diff --git a/embedded/efr32xg25/.gitignore b/embedded/efr32xg25/.gitignore
new file mode 100644
index 000000000..5be089821
--- /dev/null
+++ b/embedded/efr32xg25/.gitignore
@@ -0,0 +1,3 @@
+# slc generate output
+build/
+.wolfcrypt_test.local.slcp
diff --git a/embedded/efr32xg25/README.md b/embedded/efr32xg25/README.md
new file mode 100644
index 000000000..7a0d54427
--- /dev/null
+++ b/embedded/efr32xg25/README.md
@@ -0,0 +1,194 @@
+# wolfCrypt test and benchmark on EFR32xG25
+
+Runs the wolfCrypt algorithm self-test and benchmark on an EFR32xG25 with crypto routed to the Secure Element through the wolfSSL crypto callback port. Builds headlessly with `slc-cli` and GNU Arm - no Simplicity Studio GUI needed.
+
+For the port itself, including which algorithms are offloaded and the Secure Vault key management API, see [wolfcrypt/src/port/silabs/README.md](https://github.com/wolfSSL/wolfssl/blob/master/wolfcrypt/src/port/silabs/README.md) in the wolfSSL repository.
+
+## wolfSSL source
+
+This project compiles the wolfSSL sources directly - there is no prebuilt library. `build.sh` expects a wolfSSL checkout beside `wolfssl-examples`:
+
+```
+GitHub/
+  wolfssl/
+  wolfssl-examples/embedded/efr32xg25/
+```
+
+Point `WOLFSSL_ROOT` somewhere else if yours does not sit there:
+
+```sh
+WOLFSSL_ROOT=/path/to/wolfssl ./build.sh
+```
+
+The Secure Element crypto callback port arrived in wolfSSL [PR 11267](https://github.com/wolfSSL/wolfssl/pull/11267); until that is in a release, use a checkout that contains it.
+
+## Hardware
+
+An xG25 radio board (BRD4270B, BRD4271A or BRD4272A) on a BRD4002A/BRD4001A mainboard. All three radio boards carry `EFR32FG25B222F1920IM56`: Series 2 Config 5, Secure Vault **High**, 1920 KB flash. Set `BOARD` if yours is not the default BRD4270B:
+
+```sh
+BOARD=brd4271a ./build.sh
+```
+
+The application prints the SE firmware version and the detected Secure Vault level at startup, so a captured log records which silicon produced the numbers under it.
+
+## Toolchain
+
+Install headlessly with Silicon Labs Tool (SLT). As of SLC-CLI v6 the CLI is no longer a direct download; SLT fetches it along with the SDK, GNU Arm and Commander from a recipe:
+
+```sh
+mkdir -p ~/silabs && cd ~/silabs
+wget -O slt-cli.zip \
+  "https://www.silabs.com/documents/public/software/slt-cli-1.2.1-linux-x64.zip"
+unzip -o slt-cli.zip && chmod +x slt
+cat > pkg.slt <<'RECIPE'
+[dependency]
+simplicity-sdk = "~"
+slc-cli = "~"
+gcc-arm-none-eabi = "~"
+commander = "~"
+RECIPE
+./slt install
+```
+
+Check the current SLT version on the [command line development page](https://www.silabs.com/software-and-tools/simplicity-studio/configurator-command-line-development). `build.sh` and `flash.sh` read `~/.silabs/sdks.json` and `~/.silabs/tools.json` to locate everything, so no paths are hardcoded. Override `SDK`, `SLC`, `GCC_DIR`, `JAVA_DIR` or `COMMANDER` in the environment if your install lives elsewhere; the scripts say so by name if a registry is missing or a tool was never installed.
+
+Developed against Simplicity SDK 2026.6.1 (platform 6.0.0), slc-cli 6.0.23, Commander 1.24.3, GNU Arm 14.2.rel1.
+
+## Build and flash
+
+```sh
+./build.sh          # slc generate + make, output in ./build
+./flash.sh          # commander device info, flash, reset
+```
+
+Then read the VCOM output at 115200 8N1. On a bench running the `uart-monitor` daemon, tail its log rather than opening the port directly.
+
+## What to expect
+
+`wolfcrypt_test` must report a full PASS. Because `WOLFSSL_SILABS_CRYPTOCB` points `WC_USE_DEVID` at the SE device, every algorithm the port claims runs on the Secure Element, so a PASS is direct evidence the callback is correct against the known-answer vectors.
+
+The benchmark then runs each algorithm twice, labelling rows `HW` and `SW`, which gives a hardware-versus-software comparison in one run.
+
+## Measured results
+
+Captured on an **EFR32FG25B222F1920IM56** (Secure Vault High, SE firmware 2.2.0) with this project, wolfSSL 5.9.2. `wolfcrypt_test` reports a **full PASS** in both builds below; the software/Secure Element pairs are the `HW` and `SW` rows the benchmark prints in one run.
+
+Both builds define the `--enable-harden` options (`ECC_TIMING_RESISTANT`, `WC_RSA_BLINDING`), so these are hardened numbers. They cost nothing measurable here: this configuration routes P-256 through `WOLFSSL_SP_MATH_ALL`/`WOLFSSL_HAVE_SP_ECC`, which is already constant time, and every ECC and RSA row moved by less than 0.3% when the options were added.
+
+The two software columns are two builds of this project. **Software (C)** is what you get out of the box. **Software (Thumb2 asm)** additionally enables the `WOLFSSL_ARMASM` block near the top of `user_settings.h` -- flip its `#if 0` to `#if 1` to reproduce it. Both builds already use `WOLFSSL_SP_ARM_CORTEX_M_ASM` for ECC, so the ECC rows do not move.
