OpenListTeam · AdingApkgg · Sep 29, 2026
diff --git a/pages/ecosystem/index.md b/pages/ecosystem/index.md
@@ -109,7 +109,6 @@ Provides LuCI support for OpenList, suitable for OpenWRT-based router systems.
 
 Free and Open Source Software licensed under the MIT license.
 :::
-::::
 
 ::: zh-CN
 为 OpenList 提供 LuCI 支持，适用于基于 OpenWRT 的路由器系统。
@@ -342,6 +341,8 @@ Free and Open Source Software licensed under the MIT license.
 
 自由开源软件，MIT协议
 
+:::
+
 ---
 
 ### [jiwangyihao/olist-cdn-preheat ↗](https://github.com/jiwangyihao/olist-cdn-preheat/)

diff --git a/pages/ecosystem/official_worker/guide.md b/pages/ecosystem/official_worker/guide.md
@@ -31,12 +31,14 @@ For a detailed, step-by-step deployment guide (Cloudflare Workers / EdgeOne / ES
 :::: en
 
 > **Note**: If Cloudflare reports "unable to fetch repository content", [Fork](https://github.com/OpenListTeam/OpenList-Worker/fork) the project first, then deploy via the GitHub repository connection.
-> ::::
+
+::::
 
 :::: zh-CN
 
 > **注意**：若 Cloudflare 提示"无法获取存储库内容"，请先 [Fork](https://github.com/OpenListTeam/OpenList-Worker/fork) 本项目，再通过连接到 GitHub 仓库功能部署。
-> ::::
+
+::::
 
 :::: en
 For platform-specific step-by-step guides, see:

diff --git a/pages/ecosystem/official_worker/index.md b/pages/ecosystem/official_worker/index.md
@@ -140,24 +140,24 @@ In addition to the real storages above, virtual/functional drivers such as `Loca
 
 :::en
 
-- [Design Architecture](./architecture) — Tech stack, data storage backend and supported platforms
-- [How to Deploy](./guide) — One-click deploy overview and local development
-  - [Cloudflare Workers](./guide_cfw) — Step-by-step Cloudflare Workers deployment (with screenshots)
-  - [EdgeOne](./guide_eom) — Tencent Cloud EdgeOne deployment
-  - [Alibaba Cloud ESA](./guide_esa) — Alibaba Cloud ESA deployment
-- [Environment Variables](./guide_env) — `DB_FORMAT`, `DB_DRIVER` and all runtime variables
-- [FAQ](./faq) — Common issues and troubleshooting
+- [Design Architecture](/ecosystem/official_worker/basic) — Tech stack, data storage backend and supported platforms
+- [How to Deploy](/ecosystem/official_worker/guide) — One-click deploy overview and local development
+  - [Cloudflare Workers](/ecosystem/official_worker/guide_cfw) — Step-by-step Cloudflare Workers deployment (with screenshots)
+  - [EdgeOne](/ecosystem/official_worker/guide_eom) — Tencent Cloud EdgeOne deployment
+  - [Alibaba Cloud ESA](/ecosystem/official_worker/guide_esa) — Alibaba Cloud ESA deployment
+- [Environment Variables](/ecosystem/official_worker/guide_env) — `DB_FORMAT`, `DB_DRIVER` and all runtime variables
+- [FAQ](/ecosystem/official_worker/about) — Common issues and troubleshooting
   :::
 
