chore(release): bump version to 2.0.0b14

README.md

@@ -150,7 +150,7 @@ We now maintain a comprehensive, community-curated **[GitHub Wiki](https://githu
 > [!WARNING]
 > **⚠️ Do NOT use HACS to install beta / pre-release versions!**  
 > In **HACS 2.0+**, pre-release access was moved to Home Assistant entity switches (`switch.myhome_pre_release`) that are disabled by default. Due to upstream Home Assistant registry caching, enabling these switches frequently gets stuck in an *"unavailable"* loop or reverts to *"disabled"*. Furthermore, because pre-releases are built on the active development branch (`v2-phase1-architecture`) while the default branch is `master`, HACS download validation frequently fails with:  
-> `The version 2.0.0b13 for this integration can not be used with HACS`  
+> `The version 2.0.0b14 for this integration can not be used with HACS`  
 > 
 > **To avoid frustration, please use Method 1 (Terminal & SSH) or Method 2 (Manual) below — they take less than 10 seconds and preserve all existing devices, entities, and settings 100% safely.**
 
@@ -166,17 +166,17 @@ cd /config/custom_components
 [ -d myhome.backup ] && mv myhome.backup /config/myhome_backup_old
 # Create a safety backup in /config (outside custom_components) before updating:
 [ -d myhome ] && rm -rf /config/myhome_backup && cp -r myhome /config/myhome_backup
-# Download and install the latest v2.0.0b13 release:
+# Download and install the latest v2.0.0b14 release:
 rm -rf myhome
-wget -O myhome_beta.zip https://github.com/OpenWebNet-HA/MyHOME/releases/download/2.0.0b13/myhome.zip
+wget -O myhome_beta.zip https://github.com/OpenWebNet-HA/MyHOME/releases/download/2.0.0b14/myhome.zip
 unzip -q myhome_beta.zip -d myhome
 rm myhome_beta.zip
 ha core restart
 ```
 
 *(For **Home Assistant Container / Docker**, run on your Docker host:)*
 ```bash
-docker exec -it homeassistant bash -c 'cd /config/custom_components && [ -d myhome.backup ] && mv myhome.backup /config/myhome_backup_old; [ -d myhome ] && rm -rf /config/myhome_backup && cp -r myhome /config/myhome_backup; rm -rf myhome && wget -O myhome_beta.zip https://github.com/OpenWebNet-HA/MyHOME/releases/download/2.0.0b13/myhome.zip && unzip -q myhome_beta.zip -d myhome && rm myhome_beta.zip'
+docker exec -it homeassistant bash -c 'cd /config/custom_components && [ -d myhome.backup ] && mv myhome.backup /config/myhome_backup_old; [ -d myhome ] && rm -rf /config/myhome_backup && cp -r myhome /config/myhome_backup; rm -rf myhome && wget -O myhome_beta.zip https://github.com/OpenWebNet-HA/MyHOME/releases/download/2.0.0b14/myhome.zip && unzip -q myhome_beta.zip -d myhome && rm myhome_beta.zip'
 docker restart homeassistant
 ```
 
@@ -188,7 +188,7 @@ docker restart homeassistant
 ### Method 2: Manual Installation (Archive / Samba)
 
 1. Download the release package:  
-   👉 **[Download myhome.zip (v2.0.0b13)](https://github.com/OpenWebNet-HA/MyHOME/releases/download/2.0.0b13/myhome.zip)** (or browse all [GitHub Releases](https://github.com/OpenWebNet-HA/MyHOME/releases))
+   👉 **[Download myhome.zip (v2.0.0b14)](https://github.com/OpenWebNet-HA/MyHOME/releases/download/2.0.0b14/myhome.zip)** (or browse all [GitHub Releases](https://github.com/OpenWebNet-HA/MyHOME/releases))
 2. Open your Home Assistant configuration directory (via **Samba Share**, **Studio Code Server**, or **File Editor** add-on).
 3. **Important:** If you wish to back up your existing `myhome` folder first, copy it to `/config/myhome_backup/` (**outside** `custom_components/`). **Never rename or copy it to `custom_components/myhome.backup`.**
 4. Extract `myhome.zip` directly into `/config/custom_components/myhome/` (overwriting the existing files).

ROADMAP.md

@@ -6,9 +6,9 @@ Our overarching mission is to provide the most reliable, complete, and high-perf
 
 ---
 
-## 🗺️ Current Delivery Status (Unified Beta v2.0.0b13 & Platinum IQS)
+## 🗺️ Current Delivery Status (Unified Beta v2.0.0b14 & Platinum IQS)
 
-Through intense community collaboration and engineering, the major architectural milestones originally planned across Phases 1, 2, 3, and 4 have been **consolidated, fully implemented, and validated with 100% statement and branch test coverage** in the **v2.0.0b13 Unified Beta**. Furthermore, **Phase 5 (Home Assistant Integration Quality Scale)** has been achieved ahead of schedule, with the integration officially qualifying for the **🏆 Platinum Quality Scale** and strict typing enforced with zero errors across all modules.
+Through intense community collaboration and engineering, the major architectural milestones originally planned across Phases 1, 2, 3, and 4 have been **consolidated, fully implemented, and validated with 100% statement and branch test coverage** in the **v2.0.0b14 Unified Beta**. Furthermore, **Phase 5 (Home Assistant Integration Quality Scale)** has been achieved ahead of schedule, with the integration officially qualifying for the **🏆 Platinum Quality Scale** and strict typing enforced with zero errors across all modules.
 
