diff --git a/.github/workflows/lint-format-checker.yml b/.github/workflows/lint-format-checker.yml
index add737c..8f7b699 100644
--- a/.github/workflows/lint-format-checker.yml
+++ b/.github/workflows/lint-format-checker.yml
@@ -1,5 +1,5 @@
 name: Bash Lint & Format Check
-
+run-name: ${{ github.actor }} is running ${{ github.workflow }} 
 on:
   push:
     branches: [main]
diff --git a/.shellcheckrc b/.shellcheckrc
new file mode 100644
index 0000000..b11d014
--- /dev/null
+++ b/.shellcheckrc
@@ -0,0 +1,4 @@
+# .shellcheckrc
+disable=SC1091
+disable=SC1090
+disable=SC2034
\ No newline at end of file
diff --git a/bash/bashrc b/bash/bashrc
index 32cda0a..ce9d73e 100644
--- a/bash/bashrc
+++ b/bash/bashrc
@@ -6,8 +6,8 @@
 
 # If not running interactively, don't do anything
 case $- in
-    *i*) ;;
-      *) return;;
+  *i*) ;;
+  *) return ;;
 esac
 
 # don't put duplicate lines or lines starting with space in the history.
@@ -34,12 +34,12 @@ shopt -s checkwinsize
 
 # set variable identifying the chroot you work in (used in the prompt below)
 if [ -z "${debian_chroot:-}" ] && [ -r /etc/debian_chroot ]; then
-    debian_chroot=$(cat /etc/debian_chroot)
+  debian_chroot=$(cat /etc/debian_chroot)
 fi
 
 # set a fancy prompt (non-color, unless we know we "want" color)
 case "$TERM" in
-    xterm-color) color_prompt=yes;;
+  xterm-color) color_prompt=yes ;;
 esac
 
 # uncomment for a colored prompt, if the terminal has the capability; turned
@@ -48,42 +48,46 @@ esac
 force_color_prompt=yes
 
 if [ -n "$force_color_prompt" ]; then
-    if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
-	# We have color support; assume it's compliant with Ecma-48
-	# (ISO/IEC-6429). (Lack of such support is extremely rare, and such
-	# a case would tend to support setf rather than setaf.)
-	color_prompt=yes
-    else
-	color_prompt=
-    fi
+  if [ -x /usr/bin/tput ] && tput setaf 1 >&/dev/null; then
+    # We have color support; assume it's compliant with Ecma-48
+    # (ISO/IEC-6429). (Lack of such support is extremely rare, and such
+    # a case would tend to support setf rather than setaf.)
+    color_prompt=yes
+  else
+    color_prompt=
+  fi
 fi
 
 if [ "$color_prompt" = yes ]; then
-    PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
+  PS1='${debian_chroot:+($debian_chroot)}\[\033[01;32m\]\u@\h\[\033[00m\]:\[\033[01;34m\]\w\[\033[00m\]\$ '
 else
-    PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
+  PS1='${debian_chroot:+($debian_chroot)}\u@\h:\w\$ '
 fi
 unset color_prompt force_color_prompt
 
 # If this is an xterm set the title to user@host:dir
 case "$TERM" in
-xterm*|rxvt*)
+  xterm* | rxvt*)
     PS1="\[\e]0;${debian_chroot:+($debian_chroot)}\u@\h: \w\a\]$PS1"
     ;;
-*)
-    ;;
+  *) ;;
 esac
 
 # enable color support of ls and also add handy aliases
 if [ -x /usr/bin/dircolors ]; then
-    test -r ~/.dircolors && eval "$(dircolors -b ~/.dircolors)" || eval "$(dircolors -b)"
-    alias ls='ls --color=auto'
-    #alias dir='dir --color=auto'
-    #alias vdir='vdir --color=auto'
-
-    alias grep='grep --color=auto'
-    alias fgrep='fgrep --color=auto'
-    alias egrep='egrep --color=auto'
+  if [ -r ~/.dircolors ]; then
+    eval "$(dircolors -b ~/.dircolors)" |
+      else
+    eval "$(dircolors -b)"
+  fi
+
+  alias ls='ls --color=auto'
+  #alias dir='dir --color=auto'
+  #alias vdir='vdir --color=auto'
+
+  alias grep='grep --color=auto'
+  alias fgrep='fgrep --color=auto'
+  alias egrep='egrep --color=auto'
 fi
 
