Documentation, host software, firmware and CAD models for the Bink hall-effect keybed and its DevKit board.
The keybed measures every key continuously, about 1500 times a second, and sends key positions, note events with velocity, and temperatures over USB or a 3.3 V UART.
| Folder | Contents |
|---|---|
docs/ |
The host protocol: electrical interface, messages, data rates, start-up and calibration |
BinkComm/ |
C++11 library for the host side of the protocol, with no dependencies |
examples/pico_host/ |
Minimal keybed host on a Raspberry Pi Pico, using BinkComm |
inspector/ |
Desktop tools for inspecting, calibrating and logging a keybed over USB |
firmware/ |
Firmware for the DevKit board (RP2354B): a 12-voice synthesizer and keybed monitor |
keybed/ |
STEP models of the keybed from 1 to 7 octaves, and the TO HOST connector |
To connect a keybed to your own hardware, read the host protocol, then build the Pico example or add BinkComm to your project.
To see what a keybed is doing, or to calibrate one, use the inspector.
To play the DevKit, or to change its sound, see the firmware.
To design an enclosure, see the models and connector.
Everything in this repository is under the MIT License, except:
- The STEP models in
keybed/are for development use only and not for redistribution, seekeybed/LICENSE. - Code from other projects keeps its own license, see
THIRD_PARTY.md.