+
+| Algorithm | Software (C) | Software (Thumb2 asm) | Secure Element | SE vs C | SE vs asm |
+|---|---|---|---|---|---|
+| RNG SHA-256 DRBG | 281 KiB/s | 408 KiB/s | **89 KiB/s** | **0.3x** | **0.2x** |
+| AES-128-CBC-enc | 856 KiB/s | 986 KiB/s | **2.63 MiB/s** | **3.2x** | **2.7x** |
+| AES-128-CBC-dec | 854 KiB/s | 985 KiB/s | **2.65 MiB/s** | **3.2x** | **2.8x** |
+| AES-192-CBC-enc | 722 KiB/s | 826 KiB/s | **2.60 MiB/s** | **3.7x** | **3.2x** |
+| AES-192-CBC-dec | 722 KiB/s | 820 KiB/s | **2.59 MiB/s** | **3.7x** | **3.2x** |
+| AES-256-CBC-enc | 627 KiB/s | 710 KiB/s | **2.58 MiB/s** | **4.2x** | **3.7x** |
+| AES-256-CBC-dec | 626 KiB/s | 712 KiB/s | **2.59 MiB/s** | **4.2x** | **3.7x** |
+| AES-128-GCM-enc | 293 KiB/s | 629 KiB/s | **2.37 MiB/s** | **8.3x** | **3.9x** |
+| AES-128-GCM-dec | 291 KiB/s | 626 KiB/s | **2.26 MiB/s** | **8.0x** | **3.7x** |
+| AES-192-GCM-enc | 275 KiB/s | 558 KiB/s | **2.38 MiB/s** | **8.9x** | **4.4x** |
+| AES-192-GCM-dec | 274 KiB/s | 556 KiB/s | **2.24 MiB/s** | **8.4x** | **4.1x** |
+| AES-256-GCM-enc | 260 KiB/s | 502 KiB/s | **2.38 MiB/s** | **9.4x** | **4.8x** |
+| AES-256-GCM-dec | 258 KiB/s | 501 KiB/s | **2.23 MiB/s** | **8.8x** | **4.6x** |
+| AES-128-GCM-enc-no_AAD | 296 KiB/s | 632 KiB/s | **2.44 MiB/s** | **8.4x** | **3.9x** |
+| AES-128-GCM-dec-no_AAD | 294 KiB/s | 630 KiB/s | **2.28 MiB/s** | **7.9x** | **3.7x** |
+| AES-192-GCM-enc-no_AAD | 278 KiB/s | 560 KiB/s | **2.41 MiB/s** | **8.9x** | **4.4x** |
+| AES-192-GCM-dec-no_AAD | 276 KiB/s | 559 KiB/s | **2.30 MiB/s** | **8.5x** | **4.2x** |
+| AES-256-GCM-enc-no_AAD | 262 KiB/s | 505 KiB/s | **2.35 MiB/s** | **9.2x** | **4.8x** |
+| AES-256-GCM-dec-no_AAD | 261 KiB/s | 503 KiB/s | **2.23 MiB/s** | **8.8x** | **4.5x** |
+| AES-128-ECB-enc | 876 KiB/s | 992 KiB/s | **2.84 MiB/s** | **3.3x** | **2.9x** |
+| AES-128-ECB-dec | 882 KiB/s | 988 KiB/s | **2.77 MiB/s** | **3.2x** | **2.9x** |
+| AES-192-ECB-enc | 737 KiB/s | 824 KiB/s | **2.74 MiB/s** | **3.8x** | **3.4x** |
+| AES-192-ECB-dec | 741 KiB/s | 833 KiB/s | **2.79 MiB/s** | **3.9x** | **3.4x** |
+| AES-256-ECB-enc | 638 KiB/s | 711 KiB/s | **2.70 MiB/s** | **4.3x** | **3.9x** |
+| AES-256-ECB-dec | 640 KiB/s | 710 KiB/s | **2.71 MiB/s** | **4.3x** | **3.9x** |
+| AES-128-CTR | 852 KiB/s | 977 KiB/s | **2.63 MiB/s** | **3.2x** | n/a |
+| AES-192-CTR | 720 KiB/s | 820 KiB/s | **2.62 MiB/s** | **3.7x** | n/a |
+| AES-256-CTR | 625 KiB/s | 705 KiB/s | **2.63 MiB/s** | **4.3x** | n/a |
+| AES-CCM-enc | 426 KiB/s | 460 KiB/s | **2.20 MiB/s** | **5.3x** | **4.9x** |
+| AES-CCM-dec | 425 KiB/s | 459 KiB/s | **2.14 MiB/s** | **5.1x** | **4.8x** |
+| AES-CCM-enc-no_AAD | 426 KiB/s | 460 KiB/s | **2.20 MiB/s** | **5.3x** | **4.9x** |
+| AES-CCM-dec-no_AAD | 425 KiB/s | 459 KiB/s | **2.11 MiB/s** | **5.1x** | **4.7x** |
+| SHA-1 | 3.91 MiB/s | 3.92 MiB/s | **3.63 MiB/s** | **0.9x** | **0.9x** |
+| SHA-224 | 1.23 MiB/s | 1.99 MiB/s | **3.67 MiB/s** | **3.0x** | **1.8x** |
+| SHA-256 | 1.23 MiB/s | 1.99 MiB/s | **3.67 MiB/s** | **3.0x** | **1.8x** |
+| AES-128-CMAC | 793 KiB/s | 856 KiB/s | **2.45 MiB/s** | **3.2x** | **2.9x** |
+| AES-256-CMAC | 593 KiB/s | 640 KiB/s | **2.40 MiB/s** | **4.1x** | **3.8x** |
+| HMAC-SHA-1 | 3.87 MiB/s | 3.87 MiB/s | **3.01 MiB/s** | **0.8x** | **0.8x** |
+| HMAC-SHA-224 | 1.22 MiB/s | 1.97 MiB/s | **3.04 MiB/s** | **2.5x** | **1.5x** |
+| HMAC-SHA-256 | 1.22 MiB/s | 1.97 MiB/s | **3.04 MiB/s** | **2.5x** | **1.5x** |
+| ECC 256 key gen | 125.4 ops/s | 125.3 ops/s | **180.6 ops/s** | **1.4x** | **1.4x** |
+| ECDHE 256 agree | 65.4 ops/s | 65.4 ops/s | **179.8 ops/s** | **2.7x** | **2.7x** |
+| ECDSA 256 sign | 67.8 ops/s | 67.8 ops/s | **173.4 ops/s** | **2.6x** | **2.6x** |
+| ECDSA 256 verify | 41.9 ops/s | 41.9 ops/s | **163.8 ops/s** | **3.9x** | **3.9x** |
+
+Where the Secure Element is **slower** the numbers are reported as measured. SHA-1 and HMAC-SHA-1 are cheap enough on this Cortex-M33 that the SE round trip costs more than it saves. The **RNG** row compares asking the SE for every byte against a SHA-256 DRBG seeded once from that same SE TRNG - seeding a DRBG is the normal way to use a hardware entropy source, so the `HW` row is raw TRNG throughput rather than the cost of getting random data. **AES-GCM** gains the most, up to **9.4x**.
+
+The RNG row is the only one that moves appreciably between runs: the DRBG reseeds from the SE TRNG at a fixed generate count and one reseed is expensive at 89 KiB/s, so the software figure swings by roughly 15% depending on whether a reseed lands inside the one-second measurement window.
+
+**AES-CTR** reads `n/a` in the last column because the port deliberately declines CTR when `WOLFSSL_ARMASM` is defined -- the Thumb2 keystream remainder and the SE's do not line up -- so that build has no Secure Element CTR number.
+
+**RSA** and **DH** are omitted because Series 2 has no RSA hardware, so both columns run in software. **SHA-384/512** likewise, and they are always left to software (see the port README). **ChaCha20-Poly1305** has no paired row because the benchmark drives it through the one-shot `wc_ChaCha20Poly1305_Encrypt()`, which carries no `devId` and so always runs in software. The pre-keyed API the TLS record layer uses does carry one, and that path is offloaded.
+
+To check the software fallback path, offload a subset by adding one or more engine macros to `user_settings.h` (for example only `WOLFSSL_SILABS_CRYPTOCB_HASH`) and re-run: everything else must still pass, in software.
+
+## TLS 1.3 over the Secure Element
+
+Flip the `WOLFSSL_XG25_TLS13` block at the top of `user_settings.h` to `#if 1`
+and rebuild. The application then runs `tls13_test.c` between the wolfCrypt
+test and the benchmark: a client and a server, both on the device, wired
+together through two in-memory byte queues, with the Secure Element `devId` set
+on both. It runs the handshake once per TLS 1.3 cipher suite and then pushes
+application data through the record layer.
+
+This covers ground the known answer vectors cannot. Handshake and record
+buffers are cursors into a larger buffer, so the engines see arbitrary byte
+offsets rather than aligned stack arrays, and one cipher object is reused
+across many chained records, so any state the port fails to carry between calls
+shows up as a decrypt failure instead of passing on a single shot.
+
+The three suites cover different engines. `TLS13-AES128-GCM-SHA256` drives the
+key schedule and transcript hash through the Secure Element, while
+`TLS13-AES256-GCM-SHA384` runs those in software, so between them they cover
+the offloaded and the fallback hash path. `TLS13-CHACHA20-POLY1305-SHA256`
+covers the ChaCha20-Poly1305 record cipher, which the AES suites never reach.
+
+Measured result on the kit:
+
+```
+--- TLS 1.3 over the Secure Element ---
+  [TLS13-AES128-GCM-SHA256]
+  handshake OK: TLSv1.3 TLS_AES_128_GCM_SHA256
+  record layer OK: 9 payloads, 1 to 255 bytes
+  [TLS13-AES256-GCM-SHA384]
+  handshake OK: TLSv1.3 TLS_AES_256_GCM_SHA384
+  record layer OK: 9 payloads, 1 to 255 bytes
+  [TLS13-CHACHA20-POLY1305-SHA256]
+  handshake OK: TLSv1.3 TLS_CHACHA20_POLY1305_SHA256
+  record layer OK: 9 payloads, 1 to 255 bytes
+tls13_test returned 0 (PASS)
+```
+
+The ChaCha suite is the one that needs the `devId` carried on the cipher
+object: the record layer keys a `ChaCha` once per epoch and then calls the
+pre-keyed API, so without a `devId` on that object there is nothing to route
+on. Instrumenting the port's dispatch during this run counts 28
+ChaCha20-Poly1305 requests reaching the Secure Element and 28 handled there,
+with no software fallback.