 # colored GCC warnings and errors
@@ -104,7 +108,7 @@ alias alert='notify-send --urgency=low -i "$([ $? = 0 ] && echo terminal || echo
 # See /usr/share/doc/bash-doc/examples in the bash-doc package.
 
 if [ -f ~/.bash_aliases ]; then
-    . ~/.bash_aliases
+  source ~/.bash_aliases
 fi
 
 # enable programmable completion features (you don't need to enable
@@ -112,8 +116,8 @@ fi
 # sources /etc/bash.bashrc).
 if ! shopt -oq posix; then
   if [ -f /usr/share/bash-completion/bash_completion ]; then
-    . /usr/share/bash-completion/bash_completion
+    source /usr/share/bash-completion/bash_completion
   elif [ -f /etc/bash_completion ]; then
-    . /etc/bash_completion
+    source /etc/bash_completion
   fi
 fi
diff --git a/bash/profile b/bash/profile
index c86e7d8..5aefc2e 100644
--- a/bash/profile
+++ b/bash/profile
@@ -9,44 +9,44 @@
 #umask 022
 # if running bash
 if [ -n "$BASH_VERSION" ]; then
-    # include .bashrc if it exists
-    if [ -f "$HOME/.bashrc" ]; then
-	. "$HOME/.bashrc"
-    fi
+  # include .bashrc if it exists
+  if [ -f "$HOME/.bashrc" ]; then
+    . "$HOME/.bashrc"
+  fi
 fi
 
 # set PATH so it includes user's private bin if it exists
-if [ -d "$HOME/bin" ] ; then
-    PATH="$HOME/bin:$PATH"
+if [ -d "$HOME/bin" ]; then
+  PATH="$HOME/bin:$PATH"
 fi
 
 # set PATH so it includes user's private .local bin if it exists
-if [ -d "$HOME/.local/bin" ] ; then
-    PATH="$HOME/.local/bin:$PATH"
+if [ -d "$HOME/.local/bin" ]; then
+  PATH="$HOME/.local/bin:$PATH"
 fi
 
 # load Work profile
-if [ -d "/mnt/c/Users" ] ; then
-    echo 'I am at work'
-    source "$HOME/.work-profile"
+if [ -d "/mnt/c/Users" ]; then
+  echo 'I am at work'
+  source "$HOME/.work-profile"
 else
-    echo 'I am not at work!'
+  echo 'I am not at work!'
 fi
 
 # Make cat == batcat (pretty cat)
 # relies on batcat being installed (Ubuntu)
 # Save the original system `cat` under `rcat`
-alias rcat="$(which cat)"
+alias rcat='$(which cat)'
 # For Ubuntu and Debian-based `bat` packages
 # the `bat` program is named `batcat` on these systems
-alias cat="$(which batcat)"
+alias cat='$(which batcat)'
 export MANPAGER="sh -c 'col -bx | batcat -l man -p'"
 export MANROFFOPT="-c"
 
 # alias for fd
 alias fd=fdfind
 
-alias mk="$(which minikube)"
+alias mk='$(which minikube)'
 
 # Docker alias
 alias docker-stop='docker stop "$(docker ps -q)"'
@@ -63,4 +63,4 @@ export GIT_EDITOR=vim
 export GREP_OPTIONS='--color=auto' GREP_COLOR='mt=1;32'
 
 # set up eza aliases
-source ~/dotfiles/eza/eza-config
\ No newline at end of file
+source ~/dotfiles/eza/eza-config
diff --git a/bash/work-profile b/bash/work-profile
index b755785..777c66b 100644
--- a/bash/work-profile
+++ b/bash/work-profile
@@ -1,4 +1,3 @@
-
 #!/bin/bash
 
 # Java related bits
@@ -7,7 +6,6 @@ export JAVA_11=/usr/lib/jvm/java-11-openjdk-amd64
 export JAVA_17=/usr/lib/jvm/java-17-openjdk-amd64
 export JAVA_21=/usr/lib/jvm/java-21-openjdk-amd64
 