 :::zh-CN
 
-- [设计架构](./architecture) — 技术栈、数据存储后端与支持平台
-- [部署方法](./guide) — 一键部署入口与本地开发
-  - [Cloudflare Workers](./guide_cfw) — 分步 Cloudflare Workers 部署教程（含截图）
-  - [EdgeOne](./guide_eom) — 腾讯云 EdgeOne 部署
-  - [阿里云 ESA](./guide_esa) — 阿里云 ESA 部署
-- [配置变量](./guide_env) — `DB_FORMAT`、`DB_DRIVER` 及所有运行时变量
-- [常见问题](./faq) — 常见问题与排查
+- [设计架构](/ecosystem/official_worker/basic) — 技术栈、数据存储后端与支持平台
+- [部署方法](/ecosystem/official_worker/guide) — 一键部署入口与本地开发
+  - [Cloudflare Workers](/ecosystem/official_worker/guide_cfw) — 分步 Cloudflare Workers 部署教程（含截图）
+  - [EdgeOne](/ecosystem/official_worker/guide_eom) — 腾讯云 EdgeOne 部署
+  - [阿里云 ESA](/ecosystem/official_worker/guide_esa) — 阿里云 ESA 部署
+- [配置变量](/ecosystem/official_worker/guide_env) — `DB_FORMAT`、`DB_DRIVER` 及所有运行时变量
+- [常见问题](/ecosystem/official_worker/about) — 常见问题与排查
   :::
 
 ## License { lang="en" }

diff --git a/pages/guide/advanced/mcp.md b/pages/guide/advanced/mcp.md
@@ -232,9 +232,9 @@ OpenList 实现了 MCP **Streamable HTTP** 传输。端点接受：
 
 :::
 
-### Authentication {{ lang="en" }}
+### Authentication { lang="en" }
 
-### 认证 {{ lang="zh-CN" }}
+### 认证 { lang="zh-CN" }
 
 ::: en
 
@@ -248,9 +248,9 @@ MCP 端点复用 OpenList 的认证中间件。请求必须在 `Authorization`
 
 :::
 
-### Session Lifecycle {{ lang="en" }}
+### Session Lifecycle { lang="en" }
 
-### 会话生命周期 {{ lang="zh-CN" }}
+### 会话生命周期 { lang="zh-CN" }
 
 ::: en
 
@@ -272,9 +272,9 @@ MCP 端点复用 OpenList 的认证中间件。请求必须在 `Authorization`
 
 :::
 
-### Protocol Version {{ lang="en" }}
+### Protocol Version { lang="en" }
 
-### 协议版本 {{ lang="zh-CN" }}
+### 协议版本 { lang="zh-CN" }
 
 ::: en
 
@@ -292,9 +292,9 @@ The server returns its protocol version during `initialize` negotiation. Subsequ
 
 :::
 
-### Error Codes {{ lang="en" }}
+### Error Codes { lang="en" }
 
-### 错误码 {{ lang="zh-CN" }}
+### 错误码 { lang="zh-CN" }
 
 ::: en
 

diff --git a/pages/guide/drivers/115.md b/pages/guide/drivers/115.md
@@ -342,6 +342,8 @@ if __name__ == "__main__":
 
 Execute the command and obtain the QR code. Scan the QR code on the APP to obtain `Cookie`
 
+:::
+
 ::: zh-CN
 
 1. 需要安装 [**Python 3.11.x**](https://www.python.org/downloads/) 以上版本

diff --git a/pages/guide/drivers/115_open.md b/pages/guide/drivers/115_open.md
@@ -267,6 +267,8 @@ sequenceDiagram
   115服务器->>OpenList: 返回新的访问令牌+刷新令牌
 ```
 
+:::
+
 ## 4. Notes { lang="en" }
 
 ## 4. 注意事项 { lang="zh-CN" }

diff --git a/pages/guide/drivers/189.md b/pages/guide/drivers/189.md
@@ -28,6 +28,8 @@ The web -side login has been replaced with sliding verification code, **no longe
 
 If you encounter "Device ID does not exist, secondary device verification required",Open the 189 Account website at <https://e.dlife.cn/index.do>, log in, and then disable the Device Lock..
 
+:::
+
 ::: zh-CN
 ::: tip
 Web 端登录已更换为滑动验证码，**不再支持 OCR 与手动输入**，若需要验证码请使用 `添加 Cookie 进行登录` 或使用 `天翼云盘客户端` 驱动

diff --git a/pages/guide/drivers/thunder.md b/pages/guide/drivers/thunder.md
@@ -457,6 +457,8 @@ flowchart TB
     click c1 "../drivers/common.html#webdav-策略"
 ```
 