+
+The kit has no battery-backed real time clock, so `app.c` supplies a
+`_gettimeofday()` seeded from the build date, overriding newlib's weak stub.
+Without it `time()` returns -1, every certificate reads as not yet valid and
+the CA fails to load with `ASN_BEFORE_DATE_E` (-150). That clock is good enough
+for a self-contained demo and nothing more: a device that cannot tell the time
+cannot tell a valid certificate from an expired one, so a real design needs an
+RTC, a time server, or a provisioned time that an attacker cannot move.
+
+## Notes
+
+* The SE firmware must be recent enough for the SE Manager commands used. xG25 is Series 2 Config 5, so it takes the `s2c5` firmware package - not the `s2c1` package referenced by older wolfSSL SiLabs documentation. Check with `commander device info` and upgrade with `commander flash` if needed.
+* `user_settings.h` is shared by the library and the application, as wolfSSL requires. Changing feature macros in one and not the other corrupts struct layouts at runtime.
+* RSA has no hardware support on Series 2 and stays in software; the benchmark rows for it are software timings.
diff --git a/embedded/efr32xg25/app.c b/embedded/efr32xg25/app.c
new file mode 100644
index 000000000..7f6e86a35
--- /dev/null
+++ b/embedded/efr32xg25/app.c
@@ -0,0 +1,216 @@
+/* app.c
+ *
+ * Copyright (C) 2006-2026 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+/* wolfCrypt test and benchmark entry point for the EFR32xG25. */
+
+#include <stdio.h>
+
+#include <wolfssl/wolfcrypt/settings.h>
+#include <wolfssl/wolfcrypt/error-crypt.h>
+#include <wolfssl/wolfcrypt/logging.h>
+#include <wolfssl/version.h>
+#ifdef WOLFSSL_XG25_TLS13
+    #include <wolfssl/ssl.h>
+#endif
+
+#include <sl_se_manager.h>
+#include <sl_se_manager_util.h>
+#include <sl_sleeptimer.h>
+
+#ifdef WOLFSSL_XG25_TLS13
+#include <sys/time.h>
+#endif
+
+#ifdef WOLFSSL_XG25_TLS13
+/* The kit has no RTC and newlib's _gettimeofday is a weak stub that fails, so
+ * time() returns -1 and every certificate looks not-yet-valid
+ * (ASN_BEFORE_DATE_E). Seed a clock from the build date and let the sleep
+ * timer advance it, so date validation can stay on.
+ *
+ * Adequate for a self-contained demo and nothing more: a device that cannot
+ * tell the time cannot tell a valid certificate from an expired one. A real
+ * design needs an RTC or a provisioned time, not attacker-controlled. */
+
+/* Days from 1970-01-01 to y-m-d, proleptic Gregorian, for y >= 1970. */
+static long xg25_days_from_civil(long y, long m, long d)
+{
+    long era, yoe, doy, doe;
+
+    y -= (m <= 2);
+    era = ((y >= 0) ? y : (y - 399)) / 400;
+    yoe = y - era * 400;
+    doy = (153 * (m + ((m > 2) ? -3 : 9)) + 2) / 5 + d - 1;
+    doe = yoe * 365 + yoe / 4 - yoe / 100 + doy;
+    return era * 146097 + doe - 719468;
+}
+
+/* Seconds since the epoch for __DATE__ ("Mmm dd yyyy"), midnight UTC. Derived
+ * from the build so it cannot drift out of the test certificates' validity
+ * window the way a hardcoded constant would. */
+static long xg25_build_epoch(void)
+{
+    static const char months[] = "JanFebMarAprMayJunJulAugSepOctNovDec";
+    const char* bd = __DATE__;
+    long mon = 0;
+    long day, year;
+    int i;
+
+    for (i = 0; i < 12; i++) {
+        if (bd[0] == months[i * 3] &&
+            bd[1] == months[i * 3 + 1] &&
+            bd[2] == months[i * 3 + 2]) {
+            mon = i + 1;
+            break;
+        }
+    }
+    if (mon == 0) {
+        mon = 1;
+    }
+
+    day = (bd[4] == ' ') ? (bd[5] - '0')
+                         : ((bd[4] - '0') * 10 + (bd[5] - '0'));
+    year = (bd[7] - '0') * 1000 + (bd[8] - '0') * 100 +
+           (bd[9] - '0') * 10 + (bd[10] - '0');
+
+    return xg25_days_from_civil(year, mon, day) * 86400L;
+}
+
+/* Strong override of newlib's weak stub. */
+int _gettimeofday(struct timeval* tv, void* tzvp)
+{
+    (void)tzvp;
+    if (tv == NULL) {
+        return -1;
+    }
+    tv->tv_sec = (time_t)(xg25_build_epoch() +
+        (long)(sl_sleeptimer_get_tick_count64() /
+               sl_sleeptimer_get_timer_frequency()));
+    tv->tv_usec = 0;
+    return 0;
+}
+#endif /* WOLFSSL_XG25_TLS13 */
+
+extern int wolfcrypt_test(void* args);
+extern int benchmark_test(void* args);
+#ifdef WOLFSSL_XG25_TLS13
+extern int xg25_tls13_test(void);
+#endif
+
+/* The benchmark needs a coarse wall clock. Bench iterations are sized in
+ * BENCH_EMBEDDED mode, so a low resolution tick is adequate. */
+double current_time(int reset)
+{
+    (void)reset;
+    return (double)sl_sleeptimer_get_tick_count64()
+           / (double)sl_sleeptimer_get_timer_frequency();
+}
+
+/* Report the Secure Element firmware version and the part's security level, so
+ * a captured log says which silicon produced the numbers below it. */
+static void print_se_info(void)
+{
+    sl_se_command_context_t cmd = SL_SE_COMMAND_CONTEXT_INIT;
+    uint32_t version = 0;
+
+    if (sl_se_get_se_version(&cmd, &version) == SL_STATUS_OK) {
+        printf("SE firmware  : %lu.%lu.%lu\n",
+            (unsigned long)((version >> 16) & 0xFF),
+            (unsigned long)((version >> 8) & 0xFF),
+            (unsigned long)(version & 0xFF));
+    }
+    else {
+        printf("SE firmware  : unavailable\n");
+    }
+
+#if defined(_SILICON_LABS_SECURITY_FEATURE) && \
+    (_SILICON_LABS_SECURITY_FEATURE == _SILICON_LABS_SECURITY_FEATURE_VAULT)
+    printf("Secure Vault : High\n");
+#else
+    printf("Secure Vault : Mid (SHA-384/512, P-384/521, ChaCha20-Poly1305,\n"
+           "               the SE KDFs and wrapped keys run in software)\n");
+#endif
+}
+
+void app_init(void)
+{
+    int ret;
+
+    printf("\n\nwolfSSL %s - EFR32xG25 Secure Element crypto callback\n",
+        LIBWOLFSSL_VERSION_STRING);
+    /* Name the software backend: it is what the benchmark's SW column
+     * measures, and what the SE is being compared against. */
+#ifdef WOLFSSL_ARMASM
+    printf("Software path: Thumb2 assembly (WOLFSSL_ARMASM)\n");
+#else
+    printf("Software path: C\n");
+#endif
+    print_se_info();
+
+#ifdef DEBUG_WOLFSSL
+    wolfSSL_Debugging_ON();
+#endif
+
+    /* In TLS mode init and cleanup must pair at the library layer: a
+     * WOLFSSL_CTX takes its own wolfCrypt reference via wolfSSL_Init(), so a
+     * lone wolfCrypt_Cleanup() would leak the TLS globals and one SE
+     * registration. */
+#ifdef WOLFSSL_XG25_TLS13
+    ret = wolfSSL_Init();
+    if (ret != WOLFSSL_SUCCESS) {
+        printf("wolfSSL_Init failed: %d\n", ret);
+        return;
+    }
+    ret = 0;
+#else
+    ret = wolfCrypt_Init();
+#endif
+    if (ret != 0) {
+        printf("wolfCrypt_Init failed: %d\n", ret);
+        return;
+    }
+
+    printf("\n--- wolfCrypt test ---\n");
+    ret = wolfcrypt_test(NULL);
+    printf("wolfcrypt_test returned %d (%s)\n", ret,
+        (ret == 0) ? "PASS" : "FAIL");
+
+#ifdef WOLFSSL_XG25_TLS13
+    printf("\n--- TLS 1.3 over the Secure Element ---\n");
+    ret = xg25_tls13_test();
+    printf("tls13_test returned %d (%s)\n", ret, (ret == 0) ? "PASS" : "FAIL");
+#endif
+
+    printf("\n--- wolfCrypt benchmark ---\n");
+    printf("Rows marked HW run on the Secure Element, SW in software.\n");
+    ret = benchmark_test(NULL);
+    printf("benchmark_test returned %d\n", ret);
+
+#ifdef WOLFSSL_XG25_TLS13
+    wolfSSL_Cleanup();
+#else
+    wolfCrypt_Cleanup();
+#endif
+    printf("\n--- done ---\n");
+}
+
+void app_process_action(void)
+{
+}
diff --git a/embedded/efr32xg25/build.sh b/embedded/efr32xg25/build.sh
new file mode 100755
index 000000000..dead280ef
--- /dev/null
+++ b/embedded/efr32xg25/build.sh
@@ -0,0 +1,120 @@
+#!/usr/bin/env bash
+# Generate and build the EFR32xG25 wolfCrypt test/benchmark project headlessly.
