Issues

• [C2] Firmware and final assembly outputs remain outside this review

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#17 · Filter by author skot opened on Oct 14, 2026
  1

• [W5] BOM metadata and placement corrections require reconciliation

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#13 · Filter by author skot opened on Oct 14, 2026
  1

• [W4] Via-in-pad process and paste need explicit order review

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#12 · Filter by author skot opened on Oct 14, 2026
  3

• [W1] BOOT directly shorts QSPI chip-select to ground

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#9 · Filter by author skot opened on Oct 14, 2026
  2

• [H5] C26 has little or no VCOMH voltage margin

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#8 · Filter by author skot opened on Oct 14, 2026
  2

• [H4] OLED power sequencing cannot be controlled

  deferredv3-pre-PCBA
  bitaxeorg/bonanzaDisplay#7 · Filter by author skot opened on Oct 14, 2026

• [H3] Crystal identity and load network disagree

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#6 · Filter by author skot opened on Oct 14, 2026
  3

• [H2] 3.3 V GPIO drives a 2.8 V display interface

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#5 · Filter by author skot opened on Oct 14, 2026
  2

• [v3] Synchronize PCB and assembly data with H1/H2/H3/H5 schematic fixes

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#3 · Filter by author skot opened on Oct 14, 2026
  4

• [H1] R39 excessively limits OLED VCI current

  v3-pre-PCBA
  bitaxeorg/bonanzaDisplay#4 · Filter by author skot opened on Oct 14, 2026
  2