Collecting platformdirs (4.13.3)
�[2K�[32m\�[0m Auditing platformdirs (4.13.3)
�[2K�[32m\�[0m Collecting pluggy (1.7.0)
�[2K�[32m\�[0m Auditing pluggy (1.7.0)
�[2K�[32m\�[0m Collecting propcache (0.5.4)
�[2K�[32m\�[0m Collecting propcache (0.5.4)
�[2K�[32m\�[0m Auditing propcache (0.5.4)
�[2K�[32m\�[0m Collecting psutil (7.2.2)
�[2K�[32m\�[0m Auditing psutil (7.2.2)
�[2K�[32m\�[0m Collecting py-serializable (2.1.0)
�[2K�[32m\�[0m Auditing py-serializable (2.1.0)
�[2K�[32m\�[0m Collecting pycparser (3.11)
�[2K�[32m\�[0m Auditing pycparser (3.11)
�[2K�[32m\�[0m Collecting Pygments (2.21.0)
�[2K�[32m\�[0m Auditing Pygments (2.21.0)
�[2K�[32m\�[0m Collecting pyparsing (3.3.3)
�[2K�[32m\�[0m Auditing pyparsing (3.3.3)
�[2K�[32m\�[0m Collecting pyproject_hooks (1.3.3)
�[2K�[32m\�[0m Auditing pyproject_hooks (1.3.3)
�[2K�[32m\�[0m Collecting pytest (9.1.1)
�[2K�[32m\�[0m Auditing pytest (9.1.1)
�[2K�[32m\�[0m Collecting pytest-asyncio (1.4.0)
�[2K�[32m\�[0m Auditing pytest-asyncio (1.4.0)
�[2K�[32m\�[0m Collecting pytest-cov (7.1.0)
�[2K�[32m\�[0m Auditing pytest-cov (7.1.0)
�[2K�[32m\�[0m Collecting pytest-mock (3.16.0)
�[2K�[32m\�[0m Auditing pytest-mock (3.16.0)
�[2K�[32m\�[0m Collecting pytest-timeout (2.4.0)
�[2K�[32m\�[0m Auditing pytest-timeout (2.4.0)
�[2K�[32m\�[0m Collecting PyYAML (6.0.3)
�[2K�[32m\�[0m Auditing PyYAML (6.0.3)
�[2K�[32m\�[0m Collecting readme_renderer (46.0)
�[2K�[32m\�[0m Auditing readme_renderer (46.0)
�[2K�[32m\�[0m Collecting requests (2.34.2)
�[2K�[32m\�[0m Auditing requests (2.34.2)
�[2K�[32m\�[0m Collecting requests-toolbelt (1.0.0)
�[2K�[32m\�[0m Auditing requests-toolbelt (1.0.0)
�[2K�[32m\�[0m Collecting rfc3986 (2.0.0)
�[2K�[32m\�[0m Auditing rfc3986 (2.0.0)
�[2K�[32m\�[0m Collecting rich (15.0.0)
�[2K�[32m\�[0m Auditing rich (15.0.0)
�[2K�[32m\�[0m Collecting ruff (0.17.0)
�[2K�[32m\�[0m Auditing ruff (0.17.0)
�[2K�[32m\�[0m Collecting SecretStorage (3.5.0)
�[2K�[32m\�[0m Auditing SecretStorage (3.5.0)
�[2K�[32m\�[0m Collecting setuptools (84.0.0)
�[2K�[32m\�[0m Auditing setuptools (84.0.0)
�[2K�[32m\�[0m Collecting sortedcontainers (2.4.0)
�[2K�[32m\�[0m Auditing sortedcontainers (2.4.0)
�[2K�[32m\�[0m Collecting stevedore (5.9.1)
�[2K�[32m\�[0m Auditing stevedore (5.9.1)
�[2K�[32m\�[0m Collecting tabulate (0.10.0)
�[2K�[32m\�[0m Auditing tabulate (0.10.0)
�[2K�[32m\�[0m Collecting termcolor (3.3.0)
�[2K�[32m\�[0m Auditing termcolor (3.3.0)
�[2K�[32m\�[0m Collecting tomli (2.5.0)
�[2K�[32m\�[0m Auditing tomli (2.5.0)
�[2K�[32m\�[0m Collecting tomli_w (1.2.0)
�[2K�[32m\�[0m Auditing tomli_w (1.2.0)
�[2K�[32m\�[0m Collecting tqdm (4.70.1)
�[2K�[32m\�[0m Auditing tqdm (4.70.1)
�[2K�[32m\�[0m Collecting twine (7.0.0)
�[2K�[32m\�[0m Auditing twine (7.0.0)
�[2K�[32m\�[0m Collecting types-PyYAML (6.0.12.20260906)
�[2K�[32m\�[0m Auditing types-PyYAML (6.0.12.20260906)
�[2K�[32m\�[0m Collecting typing_extensions (4.16.0)
�[2K�[32m\�[0m Auditing typing_extensions (4.16.0)
�[2K�[32m\�[0m Collecting urllib3 (2.8.0)
�[2K�[32m\�[0m Auditing urllib3 (2.8.0)
�[2K�[32m\�[0m Collecting wheel (0.48.0)
�[2K�[32m\�[0m Auditing wheel (0.48.0)
�[2K�[32m\�[0m Collecting yarl (1.25.1)
�[2K�[32m\�[0m Auditing yarl (1.25.1)
�[2K�[32m\�[0m Auditing yarl (1.25.1)
�[?25h
�[1A�[2K```

sourcery-ai[bot]
sourcery-ai Bot approved these changes Oct 17, 2026
View reviewed changes

@sourcery-ai sourcery-ai Bot left a comment

Copy link
Copy Markdown
Contributor

Choose a reason for hiding this comment

The reason will be displayed to describe this comment to others. Learn more.

Hey - I've reviewed your changes and they look great!

Sourcery assessment

Approved.

Sourcery is free for open source - if you like our reviews please consider sharing them ✨

@codecov

codecov Bot commented Oct 17, 2026

Copy link
Copy Markdown

Codecov Report

✅ All modified and coverable lines are covered by tests.

📢 Thoughts on this report? Let us know!

@docdyhr
docdyhr merged commit be30cff into main Oct 17, 2026
25 checks passed
@docdyhr
docdyhr deleted the chore/pre-commit-ruff-0.17.0 branch October 17, 2026 01:12
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Reviewers

@sourcery-ai sourcery-ai[bot] sourcery-ai[bot] approved these changes

Assignees

No one assigned

Labels

None yet

Projects

None yet

Milestone

No milestone

Development

Successfully merging this pull request may close these issues.

1 participant

@docdyhr