+# Requires the Silicon Labs toolchain installed via SLT (see README.md).
+set -euo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+BOARD="${BOARD:-brd4270b}"
+BUILD_DIR="${BUILD_DIR:-$HERE/build}"
+
+# wolfSSL sources are pulled in by relative path from wolfcrypt_test.slcp, which
+# assumes a wolfssl checkout sitting beside wolfssl-examples. Point WOLFSSL_ROOT
+# somewhere else and the project file is rewritten with absolute paths into the
+# build directory, leaving the checked-in one untouched.
+WOLFSSL_ROOT="${WOLFSSL_ROOT:-$HERE/../../../wolfssl}"
+if [ ! -f "$WOLFSSL_ROOT/wolfcrypt/src/aes.c" ]; then
+    echo "No wolfSSL checkout at '$WOLFSSL_ROOT'." >&2
+    echo "Clone wolfSSL beside wolfssl-examples, or set WOLFSSL_ROOT." >&2
+    exit 1
+fi
+WOLFSSL_ROOT="$(cd "$WOLFSSL_ROOT" && pwd -P)"
+
+# Resolve the SLT-managed toolchain from its own registries rather than
+# hardcoding conan hash directories, which change on reinstall.
+SILABS_HOME="${SILABS_HOME:-$HOME/.silabs}"
+SLT_HINT="Install the toolchain with 'slt install' (see README.md), or set SDK, SLC, GCC_DIR and JAVA_DIR explicitly."
+
+# A missing registry, a truncated one, or a tool that was never installed all
+# have the same fix, so say what it is instead of letting python traceback.
+json_path() { # json_path <file> <key>
+    local out
+    if [ ! -r "$1" ]; then
+        echo "Cannot read SLT registry '$1'." >&2
+        echo "$SLT_HINT" >&2
+        return 1
+    fi
+    out="$(python3 -c "import json,sys
+try:
+    d = json.load(open(sys.argv[1]))
+except ValueError as e:
+    sys.exit('%s: not valid JSON: %s' % (sys.argv[1], e))
+try:
+    print(d[sys.argv[2]][0]['path'] if isinstance(d, dict)
+          else d[0]['extensions'][0]['path'])
+except (KeyError, IndexError, TypeError):
+    sys.exit('%s: no entry for %s' % (sys.argv[1], sys.argv[2]))" "$1" "$2")" || {
+        echo "$SLT_HINT" >&2
+        return 1
+    }
+    printf '%s\n' "$out"
+}
+
+SDK="${SDK:-$(json_path "$SILABS_HOME/sdks.json" simplicity-sdk)}"
+SLC="${SLC:-$(json_path "$SILABS_HOME/tools.json" slc-cli)/slc}"
+GCC_DIR="${GCC_DIR:-$(json_path "$SILABS_HOME/tools.json" gcc-arm-none-eabi)/bin}"
+JAVA_DIR="${JAVA_DIR:-$(json_path "$SILABS_HOME/tools.json" java21)/bin}"
+
+export PATH="$JAVA_DIR:$GCC_DIR:$PATH"
+ARM_GCC_DIR="$(dirname "$GCC_DIR")"
+export ARM_GCC_DIR
+
+echo "SDK   : $SDK"
+echo "slc   : $SLC"
+echo "gcc   : $(arm-none-eabi-gcc -dumpversion)"
+echo "board : $BOARD"
+
+# BUILD_DIR is deleted below, so refuse anything that is not clearly ours.
+# It must resolve beneath this example directory: that rules out "/", $HOME,
+# the repository root and any unrelated project someone points the variable at.
+BUILD_PARENT="$(cd "$(dirname "$BUILD_DIR")" 2>/dev/null && pwd -P || true)"
+if [ -z "$BUILD_PARENT" ]; then
+    echo "BUILD_DIR parent does not exist: $BUILD_DIR" >&2
+    exit 1
+fi
+BUILD_ABS="$BUILD_PARENT/$(basename "$BUILD_DIR")"
+case "$BUILD_ABS" in
+    "$HERE"/?*) ;;
+    *)
+        echo "Refusing to delete '$BUILD_ABS'" >&2
+        echo "BUILD_DIR must be inside $HERE" >&2
+        exit 1
+        ;;
+esac
+
+rm -rf "$BUILD_ABS"
+mkdir -p "$BUILD_ABS"
+BUILD_DIR="$BUILD_ABS"
+
+# Point the project file at WOLFSSL_ROOT. slc resolves every path: entry
+# relative to the .slcp itself, so a non-default root means rewriting that one
+# prefix to a path relative to this directory - and the copy has to stay here,
+# because app.c and user_settings.h are relative to it too.
+SLCP="$HERE/wolfcrypt_test.slcp"
+WOLFSSL_REL="$(realpath --relative-to="$HERE" "$WOLFSSL_ROOT")"
+if [ "$WOLFSSL_REL" != "../../../wolfssl" ]; then
+    SLCP="$HERE/.wolfcrypt_test.local.slcp"
+    sed "s|\.\./\.\./\.\./wolfssl|$WOLFSSL_REL|g" \
+        "$HERE/wolfcrypt_test.slcp" > "$SLCP"
+    echo "wolfSSL: $WOLFSSL_ROOT"
+fi
+
+"$SLC" signature trust --sdk "$SDK" >/dev/null 2>&1 || true
+
+"$SLC" generate \
+    --sdk "$SDK" \
+    --project-file "$SLCP" \
+    --output-type makefile \
+    --with "$BOARD" \
+    --destination "$BUILD_DIR" \
+    --new-project --force
+
+# slc only emits include directories that live inside the project, so add the
+# wolfSSL root here. Appending to the generated fragment keeps the SDK's own
+# INCLUDES intact, which passing INCLUDES= on the make command line would not.
