zephyr-cp: add ItsyBitsy nRF52840

ports/zephyr-cp/boards/adafruit/itsybitsy_nrf52840_zephyr/autogen_board_info.toml

@@ -0,0 +1,135 @@
+# This file is autogenerated when a board is built. Do not edit. Do commit it to git. Other scripts use its info.
+name = "Adafruit Industries LLC ItsyBitsy nRF52840 Express"
+
+[modules]
+__future__ = true
+_bleio = true # Zephyr board has _bleio
+_eve = false
+_pew = false
+_pixelmap = true # Zephyr board has neopixel_write
+_stage = false
+adafruit_bus_device = true
+adafruit_pixelbuf = true # Zephyr board has neopixel_write
+aesio = true
+alarm = false
+analogbufio = false
+analogio = true # Zephyr board has analogio
+atexit = false
+audiobusio = false
+audiocore = false
+audiodelays = false
+audiofilewriter = false
+audiofilters = false
+audiofreeverb = false
+audioi2sin = false
+audioio = false
+audiomixer = false
+audiomp3 = false
+audiopwmio = false
+audiospeed = false
+aurora_epaper = false
+bitbangio = true
+bitmapfilter = true # Zephyr board has busio
+bitmaptools = true # Zephyr board has busio
+bitops = false
+board = true # Always enabled
+busdisplay = true # Zephyr board has busio
+busio = true # Zephyr board has busio
+camera = false
+canio = false
+codeop = false
+countio = false
+digitalio = true
+displayio = true # Zephyr board has busio
+dotclockframebuffer = false
+dualbank = false
+emmcio = false
+epaperdisplay = true # Zephyr board has busio
+floppyio = false
+fontio = true # Zephyr board has busio
+fourwire = true # Zephyr board has busio
+framebufferio = true # Zephyr board has busio
+frequencyio = false
+getpass = true
+gifio = true # Zephyr board has busio
+gnss = false
+hardwarekey = false
+hashlib = true
+hmac = false
+hostnetwork = false
+i2cdisplaybus = true # Zephyr board has busio
+i2cioexpander = false
+i2ctarget = false
+imagecapture = false
+ipaddress = false
+is31fl3741 = false
+jpegio = true # Zephyr board has busio
+keypad = false
+keypad_demux = false
+locale = false
+lvfontio = true # Zephyr board has busio
+math = true
+max3421e = false
+mcp4822 = false
+mdns = false
+memorymap = false
+memorymonitor = false
+microcontroller = true
+mii = false
+mipidsi = false
+msgpack = true
+neopixel_write = true # Zephyr board has neopixel_write
+nvm = true # Board has NVM partition
+onewireio = false
+os = true
+paralleldisplaybus = false
+picogame = false
+ps2io = false
+pulseio = false
+pwmio = true # Zephyr board has pwmio
+qrio = false
+qspibus = false
+rainbowio = true
+random = true
+rclcpy = false
+rgbmatrix = false
+rotaryio = true # Zephyr board has rotaryio
+rtc = false
+sdcardio = true # Zephyr board has busio
+sdioio = false
+sharpdisplay = true # Zephyr board has busio
+socketpool = false
+spitarget = false
+ssl = false
+storage = true # Zephyr board has flash
+struct = true
+supervisor = true
+synthio = false
+terminalio = true # Zephyr board has busio
+tilepalettemapper = true # Zephyr board has busio
+time = true
+touchio = false
+traceback = true
+uheap = false
+usb = false
+usb_audio = false
+usb_cdc = true
+usb_hid = true
+usb_host = false
+usb_host_bulk = false
+usb_midi = false
+usb_video = false
+ustack = false
+vectorio = true # Zephyr board has busio
+warnings = true
+watchdog = true # Zephyr board has watchdog
+wifi = false
+zephyr_display = false
+zephyr_kernel = false
+zlib = true
+# extmod modules shared with MicroPython
+asyncio = true
+binascii = true
+json = true
+re = true
+select = true

ports/zephyr-cp/boards/adafruit/itsybitsy_nrf52840_zephyr/board.conf

@@ -0,0 +1,17 @@
+CONFIG_BOARD_SERIAL_BACKEND_CDC_ACM=n
+
+# No Zephyr UART console by default (see board.overlay); a CONSOLE=1 build turns
+# it back on in console.conf.
+CONFIG_UART_CONSOLE=n
+CONFIG_LOG_BACKEND_UART=n
+
+# The ItsyBitsy uses the MDBT50Q-1MV2 module (aQFN73 inside), so pin numbers
+# are module pins.
+CONFIG_IOBROKER_PACKAGE_MDBT50Q_1MV2=y
+
+# PWM instances are enabled in board.overlay with disconnected outputs so
+# iobroker can allocate them at runtime for neopixel_write and pwmio.
+CONFIG_PWM=y
+
+# SAADC for analogio testing/use (pads resolve to AIN through iobroker)
+CONFIG_ADC=y