+:::
+
 ## 3. Thunder X { lang="en" }
 
 ## 3. 迅雷 X { lang="zh-CN" }

diff --git a/pages/guide/installation/desktop.md b/pages/guide/installation/desktop.md
@@ -327,7 +327,7 @@ sudo rpm -i OpenList-Desktop_x.x.x_amd64.rpm
 
 ### 首次启动 { lang="zh-CN" }
 
-::: en
+:::: en
 ::: tip
 It is recommended to run OpenList Desktop with Administrator privileges on first launch to ensure proper service installation and configuration.
 :::
@@ -336,9 +336,9 @@ It is recommended to run OpenList Desktop with Administrator privileges on first
 2. **Service Installation**: Install the OpenList service when prompted
 3. **Storage Configuration**: Configure your first cloud storage connection
 
-:::
+::::
 
-::: zh-CN
+:::: zh-CN
 ::: tip
 建议在首次启动时通过管理员权限运行 OpenList Desktop，以确保正确安装和配置服务。
 :::
@@ -347,7 +347,7 @@ It is recommended to run OpenList Desktop with Administrator privileges on first
 2. **服务安装**：在提示时安装 OpenList 服务
 3. **存储配置**：配置您的第一个云存储连接
 
-:::
+::::
 
 ### Basic Operations { lang="en" }
 

diff --git a/pages/guide/installation/reverse-proxy.md b/pages/guide/installation/reverse-proxy.md
@@ -113,9 +113,9 @@ proxy_max_temp_file_size 0; #加上这一行
 
 :::
 
-::: en
+:::: en
 
-::: note Nginx Host Variables Differences
+::: tip Nginx Host Variables Differences
 
 | Variable             | Description                                      | Includes Port | Notes                                                                                                |
 | -------------------- | ------------------------------------------------ | ------------- | ---------------------------------------------------------------------------------------------------- |
@@ -124,8 +124,9 @@ proxy_max_temp_file_size 0; #加上这一行
 | `$host:$server_port` | Server name + port                               | Yes           | Use this combination when you need to use a non-default port (other than 80 or 443)                  |
 
 :::
+::::
 
-::: zh-CN
+:::: zh-CN
 
 ::: tip Nginx 主机变量区别
 
@@ -136,6 +137,7 @@ proxy_max_temp_file_size 0; #加上这一行
 | `$host:$server_port` | 服务器名称 + 端口                 | 是             | 当需要使用非默认 80、443 端口时，请修改为这个组合    |
 
 :::
+::::
 
 ::: en
 If HTTP/3 is needed, the corresponding `Host` line should be modified to:
@@ -236,7 +238,7 @@ example.com {
 
 1. Login to the aaPanel and add a new website.
 
-::
+:::
 
 ::: zh-CN
 

diff --git a/pages/guide/installation/worker.md b/pages/guide/installation/worker.md
@@ -81,12 +81,14 @@ Click the button below to deploy to the corresponding platform:
 ::: en
 
 > If Cloudflare prompts `无法获取存储库内容`（cannot fetch repository content）, fork this project first, then deploy by connecting to the GitHub repository.
-> :::
+
+:::
 
 ::: zh-CN
 
 > 若 Cloudflare 提示 `无法获取存储库内容`，则您需要先 Fork 本项目，再通过连接到 GitHub 仓库功能部署。
-> :::
+
+:::
 
 ## Initialization { lang="en" }
 
@@ -414,7 +416,7 @@ EdgeOne 通过 `edgeone.json` 支持定时刷新。将 payload 中的 `cron_secr
 
 ## 部署到阿里云 ESA { lang="zh-CN" }
 
-::: en
+:::: en
 OpenList Worker ships a dedicated ESA edge function entry (`esa-entry.ts`), which adapts Alibaba Cloud EdgeKV into the project's KV interface.
 