-
 export JAVA_HOME=$JAVA_21
 export STUDIO_JDK=$JAVA_21
 export JDK_HOME=$JAVA_21
@@ -44,12 +42,12 @@ alias fbs='cd $FBS'
 # Docker clean dangling images <none>:<none>
 # from https://projectatomic.io/blog/2015/07/what-are-docker-none-none-images/
 function docker-clean() {
-	docker rmi $(docker images -f "dangling=true" -q)
+  docker rmi "$(docker images -f "dangling=true" -q)"
 }
 
 # Stop all running containers
 function docker-stop-all() {
-	docker stop $(docker ps -q)
+  docker stop "$(docker ps -q)"
 }
 
 alias dsa='docker-stop-all'
@@ -74,15 +72,15 @@ export KUBECONFIG_INFRA="$HOME/.kubecfg/infra/infra-v2.kubeconfig"
 export KUBECONFIG=$KUBECONFIG_DEV
 
 function switch-k8s() {
-    if [ $1 = 'd' ] ; then
-        export KUBECONFIG=$KUBECONFIG_DEV
-        echo "Switch to k8s dev: $KUBECONFIG"
-    elif [ $1 = 'p' ] ; then
-        export KUBECONFIG=$KUBECONFIG_PROD
-        echo "Switch to k8s prod: $KUBECONFIG"
-    else
-        echo "Didn't understand chose, k8s is still $KUBECONFIG"
-    fi
+  if [ "$1" = 'd' ]; then
+    export KUBECONFIG=$KUBECONFIG_DEV
+    echo "Switch to k8s dev: $KUBECONFIG"
+  elif [ "$1" = 'p' ]; then
+    export KUBECONFIG=$KUBECONFIG_PROD
+    echo "Switch to k8s prod: $KUBECONFIG"
+  else
+    echo "Didn't understand chose, k8s is still $KUBECONFIG"
+  fi
 }
 
 alias sk='switch-k8s'
@@ -91,15 +89,16 @@ alias fbs='cd $FBS'
 
 # Just checking
 echo "Loaded shodders work profile"
-echo "Using kubeconf: $KUBECONFIG \n\n"
-
+echo "Using kubeconf: $KUBECONFIG"
 
 # Set some envs to use with docker (bypassing fba-compose)
 export FBA_COMPOSE_DIR=${FBA_COMPOSE_DIR:-/mnt/c/programming/docker-orchestration}
-export WINDOWS_HOST=$(ip route show | grep -i default | awk '{ print $3 }')
+win_host="$(ip route show | grep -i default | awk '{ print $3 }')"
+export WINDOWS_HOST="$win_host"
 export REPOS_ROOT_DIR=${REPOS_ROOT_DIR:-~/repos}
 export WIN_REPOS_ROOT_DIR=${WIN_REPOS_ROOT_DIR:-/mnt/c/programming}
-export WIN_USER_DIR=$(wslpath "$(cmd.exe /c "echo %USERPROFILE%" 2>/dev/null | tr -d '\r')")
+win_home_dir="$(wslpath "$(cmd.exe /c "echo %USERPROFILE%" 2>/dev/null | tr -d '\r')")"
+export WIN_USER_DIR="$win_home_dir"
 
 # shortcut for running docker compose with correct compose/env files
 alias lc='docker compose -f $FBA_COMPOSE_DIR/docker-compose.yml --env-file $FBA_COMPOSE_DIR/.env'
@@ -107,5 +106,5 @@ alias lc='docker compose -f $FBA_COMPOSE_DIR/docker-compose.yml --env-file $FBA_
 # If using NVM for node version management
 # Follow this: https://www.digitalocean.com/community/tutorials/how-to-install-node-js-on-ubuntu-22-04
 export NVM_DIR="$HOME/.nvm"
-[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
-[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion
+[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"                   # This loads nvm
+[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion" # This loads nvm bash_completion
diff --git a/bash/zshenv b/bash/zshenv
index fdf345e..5a600f5 100644
--- a/bash/zshenv
+++ b/bash/zshenv
@@ -1,2 +1,2 @@
 # for ZIM framework to stop loading auto complete twice - see https://github.com/zimfw/zimfw/wiki/Troubleshooting#completion-is-not-working
-skip_global_compinit=1
\ No newline at end of file
+skip_global_compinit=1
diff --git a/bash/zshrc b/bash/zshrc
index c919ed2..8fd812d 100644
--- a/bash/zshrc
+++ b/bash/zshrc
@@ -21,7 +21,7 @@ bindkey -e
 #SPROMPT='zsh: correct %F{red}%R%f to %F{green}%r%f [nyae]? '
 