+printf '\nINCLUDES += -I%s\n' "$WOLFSSL_ROOT" >> "$BUILD_DIR/wolfcrypt_test.project.mak"
+
+make -C "$BUILD_DIR" -f wolfcrypt_test.Makefile -j"$(nproc)"
+
+echo
+echo "Artifacts:"
+find "$BUILD_DIR" -name "*.hex" -o -name "*.s37" -o -name "*.bin" | sed 's/^/  /'
diff --git a/embedded/efr32xg25/flash.sh b/embedded/efr32xg25/flash.sh
new file mode 100755
index 000000000..0a2eaea50
--- /dev/null
+++ b/embedded/efr32xg25/flash.sh
@@ -0,0 +1,57 @@
+#!/usr/bin/env bash
+# Flash the built image to an attached EFR32xG25 kit and report the device.
+set -euo pipefail
+
+HERE="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
+BUILD_DIR="${BUILD_DIR:-$HERE/build}"
+SILABS_HOME="${SILABS_HOME:-$HOME/.silabs}"
+
+# Resolve Commander from the SLT registry. The path goes in as an argument
+# rather than being pasted into the program text, so a directory holding a
+# quote is read as a path and nothing else.
+TOOLS_JSON="$SILABS_HOME/tools.json"
+if [ -z "${COMMANDER:-}" ]; then
+    if [ ! -r "$TOOLS_JSON" ]; then
+        echo "Cannot read SLT registry '$TOOLS_JSON'." >&2
+        echo "Install the toolchain with 'slt install' (see README.md), or set COMMANDER explicitly." >&2
+        exit 1
+    fi
+    COMMANDER_DIR="$(python3 -c "import json,sys
+try:
+    d = json.load(open(sys.argv[1]))
+except ValueError as e:
+    sys.exit('%s: not valid JSON: %s' % (sys.argv[1], e))
+try:
+    print(d['commander'][0]['path'])
+except (KeyError, IndexError, TypeError):
+    sys.exit('%s: no entry for commander' % (sys.argv[1],))" "$TOOLS_JSON")" || {
+        echo "Install the toolchain with 'slt install' (see README.md), or set COMMANDER explicitly." >&2
+        exit 1
+    }
+    COMMANDER="$COMMANDER_DIR/commander"
+fi
+
+# find would end the script under set -e if the directory is not there, before
+# the message below could explain why.
+if [ -z "${IMAGE:-}" ]; then
+    if [ ! -d "$BUILD_DIR" ]; then
+        echo "No build directory at $BUILD_DIR - run build.sh first." >&2
+        exit 1
+    fi
+    IMAGE="$(find "$BUILD_DIR" -name '*.hex' | head -1)"
+fi
+if [ -z "$IMAGE" ]; then
+    echo "No .hex found under $BUILD_DIR - run build.sh first." >&2
+    exit 1
+fi
+
+echo "== device =="
+"$COMMANDER" device info
+
+echo
+echo "== flashing $IMAGE =="
+"$COMMANDER" flash "$IMAGE"
+
+echo
+echo "== reset =="
+"$COMMANDER" device reset
diff --git a/embedded/efr32xg25/tls13_test.c b/embedded/efr32xg25/tls13_test.c
new file mode 100644
index 000000000..590bfe040
--- /dev/null
+++ b/embedded/efr32xg25/tls13_test.c
@@ -0,0 +1,305 @@
+/* tls13_test.c
+ *
+ * Copyright (C) 2006-2026 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+/* TLS 1.3 handshake and record layer over an in-memory transport, run on the
+ * device with every crypto operation routed to the Secure Element.
+ *
+ * The wolfCrypt test proves the callbacks against known answer vectors one call
+ * at a time; this drives them the way a connection does - ECDHE key share,
+ * ECDSA certificate and CertificateVerify, the HKDF key schedule and a running
+ * transcript hash, then application data through the record layer.
+ *
+ * That catches what the vector tests cannot. Handshake and record buffers are
+ * cursors into a larger buffer, so they land on arbitrary offsets rather than
+ * aligned stack arrays - if an engine needs alignment or a DMA-reachable
+ * buffer, it shows here. One cipher object is also reused across thousands of
+ * chained records, so state the port fails to carry between calls fails rather
+ * than passing by luck on a single shot.
+ *
+ * Client and server both run in one thread, wired through two byte queues.
+ * Modeled on examples/tls13/tls13_memio.c, with the file-based certificates
+ * replaced by the compiled-in test buffers and the SE devId on both ends.
+ */
+
+#include <wolfssl/wolfcrypt/settings.h>
+
+#ifdef WOLFSSL_XG25_TLS13
+
+#include <stdio.h>
+
+#include <wolfssl/ssl.h>
+#include <wolfssl/certs_test.h>
+#include <wolfssl/wolfcrypt/error-crypt.h>
+#include <wolfssl/wolfcrypt/port/silabs/silabs_settings.h>
+
+/* Holds one handshake flight. The server's is the larger: certificate,
+ * CertificateVerify and Finished together stay under 2 KB with a P-256
+ * chain. */
+#define XG25_TLS_BUF_SZ 4096
+
+/* Handshake needs a few round trips; the cap only stops a stalled loop. */
+#define XG25_TLS_MAX_ITERS 32
+
+typedef struct membuf {
+    unsigned char data[XG25_TLS_BUF_SZ];
+    int len;
+} membuf;
+
+static int mem_recv(WOLFSSL* ssl, char* buf, int sz, void* ctx)
+{
+    membuf* mb = (membuf*)ctx;
+    int n;
+
+    (void)ssl;
+    if (mb->len == 0) {
+        return WOLFSSL_CBIO_ERR_WANT_READ;
+    }
+    n = (sz < mb->len) ? sz : mb->len;
+    XMEMCPY(buf, mb->data, (size_t)n);
+    XMEMMOVE(mb->data, mb->data + n, (size_t)(mb->len - n));
+    mb->len -= n;
+    return n;
+}
+
+static int mem_send(WOLFSSL* ssl, char* buf, int sz, void* ctx)
+{
+    membuf* mb = (membuf*)ctx;
+
+    (void)ssl;
+    /* A write larger than the queue itself never fits, however much the peer
+     * drains, so fail it outright. Retrying to the iteration cap would report
+     * it as a stalled handshake instead. */
+    if (sz < 0 || sz > XG25_TLS_BUF_SZ) {
+        return WOLFSSL_CBIO_ERR_GENERAL;
+    }
+    if (mb->len > XG25_TLS_BUF_SZ - sz) {
+        return WOLFSSL_CBIO_ERR_WANT_WRITE;
+    }
+    XMEMCPY(mb->data + mb->len, buf, (size_t)sz);
+    mb->len += sz;
+    return sz;
+}
+
+/* Application data round trip at deliberately awkward lengths and offsets.