 ```mermaid
 gantt
@@ -38,7 +38,7 @@ gantt
 
 ---
 
-## 📦 What is Shipped & Operational in v2.0.0b13
+## 📦 What is Shipped & Operational in v2.0.0b14
 
 The following table summarizes the completed architectural features and protocol subsystems verified in the current release:
 

custom_components/myhome/const.py

@@ -11,7 +11,7 @@
 
 ATTR_GATEWAY = "gateway"
 ATTR_MESSAGE = "message"
-INTEGRATION_VERSION = "2.0.0b13"
+INTEGRATION_VERSION = "2.0.0b14"
 # hass.data[DOMAIN] key holding the OWNd version resolved off the event loop
 DATA_OWND_VERSION = "_ownd_version"
 

custom_components/myhome/frontend/myhome-bus-card.js

@@ -6,7 +6,7 @@
  */
 
 // Fallback only: the live value comes from the backend (bus_monitor/info -> integration_version).
-const CARD_VERSION = "2.0.0b13";
+const CARD_VERSION = "2.0.0b14";
 // Default display buffer = the backend ring (bus_monitor.DEFAULT_RING_BUFFER_SIZE), so a
 // backfill after an HA restart keeps the whole startup status sweep (#429).
 const DEFAULT_MAX_FRAMES = 500;

custom_components/myhome/manifest.json

@@ -16,7 +16,7 @@
   "iot_class": "local_push",
   "issue_tracker": "https://github.com/OpenWebNet-HA/MyHOME/issues",
   "requirements": [
-    "OWNd==2.0.0b8"
+    "OWNd==2.0.0b9"
   ],
   "ssdp": [
     {
@@ -90,5 +90,5 @@
       "modelName": "MH201"
     }
   ],
-  "version": "2.0.0b13"
+  "version": "2.0.0b14"
 }

docs/architecture/anti-drift-safeguards.md

@@ -25,7 +25,7 @@ graph TD
         B --> B4[Diagnostics & In-Band Bus Monitor WebSocket]
     end
 
-    A -->|Published via PyPI: OWNd==2.0.0b8| B
+    A -->|Published via PyPI: OWNd==2.0.0b9| B
 ```
 
 ### Why Decouple?
@@ -108,7 +108,7 @@ To keep production and development dependencies in lock-step:
    ```json
    {
      "requirements": [
-       "OWNd==2.0.0b8"
+       "OWNd==2.0.0b9"
      ]
    }
    ```

docs/getting-started/installation.md

@@ -24,7 +24,7 @@ If you have the **Terminal & SSH** add-on installed (or connect via SSH), paste
 
 ```bash
 # Set target beta release version (check https://github.com/OpenWebNet-HA/MyHOME/releases)
-TAG="2.0.0b13"
+TAG="2.0.0b14"
 
 # Download, extract cleanly, verify, and restart Home Assistant
 mkdir -p /config/custom_components && cd /config/custom_components && \

docs/migration/upgrade-from-094.md

@@ -44,7 +44,7 @@ If you have the **Terminal & SSH** add-on installed (or connect via SSH), paste
 
 ```bash
 # Set target beta release version (check https://github.com/OpenWebNet-HA/MyHOME/releases)
-TAG="2.0.0b13"
+TAG="2.0.0b14"
 
 # Download, extract cleanly, verify, and restart Home Assistant
 mkdir -p /config/custom_components && cd /config/custom_components && \

pyproject.toml

@@ -34,7 +34,7 @@ test = [
     "check-wheel-contents>=0.6.0",
     "validate-pyproject[all]>=0.16",
     "ruff>=0.4.0",
-    "OWNd>=2.0.0b6",
+    "OWNd>=2.0.0b9",
 ]
 
 [project.urls]