 # Remove path separator from WORDCHARS.
-WORDCHARS=${WORDCHARS//[\/]}
+WORDCHARS=${WORDCHARS//[\/]/}
 
 # --------------------
 # Module configuration
@@ -64,33 +64,32 @@ ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets)
 # Initialize modules
 # ------------------
 
-ZIM_HOME=${ZDOTDIR:-${HOME}}/.zim
+ZIM_HOME="${ZDOTDIR:-${HOME}}/.zim"
 # Download zimfw plugin manager if missing.
-if [[ ! -e ${ZIM_HOME}/zimfw.zsh ]]; then
-  if (( ${+commands[curl]} )); then
-    curl -fsSL --create-dirs -o ${ZIM_HOME}/zimfw.zsh \
-        https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
+if [[ ! -e "${ZIM_HOME}/zimfw.zsh" ]]; then
+  if command -v curl &>/dev/null; then
+    curl -fsSL --create-dirs -o "${ZIM_HOME}/zimfw.zsh" \
+      https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
   else
-    mkdir -p ${ZIM_HOME} && wget -nv -O ${ZIM_HOME}/zimfw.zsh \
-        https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
+    mkdir -p "${ZIM_HOME}" && wget -nv -O "${ZIM_HOME}/zimfw.zsh" \
+      https://github.com/zimfw/zimfw/releases/latest/download/zimfw.zsh
   fi
 fi
 # Install missing modules, and update ${ZIM_HOME}/init.zsh if missing or outdated.
-if [[ ! ${ZIM_HOME}/init.zsh -nt ${ZIM_CONFIG_FILE:-${ZDOTDIR:-${HOME}}/.zimrc} ]]; then
-  source ${ZIM_HOME}/zimfw.zsh init
+if [[ ! "${ZIM_HOME}/init.zsh" -nt "${ZIM_CONFIG_FILE:-${ZDOTDIR:-${HOME}}/.zimrc}" ]]; then
+  source "${ZIM_HOME}/zimfw.zsh init"
 fi
 # Initialize modules.
-source ${ZIM_HOME}/init.zsh
+source "${ZIM_HOME}/init.zsh"
 # }}} End configuration added by Zim Framework install
 
-
 ## Load my standard profile
 ## Needs to be symlinked `ln -s ~/dotfiles/sh/profile ~/.profile`
-source $HOME/.profile
+source "$HOME/.profile"
 
 # start Starship
 eval "$(starship init zsh)"
 # current Startship prompt is: https://starship.rs/presets/gruvbox-rainbow
 
 # Start Zoxide
-eval "$(zoxide init zsh)"
\ No newline at end of file
+eval "$(zoxide init zsh)"
diff --git a/eza/eza-config b/eza/eza-config
index e7f9568..6dce78e 100644
--- a/eza/eza-config
+++ b/eza/eza-config
@@ -41,4 +41,4 @@ alias tt='eza --tree -L 4 --icons --group-directories-first --header '
 alias eld='eza --icons --group-directories-first --only-dirs --header '
 alias elf='eza --icons --group-directories-first --only-files --header '
 
-####### EZA CONFIG END #######
\ No newline at end of file
+####### EZA CONFIG END #######
diff --git a/init.sh b/init.sh
index e3205a6..12ddeb0 100644
--- a/init.sh
+++ b/init.sh
@@ -8,123 +8,120 @@ POSITIONAL_ARGS=()
 
 while [[ $# -gt 0 ]]; do
   case $1 in
-    -i|--install)
+    -i | --install)
       #echo "Install"
       install=true
       shift # past argument
-      # shift # past value if you want to 
+      # shift # past value if you want to
       ;;
-    -s|--symlink)
+    -s | --symlink)
       #echo "Symlinks only"
       symlinks=true
       shift # past argument
-      # shift # past value if you want to 
+      # shift # past value if you want to
       ;;
-    -*|--*)
+    -*)
       echo "Unknown option $1"
       exit 1
       ;;
-#    *)
-#      POSITIONAL_ARGS+=("$1") # save positional arg
-#      shift # past argument
-#      ;;
+      #    *)
+      #      POSITIONAL_ARGS+=("$1") # save positional arg
+      #      shift # past argument
+      #      ;;
   esac
 done
 
 set -- "${POSITIONAL_ARGS[@]}" # restore positional parameters
 
-
-if [ $install = false ] ; then
-    echo "Not installing..."
+if [ $install = false ]; then
+  echo "Not installing..."
 fi
 
