Skip to content

0.6.0: flows and forces, whole-movement camera fit, a trimmed guide, stage growth - #68

Merged
ProjectIdris merged 16 commits into
mainfrom
batch-2
Nov 8, 2026
Merged

ProjectIdris merged 16 commits into
mainfrom
batch-2

Conversation

@ProjectIdris

Copy link
Copy Markdown
Owner

Summary

Version 0.6.0, one batch: flows and forces, a camera that fits a model's whole movement, a trimmed guide, a stage that grows into empty page, and pins inside solid parts.

  • Flows and forces: streams in pulses (surge, beat), a wave travelling along a tube, a pump (a chamber behind one-way valve flaps, via a gate loop), particles that spread, force arrows, field lines (dipole, radial, uniform), drop, pendulum, oscillate and float, damp on any loop, and inclined plane, wedge and screw. Closed loops refuse a wave with a note.
  • Camera fits the whole movement: the rest pose fits the stage, and the swept poses of a loop may use the screen up to its edge. A loop later in the same step is fitted from the start, so a swinging door or a flapping wing stays on screen. Nothing is drawn larger than before.
  • Guide pass: the guide is about 10% smaller, with the gaps live answers found closed: a tube's end isn't attached to the part that travels along it, a heart is drawn with all four chambers and pumped ventricles, a shape name written as an op is read as the add meant, and unbounded slides get min and max.
  • Stage growth: a short stage grows taller, to about 62% of the screen, only into nearly blank page, never over cards or controls, and stops short of taking the last quiet place a note card could use. A stage leaving with a clear no longer flashes the "panel hidden" cue.
  • Pins inside solids: a pin at the hub of a spoked wheel is drawn.
  • Version 0.6.0 (root version fields).

Validation

  • Each part was independently reviewed by a second reviewer, not its author, with fixes rechecked. Each new test was seen failing first.
  • On the combined branch, 263 tests across the affected files pass; typecheck clean.
  • Live answers (Sonnet):
    • Swallow, magnet, boat and pendulum read well. Arm, engine and pulley are no worse.
    • After the guide pass, the heart draws four chambers with moving valve flaps, and the swallow, engine and magnet answers are better. Mean time to first word is unchanged, at 2.76 s.
  • Camera fit on saved answers: a door went from 1.45x its stage to 0.88x, and a shoulder from 1.75x to 0.94x. Still models fit exactly as before.

Review limits

  • One live answer per question; the software tier; mostly 21:9 pages.
  • A load that rises without limit is fitted over one turn.
  • On a page with no quiet place the stage grows a little less than it could.

🤖 Generated with Claude Code

ProjectIdris and others added 16 commits November 8, 2026 19:54
…hat spread, force arrows, field lines, drop, pendulum, oscillate, float, incline, wedge, screw; loops gain gate, float and damp

Illustrative, pure functions of the step clock, each built over the existing loops, joints, couplings and streams; the golden engine test is unchanged.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…nly to how the model stands at rest

A part that swings out of its rest shape (a wing flapped, a door swung toward the viewer) left its stage and, in a wide short stage, the screen: the fit used the rest hull alone. The page now also takes the spheres and boxes at 40 poses spread over the machine's cycle (sweptPoses in the timeline, a pure function of the frame's motion, so frames, clips and the live page agree) and fits all of them together; they are taken again only when the parts or the machine change, so the camera stands still while the model swings.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…at part (the hang point is worked out each frame, through any parents), and is not held back by the mount; field lines draw finer and with clearer heads

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…d a machine that starts later in its step is fitted from the start

A swing 4 times its stage left the resting wing at a fifth of its old size: the swept hulls now fit a frustum widened to the screen's edge from the stage's middle (the rest hull still fits the stage, so nothing is drawn larger than before). A loop written to begin part-way through a step no longer zooms the camera out when it starts: the frame carries the machine as it will be later in the step (ahead) and the swept fit reads that.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…p force)

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…ge has little on it, and a stage a clear is taking away no longer hides what replaces it

A stage shorter than 620 units is made taller in the placer, keeping its width and what it covered, only into page that is almost blank (the added strips: at most 15% inked, 10% controls or figures). Cards and page controls are hard keep-outs; what the answer points at is a preference (a place covering another pointed-at spot is passed over; a spot the stage already covers is ignored). Cards written after keep off the taller stage and the later rectangle holds the earlier, so admission does not flip while the stage eases.

A stage that a clear is taking away (panel.leaving) no longer holds admission space nor pushes arriving surfaces: a chart replacing the model showed "1 panel hidden" for about 0.1 s and its entrance ran hidden.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The guide drops what the per-op lines already say (the extrude, lathe, sweep, loft and shell rules, the long machines and
flows summaries, repeated sentences) and gains the lines the judge sets showed it needed: a heart or bellows is a pump, with
blood as a stream in beats; a tube end that lies on a part follows it, so a part travelling along the tube stays off its ends;
a load that would rise or travel without end gets max; a pendulum hangs from a part that does not slide.

pulley and screw take min and max (the load or nut stops there). A shape written as the op (op force, field, particles) is read
as the add it was meant to be, with a note. A test holds the guide and the lean schema to a size.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…he chamber that squeezes

The first live heart after the pass drew one chamber and a pump (it lost the anatomy); with the chambers named in the line, the
heart is four blobs, a pump on each ventricle with its flaps, and labels.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…ys it covers every shape name

A test holds that sphere, group, tube and array written as an op are rewritten to the add, each with a note.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
…ed card could have

On the bird page the full growth left no spot beside the stage for a note, which then landed over the page's image column. Growth now steps down until a card of about 380 by 150 units still finds a place as quiet as it had before, clear of the grown stage, the strip of its buttons, the controls and the cards already placed. The bird stage grows to 560-580 instead of 620; the CPU and recipe pages are unchanged and a page of dense text still keeps the stage as asked.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
… drawn (the middle of a kit wheel's hub was never labelled)

PanelScene.project treated a point with a closed piece's near face between it and the camera as hidden behind it. The kit wheel's hub is a barrel with a cap set into each end, so a pin at [0,0,0] vanished with a "no visible surface" warning. A point is now also accepted when, going on away from the camera, the ray leaves more of the object's closed surfaces than it enters (it is inside a solid); the middle of a hollow shell is still hidden by its wall.

Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
@ProjectIdris
ProjectIdris merged commit 6b20147 into main Nov 8, 2026
2 checks passed
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

1 participant