+ * Every record is sealed and opened by the SE and read back byte for byte, so
+ * a record layer that corrupts data fails here even after a good handshake. */
+static int xg25_tls13_echo(WOLFSSL* c, WOLFSSL* s, int payloadSz, int offset)
+{
+    static unsigned char out[512];
+    static unsigned char in[512];
+    int i;
+    int ret;
+
+    if (offset + payloadSz > (int)sizeof(out)) {
+        return BAD_FUNC_ARG;
+    }
+
+    for (i = 0; i < payloadSz; i++) {
+        out[offset + i] = (unsigned char)(i * 7 + payloadSz);
+    }
+
+    ret = wolfSSL_write(c, out + offset, payloadSz);
+    if (ret != payloadSz) {
+        printf("  write failed: %d (err %d)\n", ret, wolfSSL_get_error(c, ret));
+        return -1;
+    }
+
+    XMEMSET(in, 0, sizeof(in));
+    ret = wolfSSL_read(s, in + offset, payloadSz);
+    if (ret != payloadSz) {
+        printf("  read failed: %d (err %d)\n", ret, wolfSSL_get_error(s, ret));
+        return -1;
+    }
+
+    if (XMEMCMP(out + offset, in + offset, (size_t)payloadSz) != 0) {
+        printf("  payload mismatch at %d bytes, offset %d\n",
+            payloadSz, offset);
+        return -1;
+    }
+
+    return 0;
+}
+
+static int xg25_tls13_one(const char* suite)
+{
+    /* Static rather than automatic: two 4 KB queues plus the peer objects
+     * would otherwise sit on a small-stack build's stack. */
+    static membuf c2s;  /* client writes, server reads */
+    static membuf s2c;  /* server writes, client reads */
+    /* Odd lengths and offsets on purpose: unaligned starts and partial final
+     * blocks are what an engine with an alignment or block assumption trips
+     * over. */
+    static const int sizes[]   = { 1, 15, 16, 17, 31, 63, 127, 128, 255 };
+    static const int offsets[] = { 0,  1,  2,  3,  1,  2,   3,   1,   2 };
+    WOLFSSL_CTX* cctx = NULL;
+    WOLFSSL_CTX* sctx = NULL;
+    WOLFSSL* c = NULL;
+    WOLFSSL* s = NULL;
+    int cdone = 0, sdone = 0;
+    int cret = WOLFSSL_FATAL_ERROR;
+    int sret = WOLFSSL_FATAL_ERROR;
+    int ret = -1;
+    int i;
+
+    XMEMSET(&c2s, 0, sizeof(c2s));
+    XMEMSET(&s2c, 0, sizeof(s2c));
+
+    cctx = wolfSSL_CTX_new(wolfTLSv1_3_client_method());
+    sctx = wolfSSL_CTX_new(wolfTLSv1_3_server_method());
+    if (cctx == NULL || sctx == NULL) {
+        printf("  CTX_new failed\n");
+        goto done;
+    }
+
+    /* A single-suite list means a completed handshake proves that suite was
+     * the one used. */
+    if (wolfSSL_CTX_set_cipher_list(cctx, suite) != WOLFSSL_SUCCESS ||
+        wolfSSL_CTX_set_cipher_list(sctx, suite) != WOLFSSL_SUCCESS) {
+        printf("  %s: not built in, skipped\n", suite);
+        ret = 0;
+        goto done;
+    }
+
+    /* The whole point: every private key operation, key schedule step,
+     * transcript hash and record seal below goes to the Secure Element. */
+    if (wolfSSL_CTX_SetDevId(cctx, WOLFSSL_SILABS_DEVID) != WOLFSSL_SUCCESS ||
+        wolfSSL_CTX_SetDevId(sctx, WOLFSSL_SILABS_DEVID) != WOLFSSL_SUCCESS) {
+        printf("  CTX_SetDevId failed\n");
+        goto done;
+    }
+
+    /* P-256 server certificate and its issuing CA, from the compiled-in test
+     * buffers. Test credentials only - never ship these. */
+    if (wolfSSL_CTX_use_certificate_buffer(sctx, serv_ecc_der_256,
+            (long)sizeof_serv_ecc_der_256, WOLFSSL_FILETYPE_ASN1)
+                != WOLFSSL_SUCCESS) {
+        printf("  server cert load failed\n");
+        goto done;
+    }
+    if (wolfSSL_CTX_use_PrivateKey_buffer(sctx, ecc_key_der_256,
+            (long)sizeof_ecc_key_der_256, WOLFSSL_FILETYPE_ASN1)
+                != WOLFSSL_SUCCESS) {
+        printf("  server key load failed\n");
+        goto done;
+    }
+    ret = wolfSSL_CTX_load_verify_buffer(cctx, ca_ecc_cert_der_256,
+            (long)sizeof_ca_ecc_cert_der_256, WOLFSSL_FILETYPE_ASN1);
+    if (ret != WOLFSSL_SUCCESS) {
+        printf("  CA load failed: %d\n", ret);
+        ret = -1;
+        goto done;
+    }
+    ret = -1;
+
+    /* Peer verification stays on: the client must actually validate the
+     * server's chain, which drives ECDSA verify through the SE. */
+    wolfSSL_CTX_set_verify(cctx, WOLFSSL_VERIFY_PEER, NULL);
+
+    wolfSSL_CTX_SetIORecv(cctx, mem_recv);
+    wolfSSL_CTX_SetIOSend(cctx, mem_send);
+    wolfSSL_CTX_SetIORecv(sctx, mem_recv);
+    wolfSSL_CTX_SetIOSend(sctx, mem_send);
+
+    c = wolfSSL_new(cctx);
+    s = wolfSSL_new(sctx);
+    if (c == NULL || s == NULL) {
+        printf("  SSL_new failed\n");
+        goto done;
+    }
+
+    wolfSSL_SetIOReadCtx(c, &s2c);
+    wolfSSL_SetIOWriteCtx(c, &c2s);
+    wolfSSL_SetIOReadCtx(s, &c2s);
+    wolfSSL_SetIOWriteCtx(s, &s2c);
+
+    for (i = 0; i < XG25_TLS_MAX_ITERS && !(cdone && sdone); i++) {
+        if (!cdone) {
+            cret = wolfSSL_connect(c);
+            if (cret == WOLFSSL_SUCCESS) {
+                cdone = 1;
+            }
+        }
+        if (!sdone) {
+            sret = wolfSSL_accept(s);
+            if (sret == WOLFSSL_SUCCESS) {
+                sdone = 1;
+            }
+        }
+    }
+
+    if (!cdone || !sdone) {
+        printf("  handshake FAILED (client err %d, server err %d)\n",
+            wolfSSL_get_error(c, cret), wolfSSL_get_error(s, sret));
+        goto done;
+    }
+    if (XSTRCMP(wolfSSL_get_version(c), "TLSv1.3") != 0) {
+        printf("  negotiated %s, expected TLSv1.3\n", wolfSSL_get_version(c));
+        goto done;
+    }
+
+    printf("  handshake OK: %s %s\n",
+        wolfSSL_get_version(c), wolfSSL_get_cipher(c));
+
+    for (i = 0; i < (int)(sizeof(sizes) / sizeof(sizes[0])); i++) {
+        if (xg25_tls13_echo(c, s, sizes[i], offsets[i]) != 0) {
+            goto done;
+        }
+    }
+    printf("  record layer OK: %d payloads, 1 to %d bytes\n",
+        (int)(sizeof(sizes) / sizeof(sizes[0])),
+        sizes[(sizeof(sizes) / sizeof(sizes[0])) - 1]);
+
+    ret = 0;
+
+done:
+    wolfSSL_free(c);
+    wolfSSL_free(s);
+    wolfSSL_CTX_free(cctx);
+    wolfSSL_CTX_free(sctx);
+    return ret;
+}
+
+int xg25_tls13_test(void)
+{
+    /* Three suites, exercising different engines. SHA-256 drives the key
+     * schedule and transcript hash through the SE, SHA-384 runs them in
+     * software, and the ChaCha suite covers a record cipher the AES suites
+     * never reach. */
+    static const char* suites[] = {
+        "TLS13-AES128-GCM-SHA256",
+        "TLS13-AES256-GCM-SHA384",
+        "TLS13-CHACHA20-POLY1305-SHA256"
+    };
+    int i;
+    int ret;
+
+    for (i = 0; i < (int)(sizeof(suites) / sizeof(suites[0])); i++) {
+        printf("  [%s]\n", suites[i]);
+        ret = xg25_tls13_one(suites[i]);
+        if (ret != 0) {
+            return ret;
+        }
+    }
+
+    return 0;
+}
+
+#endif /* WOLFSSL_XG25_TLS13 */
diff --git a/embedded/efr32xg25/user_settings.h b/embedded/efr32xg25/user_settings.h
new file mode 100644
index 000000000..37609085d
--- /dev/null
+++ b/embedded/efr32xg25/user_settings.h
@@ -0,0 +1,162 @@
+/* user_settings.h
+ *
+ * Copyright (C) 2006-2026 wolfSSL Inc.
+ *
+ * This file is part of wolfSSL.
