Issues

• Add docs for running the simulator from a python script

  TexasInstruments/pru-simulator#122 · Filter by author nsaulnier-ti opened on Nov 12, 2026

• tests: test_dashboard_scope reads index.html without an encoding and fails on Windows (cp1252)

  TexasInstruments/pru-simulator#121 · Filter by author tleyrer opened on Nov 12, 2026

• Flaky test: test_run_chunk_after_interval_is_published fails intermittently

  TexasInstruments/pru-simulator#120 · Filter by author tleyrer opened on Nov 12, 2026

• ICSS-M core revision: OpenPRU cheat sheet says V3, #32 and the configs say V4

  TexasInstruments/pru-simulator#119 · Filter by author tleyrer opened on Nov 12, 2026

• AM62x: Add to docs/device_capabilities.md

  TexasInstruments/pru-simulator#115 · Filter by author nsaulnier-ti opened on Nov 11, 2026

• XFR2VBUS & PSI: finish adding features

  TexasInstruments/pru-simulator#113 · Filter by author nsaulnier-ti opened on Nov 9, 2026
  1

• Feature: Add ability for MCP server to attach to a currently running PRU Simulator Instance

  TexasInstruments/pru-simulator#110 · Filter by author nsaulnier-ti opened on Nov 8, 2026

• Three tests still expect RTU0 on AM263x after #82

  TexasInstruments/pru-simulator#107 · Filter by author pratheesh opened on Nov 5, 2026

• Adding VCD waveform export feature for multicore example

  TexasInstruments/pru-simulator#105 · Filter by author y-motwani opened on Nov 3, 2026

• MCP Server Breakpoints do not reset till mcp reset

  TexasInstruments/pru-simulator#103 · Filter by author y-motwani opened on Nov 2, 2026

• Addition of commands supported using MCP Server in Documentation

  TexasInstruments/pru-simulator#101 · Filter by author y-motwani opened on Nov 2, 2026
  1

• Feature: Add support for AM62x

  TexasInstruments/pru-simulator#100 · Filter by author nsaulnier-ti opened on Oct 30, 2026

• Feature: Add INTC

  TexasInstruments/pru-simulator#98 · Filter by author nsaulnier-ti opened on Oct 27, 2026

• Verify read/write latency values against HW tests

  TexasInstruments/pru-simulator#97 · Filter by author nsaulnier-ti opened on Oct 27, 2026

• Feature: Add HW UART peripheral to the simulator

  TexasInstruments/pru-simulator#96 · Filter by author nsaulnier-ti opened on Oct 27, 2026

• Feature: Add TX_PRU support for ICSSG devices

  TexasInstruments/pru-simulator#95 · Filter by author nsaulnier-ti opened on Oct 27, 2026

• IEP: 64-bit mode CMP0 period, >= compare, CMPj_REG0 status clear and AM261x GLOBAL_CFG reset differ from silicon

  TexasInstruments/pru-simulator#91 · Filter by author pratheesh opened on Oct 27, 2026

• AM243x: IEP runs at 0.8 counts per PRU cycle on LP-AM243 (200 MHz), simulator defaults iep_clock_mhz to the PRU clock

  TexasInstruments/pru-simulator#74 · Filter by author pratheesh opened on Oct 18, 2026

• IEP shadow compare mode (CMP_CFG SHADOW_EN) and PWM_EFC_EN status auto-clear are not modelled

  TexasInstruments/pru-simulator#73 · Filter by author pratheesh opened on Oct 18, 2026

• AM243x: ICSSG PWM module (PWM0..3, TRM 6.4.10) is not modelled - IEP compares drive no PWM pins, no trip zone

  TexasInstruments/pru-simulator#72 · Filter by author pratheesh opened on Oct 18, 2026

• AM243x: a PRU_CTRL CYCLE register read costs 6 cycles on silicon, 3 in the simulator

  TexasInstruments/pru-simulator#70 · Filter by author pratheesh opened on Oct 16, 2026

• Breakpoints transfer over program loads

  TexasInstruments/pru-simulator#66 · Filter by author y-motwani opened on Oct 14, 2026

• Feature: Enable C code support for PRU Simulator tool

  TexasInstruments/pru-simulator#65 · Filter by author y-motwani opened on Oct 14, 2026

• Address unresolved review comments from PR #46 (CRC accelerator)

  TexasInstruments/pru-simulator#63 · Filter by author tleyrer opened on Oct 13, 2026

• Multicore Assembly Editor: Removing program from one core incorrectly removes it from all cores

  TexasInstruments/pru-simulator#62 · Filter by author y-motwani opened on Oct 12, 2026