-if [ $symlinks = false ] ; then
-    echo "Not setting up symlinks/config..."
+if [ $symlinks = false ]; then
+  echo "Not setting up symlinks/config..."
 fi
 
 # Install the things if needed
-if [ $install = true ] ; then
-    cd ~
-    # Install Zsh for all (not local user)
-    echo "Installing Zsh..."
-    sudo apt install zsh
-
-    # Set Zsh as default shell. 
-    echo "Setting zsh as default shell..."
-    chsh -s /usr/bin/zsh 
-
-    # Install ZIM https://zimfw.sh/docs/
-    echo "Installing ZIM..."
-    curl -fsSL https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
-    # use my own zimrc
-    rm $HOME/.zimrv
-    ln -s $HOME/dotfiles/bash/zimrc $HOME/.zimrc
-
-    echo "Installing Starship..."
-    curl -sS https://starship.rs/install.sh | sh
-      
-
-    # Install some standard bits
-    echo "Intalling tools..."
-    sudo apt install bat 
-    sudo apt install btop
-    sudo apt install fd-find 
-    sudo apt install ripgrep 
-
-    echo "Installing Lazygit..."
-    LAZYGIT_VERSION=$(curl -s "https://api.github.com/repos/jesseduffield/lazygit/releases/latest" | \grep -Po '"tag_name": *"v\K[^"]*')
-    curl -Lo lazygit.tar.gz "https://github.com/jesseduffield/lazygit/releases/download/v${LAZYGIT_VERSION}/lazygit_${LAZYGIT_VERSION}_Linux_x86_64.tar.gz"
-    tar xf lazygit.tar.gz lazygit
-    sudo install lazygit -D -t /usr/local/bin/
-    rm lazygit*
-
-    # Install zoxide https://github.com/ajeetdsouza/zoxide
-    curl -sSfL https://raw.githubusercontent.com/ajeetdsouza/zoxide/main/install.sh | sh
-
-    # install eza 
-    sudo mkdir -p /etc/apt/keyrings
-    wget -qO- https://raw.githubusercontent.com/eza-community/eza/main/deb.asc | sudo gpg --dearmor -o /etc/apt/keyrings/gierens.gpg
-    echo "deb [signed-by=/etc/apt/keyrings/gierens.gpg] http://deb.gierens.de stable main" | sudo tee /etc/apt/sources.list.d/gierens.list
-    sudo chmod 644 /etc/apt/keyrings/gierens.gpg /etc/apt/sources.list.d/gierens.list
-    sudo apt update
-    sudo apt install -y eza
-
-    # Git will need to have been installed already
-    sudo apt install git-delta
-    git config --global core.pager delta
-    git config --global interactive.diffFilter 'delta --color-only'
-    git config --global delta.navigate true
-    git config --global delta.side-by-side true
-    git config --global merge.conflictStyle zdiff3
-
-    # install Dust
-    curl -sSfL https://raw.githubusercontent.com/bootandy/dust/refs/heads/master/install.sh | sh
+if [ $install = true ]; then
+  cd ~ || exit
+  # Install Zsh for all (not local user)
+  echo "Installing Zsh..."
+  sudo apt install zsh
+
+  # Set Zsh as default shell.
+  echo "Setting zsh as default shell..."
+  chsh -s /usr/bin/zsh
+
+  # Install ZIM https://zimfw.sh/docs/
+  echo "Installing ZIM..."
+  curl -fsSL https://raw.githubusercontent.com/zimfw/install/master/install.zsh | zsh
+  # use my own zimrc
+  rm "$HOME/.zimrv"
+  ln -s "$HOME/dotfiles/bash/zimrc" "$HOME/.zimrc"
+
+  echo "Installing Starship..."
+  curl -sS https://starship.rs/install.sh | sh
+
+  # Install some standard bits
+  echo "Intalling tools..."
+  sudo apt install bat
+  sudo apt install btop
+  sudo apt install fd-find
+  sudo apt install ripgrep
+
+  echo "Installing Lazygit..."
+  LAZYGIT_VERSION=$(curl -s "https://api.github.com/repos/jesseduffield/lazygit/releases/latest" | \grep -Po '"tag_name": *"v\K[^"]*')
+  curl -Lo lazygit.tar.gz "https://github.com/jesseduffield/lazygit/releases/download/v${LAZYGIT_VERSION}/lazygit_${LAZYGIT_VERSION}_Linux_x86_64.tar.gz"
+  tar xf lazygit.tar.gz lazygit
+  sudo install lazygit -D -t /usr/local/bin/
+  rm lazygit*
+
+  # Install zoxide https://github.com/ajeetdsouza/zoxide
+  curl -sSfL https://raw.githubusercontent.com/ajeetdsouza/zoxide/main/install.sh | sh
+
+  # install eza
+  sudo mkdir -p /etc/apt/keyrings
+  wget -qO- https://raw.githubusercontent.com/eza-community/eza/main/deb.asc | sudo gpg --dearmor -o /etc/apt/keyrings/gierens.gpg
+  echo "deb [signed-by=/etc/apt/keyrings/gierens.gpg] http://deb.gierens.de stable main" | sudo tee /etc/apt/sources.list.d/gierens.list
+  sudo chmod 644 /etc/apt/keyrings/gierens.gpg /etc/apt/sources.list.d/gierens.list
+  sudo apt update
+  sudo apt install -y eza
+
+  # Git will need to have been installed already
+  sudo apt install git-delta
+  git config --global core.pager delta
+  git config --global interactive.diffFilter 'delta --color-only'
+  git config --global delta.navigate true
+  git config --global delta.side-by-side true
+  git config --global merge.conflictStyle zdiff3
+
+  # install Dust
+  curl -sSfL https://raw.githubusercontent.com/bootandy/dust/refs/heads/master/install.sh | sh
 