+ *
+ * wolfSSL is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * wolfSSL is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1335, USA
+ */
+
+/* wolfCrypt configuration for the EFR32xG25 Secure Element crypto callback
+ * port. Used by both the library and the application, as required. */
+
+#ifndef WOLFSSL_XG25_USER_SETTINGS_H
+#define WOLFSSL_XG25_USER_SETTINGS_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* ---- Silicon Labs Secure Element -------------------------------------- */
+/* Routes operations through the crypto callback framework by devId. This one
+ * define also turns on WOLF_CRYPTO_CB, registers the device from
+ * wolfCrypt_Init() and points WC_USE_DEVID at it, so the stock wolfCrypt test
+ * and benchmark exercise the hardware. */
+#define WOLFSSL_SILABS_CRYPTOCB
+
+/* Optional: TLS 1.3 handshake and record layer test. Adds a full handshake and
+ * application data exchange, both peers on the device, everything routed to
+ * the Secure Element - buffers at arbitrary offsets and one cipher object
+ * reused across many records, which is where alignment or carried-state
+ * problems show up. See tls13_test.c.
+ *
+ * Turning this on links the TLS sources, which are already in the project and
+ * compile to nothing while it is off.
+ */
+#if 0
+    #define WOLFSSL_XG25_TLS13
+#endif
+
+/* ---- Platform ---------------------------------------------------------- */
+#ifdef WOLFSSL_XG25_TLS13
+    #define WOLFSSL_TLS13
+    #define WOLFSSL_NO_TLS12
+    #define HAVE_TLS_EXTENSIONS
+    #define HAVE_SUPPORTED_CURVES
+    #define WOLFSSL_USER_IO
+    #define NO_DH
+    /* RSA stays compiled in for the wolfCrypt test vectors, and TLS 1.3
+     * requires PSS for any RSA signature. */
+    #define WC_RSA_PSS
+#else
+    /* This project exercises wolfCrypt only; no TLS is linked. */
+    #define WOLFCRYPT_ONLY
+#endif
+#define NO_OLD_TLS
+#define WOLFSSL_GENERAL_ALIGNMENT 4
+/* newlib-nano has no strcasecmp/strncasecmp; use wolfCrypt's own. */
+#define USE_WOLF_STRCASECMP
+#define USE_WOLF_STRNCASECMP
+#define SINGLE_THREADED
+#define NO_FILESYSTEM
+#define NO_WRITEV
+#define WOLFSSL_NO_SOCK
+#define NO_MAIN_DRIVER
+#define BENCH_EMBEDDED
+#define WOLFSSL_SMALL_STACK
+#define WOLFSSL_USER_CURRTIME
+#define USE_CERT_BUFFERS_256
+
+/* Optional: Thumb2 assembly for the symmetric and hash software paths. The SE
+ * handles these algorithms, so this only changes what the software fallback
+ * costs - and what the benchmark's SW column reports. The thumb2-*-asm_c.c
+ * sources are already in the project and compile to nothing while it is off.
+ *
+ * WOLFSSL_ARM_ARCH=7 selects the ARMv7-M/Thumb2 encodings the Cortex-M33 runs;
+ * WOLFSSL_ARMASM_NO_HW_CRYPTO is required because the M33 has no ARMv8
+ * cryptography extensions and no NEON.
+ */
+#if 0
+    #define WOLFSSL_ARMASM
+    #define WOLFSSL_ARMASM_THUMB2
+    #define WOLFSSL_ARMASM_INLINE
+    #define WOLFSSL_ARMASM_NO_HW_CRYPTO
+    #define WOLFSSL_ARMASM_NO_NEON
+    #define WOLFSSL_ARM_ARCH 7
+#endif
+
+/* ---- Hardening ---------------------------------------------------------
+ * What ./configure --enable-harden turns on, and its default for good reason:
+ * timing-attack resistance on the paths handling private keys, at some
+ * software cost. The SE is unaffected, but anything it declines falls back to
+ * these software implementations.
+ *
+ * TFM_TIMING_RESISTANT applies only to the fastmath backend, which this
+ * configuration does not use (see WOLFSSL_SP_MATH_ALL below), but is set so
+ * the setting survives a change of math backend.
+ */
+#define ECC_TIMING_RESISTANT
+#define WC_RSA_BLINDING
+#define TFM_TIMING_RESISTANT
+
+/* Cortex-M33 single precision assembly for the software fallback paths. */
+#define WOLFSSL_SP_MATH_ALL
+#define WOLFSSL_HAVE_SP_RSA
+#define WOLFSSL_HAVE_SP_ECC
+#define WOLFSSL_SP_ARM_CORTEX_M_ASM
+#define WOLFSSL_SP_SMALL
+
+/* ---- Algorithms offloaded to the SE ------------------------------------ */
+#define HAVE_AES_ECB
+#define WOLFSSL_AES_DIRECT
+#define WOLFSSL_AES_COUNTER
+#define HAVE_AESGCM
+#define HAVE_AESCCM
+#define WOLFSSL_AES_192
+#define WOLFSSL_AES_256
+#define WOLFSSL_CMAC
+#define WOLFSSL_SHA224
+#define WOLFSSL_SHA384
+#define WOLFSSL_SHA512
+#define HAVE_HKDF
+#define HAVE_PBKDF2
+#define HAVE_CHACHA
+#define HAVE_POLY1305
+#define HAVE_ECC
+#define ECC_SHAMIR
+#define HAVE_ECC384
+#define HAVE_ECC521
+#define ALT_ECC_SIZE
+
+/* ---- Trimmed away to fit and to keep the run short --------------------- */
+#define NO_DSA
+#define NO_DES3
+#define NO_RC4
+#define NO_MD4
+#define NO_MD5
+#define NO_PSK
+#define NO_PWDBASED_TEST_LONG
+#define WOLFSSL_NO_SHAKE128
+#define WOLFSSL_NO_SHAKE256
+
+/* The Series 2 High Security Engine has no RSA hardware. RSA stays in
+ * software; leave it on for the test vectors but keep the key size modest. */
+#define RSA_MAX_SIZE 2048
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* WOLFSSL_XG25_USER_SETTINGS_H */
diff --git a/embedded/efr32xg25/wolfcrypt_test.slcp b/embedded/efr32xg25/wolfcrypt_test.slcp
new file mode 100644
index 000000000..54dcdd3c1
--- /dev/null
+++ b/embedded/efr32xg25/wolfcrypt_test.slcp
@@ -0,0 +1,189 @@
+project_name: wolfcrypt_test
+package: platform
+quality: experimental
+label: wolfSSL - wolfCrypt test and benchmark (EFR32xG25)
+description: >
+  Runs the wolfCrypt algorithm self-test and benchmark on an EFR32xG25, with
+  crypto routed to the Secure Element through the wolfSSL crypto callback port
+  (WOLFSSL_SILABS_CRYPTOCB). Output goes to the kit VCOM.