 ### Build & deploy
@@ -446,9 +448,9 @@ Configure the EdgeKV namespace via the `KV_NAMESPACE` environment variable (defa
 ::: tip
 ESA EdgeKV is eventually consistent. The entry implements a module-level TTL cache (60s) to avoid "saved settings revert after refresh" caused by cross-node sync delay.
 :::
-:::
+::::
 
-::: zh-CN
+:::: zh-CN
 OpenList Worker 内置了专用的 ESA 边缘函数入口（`esa-entry.ts`），将阿里云 EdgeKV 适配为项目的 KV 接口。
 
 ### 构建与部署
@@ -480,7 +482,7 @@ pnpm run build
 ::: tip
 ESA EdgeKV 是最终一致性的。入口实现了带 TTL（60 秒）的模块级缓存，避免跨节点同步延迟导致的「保存设置后刷新复原」问题。
 :::
-:::
+::::
 
 ## Local Development { lang="en" }
 
@@ -542,7 +544,7 @@ pnpm run deploy
 
 ## 常见问题 { lang="zh-CN" }
 
-::: en
+:::: en
 ::: details Cloudflare prompts "cannot fetch repository content"
 Fork the project first, then deploy by connecting to the GitHub repository instead of the direct one-click URL.
 :::
@@ -554,9 +556,9 @@ This is usually a KV/CDN cache consistency issue. The entry already forces `no-c
 ::: details How do I reset the admin password?
 The admin password is set during the install wizard. To reset, you can set `ADMIN_PASS` temporarily and redeploy, or clear the persisted config and re-run the wizard.
 :::
-:::
+::::
 
-::: zh-CN
+:::: zh-CN
 ::: details Cloudflare 提示「无法获取存储库内容」
 请先 Fork 本项目，再通过连接到 GitHub 仓库功能部署，而不是直接使用一键部署 URL。
 :::
@@ -568,7 +570,7 @@ The admin password is set during the install wizard. To reset, you can set `ADMI
 ::: details 如何重置管理员密码？
 管理员密码在安装向导中设置。如需重置，可临时设置 `ADMIN_PASS` 并重新部署，或清空已持久化的配置后重新运行向导。
 :::
-:::
+::::
 
 ## Repository { lang="en" }
 

diff --git a/pages/seeds/design.md b/pages/seeds/design.md
@@ -539,7 +539,8 @@ Core components:
 | `files`       | `CASFile[]` | 多文件时的文件数组（可选扩展）    |
 
 > 单文件用顶层五字段（`name`/`size`/`md5`/`sliceMd5`/`create_time`），与参考项目字节级兼容；多文件用 `files` 数组；`slice_md5s`/`slice_size` 保存逐片 MD5，供天翼云秒传复用。
-> :::::
+
+:::::
 
 ::::: en
 
@@ -613,4 +614,5 @@ Both the Go and TS backends share one data model with identical field names, ens
 | `files`       | `CASFile[]` | per-file array for multi-file (optional extension) |
 
 > Single file uses the top-level five fields (`name`/`size`/`md5`/`sliceMd5`/`create_time`), byte-compatible with the reference project; multiple files use the `files` array; `slice_md5s`/`slice_size` preserve per-piece MD5 for 189pc rapid upload.
-> :::::
+
+:::::
-Original file line number
+Diff line change
@@ Expand Up / @@ -342,6 +342,8 @@ if __name__ == "__main__": @@
     Execute the command and obtain the QR code. Scan the QR code on the APP to obtain `Cookie`
+    :::
     ::: zh-CN
 . 需要安装 [**Python 3.11.x**](https://www.python.org/downloads/) 以上版本
@@ Expand Down @@