 fi
 
 # Setup the symlinks things if needed
-if [ $symlinks = true ] ; then
-   
-    # Starship config
-    echo "Setting up Starship config..."
-    rm $HOME/.config/starship.toml
-    ln -s $HOME/dotfiles/starship/starship.toml $HOME/.config/starship.toml 
-
-    # Set up my bash things and use zsh as my bash shell (backup/work shell)
-    # clear out any symlinks/files to be replaced by my own
-    rm $HOME/.bashrc
-    rm $HOME/.profile
-    rm $HOME/.work-profile
-    # Create symlinks
-    ln -s $HOME/dotfiles/bash/bashrc $HOME/.bashrc
-    ln -s $HOME/dotfiles/bash/profile $HOME/.profile
-    ln -s $HOME/dotfiles/bash/work-profile $HOME/.work-profile
-
-    rm $HOME/.zshrc
-    ln -s $HOME/dotfiles/bash/zshrc $HOME/.zshrc
-
-    rm $HOME/.zshenv
-    ln -s $HOME/dotfiles/bash/zshenv $HOME/.zshenv
+if [ $symlinks = true ]; then
 
-fi
+  # Starship config
+  echo "Setting up Starship config..."
+  rm "$HOME/.config/starship.toml"
+  ln -s "$HOME/dotfiles/starship/starship.toml" "$HOME/.config/starship.toml"
+
+  # Set up my bash things and use zsh as my bash shell (backup/work shell)
+  # clear out any symlinks/files to be replaced by my own
+  rm "$HOME/.bashrc"
+  rm "$HOME/.profile"
+  rm "$HOME/.work-profile"
+  # Create symlinks
+  ln -s "$HOME/dotfiles/bash/bashrc" "$HOME/.bashrc"
+  ln -s "$HOME/dotfiles/bash/profile" "$HOME/.profile"
+  ln -s "$HOME/dotfiles/bash/work-profile" "$HOME/.work-profile"
 
+  rm "$HOME/.zshrc"
+  ln -s "$HOME/dotfiles/bash/zshrc" "$HOME/.zshrc"
+
+  rm "$HOME/.zshenv"
+  ln -s "$HOME/dotfiles/bash/zshenv" "$HOME/.zshenv"
+
+fi