+category: Example|Platform
+filter:
+  - name: "Device Type"
+    value: ["SoC"]
+  - name: "MCU"
+    value: ["32-bit MCU"]
+  - name: "Project Difficulty"
+    value: ["Advanced"]
+source:
+  - path: app.c
+  - path: ../../../wolfssl/wolfcrypt/src/aes.c
+  - path: ../../../wolfssl/wolfcrypt/src/arc4.c
+  - path: ../../../wolfssl/wolfcrypt/src/ascon.c
+  - path: ../../../wolfssl/wolfcrypt/src/asn.c
+  - path: ../../../wolfssl/wolfcrypt/src/async.c
+  - path: ../../../wolfssl/wolfcrypt/src/blake2b.c
+  - path: ../../../wolfssl/wolfcrypt/src/blake2s.c
+  - path: ../../../wolfssl/wolfcrypt/src/camellia.c
+  - path: ../../../wolfssl/wolfcrypt/src/chacha.c
+  - path: ../../../wolfssl/wolfcrypt/src/chacha20_poly1305.c
+  - path: ../../../wolfssl/wolfcrypt/src/cmac.c
+  - path: ../../../wolfssl/wolfcrypt/src/coding.c
+  - path: ../../../wolfssl/wolfcrypt/src/compress.c
+  - path: ../../../wolfssl/wolfcrypt/src/cpuid.c
+  - path: ../../../wolfssl/wolfcrypt/src/cryptocb.c
+  - path: ../../../wolfssl/wolfcrypt/src/curve25519.c
+  - path: ../../../wolfssl/wolfcrypt/src/curve448.c
+  - path: ../../../wolfssl/wolfcrypt/src/des3.c
+  - path: ../../../wolfssl/wolfcrypt/src/dh.c
+  - path: ../../../wolfssl/wolfcrypt/src/dsa.c
+  - path: ../../../wolfssl/wolfcrypt/src/ecc.c
+  - path: ../../../wolfssl/wolfcrypt/src/eccsi.c
+  - path: ../../../wolfssl/wolfcrypt/src/ed25519.c
+  - path: ../../../wolfssl/wolfcrypt/src/ed448.c
+  - path: ../../../wolfssl/wolfcrypt/src/error.c
+  - path: ../../../wolfssl/wolfcrypt/src/falcon.c
+  - path: ../../../wolfssl/wolfcrypt/src/fe_448.c
+  - path: ../../../wolfssl/wolfcrypt/src/fe_low_mem.c
+  - path: ../../../wolfssl/wolfcrypt/src/fe_operations.c
+  - path: ../../../wolfssl/wolfcrypt/src/fips.c
+  - path: ../../../wolfssl/wolfcrypt/src/fips_test.c
+  - path: ../../../wolfssl/wolfcrypt/src/ge_448.c
+  - path: ../../../wolfssl/wolfcrypt/src/ge_low_mem.c
+  - path: ../../../wolfssl/wolfcrypt/src/ge_operations.c
+  - path: ../../../wolfssl/wolfcrypt/src/hash.c
+  - path: ../../../wolfssl/wolfcrypt/src/hmac.c
+  - path: ../../../wolfssl/wolfcrypt/src/hpke.c
+  - path: ../../../wolfssl/wolfcrypt/src/integer.c
+  - path: ../../../wolfssl/wolfcrypt/src/kdf.c
+  - path: ../../../wolfssl/wolfcrypt/src/logging.c
+  - path: ../../../wolfssl/wolfcrypt/src/md2.c
+  - path: ../../../wolfssl/wolfcrypt/src/md4.c
+  - path: ../../../wolfssl/wolfcrypt/src/md5.c
+  - path: ../../../wolfssl/wolfcrypt/src/memory.c
+  - path: ../../../wolfssl/wolfcrypt/src/pkcs12.c
+  - path: ../../../wolfssl/wolfcrypt/src/pkcs7.c
+  - path: ../../../wolfssl/wolfcrypt/src/poly1305.c
+  - path: ../../../wolfssl/wolfcrypt/src/puf.c
+  - path: ../../../wolfssl/wolfcrypt/src/pwdbased.c
+  - path: ../../../wolfssl/wolfcrypt/src/random.c
+  - path: ../../../wolfssl/wolfcrypt/src/rc2.c
+  - path: ../../../wolfssl/wolfcrypt/src/ripemd.c
+  - path: ../../../wolfssl/wolfcrypt/src/rng_bank.c
+  - path: ../../../wolfssl/wolfcrypt/src/rsa.c
+  - path: ../../../wolfssl/wolfcrypt/src/sakke.c
+  - path: ../../../wolfssl/wolfcrypt/src/selftest.c
+  - path: ../../../wolfssl/wolfcrypt/src/sha.c
+  - path: ../../../wolfssl/wolfcrypt/src/sha256.c
+  - path: ../../../wolfssl/wolfcrypt/src/sha3.c
+  - path: ../../../wolfssl/wolfcrypt/src/sha512.c
+  - path: ../../../wolfssl/wolfcrypt/src/signature.c
+  - path: ../../../wolfssl/wolfcrypt/src/siphash.c
+  - path: ../../../wolfssl/wolfcrypt/src/sm2.c
+  - path: ../../../wolfssl/wolfcrypt/src/sm3.c
+  - path: ../../../wolfssl/wolfcrypt/src/sm4.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_arm32.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_arm64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_armthumb.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_c32.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_c64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_cortexm.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_int.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_riscv64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_arm32.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_arm64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_armthumb.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_c32.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_c64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_cortexm.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_riscv64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_sm2_x86_64.c
+  - path: ../../../wolfssl/wolfcrypt/src/sp_x86_64.c
+  - path: ../../../wolfssl/wolfcrypt/src/srp.c
+  - path: ../../../wolfssl/wolfcrypt/src/tfm.c
+  - path: ../../../wolfssl/wolfcrypt/src/tsp.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_encrypt.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_frodokem.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_frodokem_mat.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_lms.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_lms_impl.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_mldsa.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_mlkem.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_mlkem_poly.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_pkcs11.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_port.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_she.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_slhdsa.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_xmss.c
+  - path: ../../../wolfssl/wolfcrypt/src/wc_xmss_impl.c
+  - path: ../../../wolfssl/wolfcrypt/src/wolfcrypt_first.c
+  - path: ../../../wolfssl/wolfcrypt/src/wolfcrypt_last.c
+  - path: ../../../wolfssl/wolfcrypt/src/wolfentropy.c
+  - path: ../../../wolfssl/wolfcrypt/src/wolfevent.c
+  - path: ../../../wolfssl/wolfcrypt/src/wolfmath.c
+  - path: ../../../wolfssl/src/internal.c
+  - path: ../../../wolfssl/src/keys.c
+  - path: ../../../wolfssl/src/ssl.c
+  - path: ../../../wolfssl/src/tls.c
+  - path: ../../../wolfssl/src/tls13.c
+  - path: ../../../wolfssl/src/wolfio.c
+  - path: tls13_test.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/arm/thumb2-aes-asm_c.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/arm/thumb2-sha256-asm_c.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/arm/thumb2-sha512-asm_c.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/arm/thumb2-chacha-asm_c.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/arm/thumb2-poly1305-asm_c.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_aes.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cb_cipher.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cb_cmac.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cb_hash.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cb_kdf.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cb_pk.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cb_rng.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_cryptocb.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_ecc.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_hash.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_key.c
+  - path: ../../../wolfssl/wolfcrypt/src/port/silabs/silabs_random.c
+  - path: ../../../wolfssl/wolfcrypt/test/test.c
+  - path: ../../../wolfssl/wolfcrypt/benchmark/benchmark.c
+include:
+  - path: .
+    file_list:
+      - path: user_settings.h
+  - path: ../../../wolfssl
+    file_list:
+      - path: wolfssl/wolfcrypt/settings.h
+readme:
+  - path: README.md
+component:
+  - id: se_manager
+  - id: sl_main
+  - id: device_init
+  - id: clock_manager
+  - id: printf
+  - id: iostream_retarget_stdio
+  - id: iostream_recommended_stream
+  - id: sleeptimer
+  - id: sl_string
+  - id: status_string
+requires:
+  - name: device_has_semailbox
+configuration:
+  - name: SL_STATUS_STRING_ENABLE_BLUETOOTH
+    value: 0
+  - name: SL_STATUS_STRING_ENABLE_WIFI
+    value: 0
+  - name: SL_BOARD_ENABLE_VCOM
+    value: 1
+  # wolfcrypt_test exercises deep call chains (ECC, RSA, ASN.1). The part has
+  # 512 KB of RAM and the app uses about 2 KB of static data, so spend some of it
+  # on stack rather than risk an overflow mid-test.
+  - name: SL_STACK_SIZE
+    value: 32768
+  - name: SL_IOSTREAM_USART_VCOM_FLOW_CONTROL_TYPE
+    value: usartHwFlowControlNone
+define:
+  - name: WOLFSSL_USER_SETTINGS
+toolchain_settings:
+  - option: optimize
+    value: speed