diff --git a/content/docs/getting-started.md b/content/docs/getting-started.md
index e1815ed..2c17c9a 100644
--- a/content/docs/getting-started.md
+++ b/content/docs/getting-started.md
@@ -103,7 +103,7 @@ This copies the hand-placed body-18 joints for this painting out of the guide's
 uv run --with rtmlib --with onnxruntime python ../getting-started/scripts/keypoints.py inputs/painting.png --out keypoints.json
 ```
 
-With this painting, the script's ankles land about 44 px below the hand-placed ones, just off the shoe art. Since `@rig-c/parts` 1.17.0, `propose` drafts a chain per leg from them, and step 8 then refuses with `ASSEMBLE_LIMB_JOINT_ON_ART` on `foot_l` (measured 2026-10-19 on 1.17.0 through 1.41.0). Until that is resolved upstream, use the hand-placed file for this example.
+With this painting the script puts the left ankle just off the shoe art. On `@rig-c/parts` 1.41.1, step 7 then prints one `LINT` beginning `LINT foot_l at [428, 1077], the l_ankle joint and leg_l1's tip, lies on none of leg_l's art within 1 px along its joint line`, drafts that leg without its ankle cut, and the build goes green (measured 2026-10-20 from empty caches: all ten steps in 166 s, the model download included). From 1.17.0 through 1.41.0 the same joints made step 8 refuse with `ASSEMBLE_LIMB_JOINT_ON_ART`; use the hand-placed file if you are on one of those.
 
 ### 7. Draft the bones
 
diff --git a/docs/getting-started/index.html b/docs/getting-started/index.html
index 3eaf6f0..c0ec7a1 100644
--- a/docs/getting-started/index.html
+++ b/docs/getting-started/index.html
@@ -175,7 +175,7 @@ <h3 id="6-put-the-joints-in-place">6. Put the joints in place</h3>
 <p><strong>Detecting the joints with a script instead</strong> needs <a href="https://docs.astral.sh/uv/">uv</a> and downloads about 300 MB of pose models on first run:</p>
 <pre><code class="language-sh">uv run --with rtmlib --with onnxruntime python ../getting-started/scripts/keypoints.py inputs/painting.png --out keypoints.json
 </code></pre>
-<p>With this painting, the script's ankles land about 44 px below the hand-placed ones, just off the shoe art. Since <code>@rig-c/parts</code> 1.17.0, <code>propose</code> drafts a chain per leg from them, and step 8 then refuses with <code>ASSEMBLE_LIMB_JOINT_ON_ART</code> on <code>foot_l</code> (measured 2026-10-19 on 1.17.0 through 1.41.0). Until that is resolved upstream, use the hand-placed file for this example.</p>
+<p>With this painting the script puts the left ankle just off the shoe art. On <code>@rig-c/parts</code> 1.41.1, step 7 then prints one <code>LINT</code> beginning <code>LINT foot_l at [428, 1077], the l_ankle joint and leg_l1's tip, lies on none of leg_l's art within 1 px along its joint line</code>, drafts that leg without its ankle cut, and the build goes green (measured 2026-10-20 from empty caches: all ten steps in 166 s, the model download included). From 1.17.0 through 1.41.0 the same joints made step 8 refuse with <code>ASSEMBLE_LIMB_JOINT_ON_ART</code>; use the hand-placed file if you are on one of those.</p>
 <h3 id="7-draft-the-bones">7. Draft the bones</h3>
 <pre><code class="language-sh">bunx rig-parts propose --parts work/rig --source inputs/painting.png --out work --keypoints keypoints.json
 bun ../getting-started/scripts/take.ts work/proposal.json config.json bones meshes regions motion limbs
diff --git a/docs/getting-started/index.md b/docs/getting-started/index.md
index a557c15..64f5fb5 100644
--- a/docs/getting-started/index.md
+++ b/docs/getting-started/index.md
@@ -95,7 +95,7 @@ This copies the hand-placed body-18 joints for this painting out of the guide's
 uv run --with rtmlib --with onnxruntime python ../getting-started/scripts/keypoints.py inputs/painting.png --out keypoints.json
 ```
 
-With this painting, the script's ankles land about 44 px below the hand-placed ones, just off the shoe art. Since `@rig-c/parts` 1.17.0, `propose` drafts a chain per leg from them, and step 8 then refuses with `ASSEMBLE_LIMB_JOINT_ON_ART` on `foot_l` (measured 2026-10-19 on 1.17.0 through 1.41.0). Until that is resolved upstream, use the hand-placed file for this example.
+With this painting the script puts the left ankle just off the shoe art. On `@rig-c/parts` 1.41.1, step 7 then prints one `LINT` beginning `LINT foot_l at [428, 1077], the l_ankle joint and leg_l1's tip, lies on none of leg_l's art within 1 px along its joint line`, drafts that leg without its ankle cut, and the build goes green (measured 2026-10-20 from empty caches: all ten steps in 166 s, the model download included). From 1.17.0 through 1.41.0 the same joints made step 8 refuse with `ASSEMBLE_LIMB_JOINT_ON_ART`; use the hand-placed file if you are on one of those.
 
 ### 7. Draft the bones
 
diff --git a/llms-full.txt b/llms-full.txt
index 2674f9b..713080f 100644
--- a/llms-full.txt
+++ b/llms-full.txt
@@ -241,7 +241,7 @@ This copies the hand-placed body-18 joints for this painting out of the guide's
 uv run --with rtmlib --with onnxruntime python ../getting-started/scripts/keypoints.py inputs/painting.png --out keypoints.json
 ```
 
-With this painting, the script's ankles land about 44 px below the hand-placed ones, just off the shoe art. Since `@rig-c/parts` 1.17.0, `propose` drafts a chain per leg from them, and step 8 then refuses with `ASSEMBLE_LIMB_JOINT_ON_ART` on `foot_l` (measured 2026-10-19 on 1.17.0 through 1.41.0). Until that is resolved upstream, use the hand-placed file for this example.
+With this painting the script puts the left ankle just off the shoe art. On `@rig-c/parts` 1.41.1, step 7 then prints one `LINT` beginning `LINT foot_l at [428, 1077], the l_ankle joint and leg_l1's tip, lies on none of leg_l's art within 1 px along its joint line`, drafts that leg without its ankle cut, and the build goes green (measured 2026-10-20 from empty caches: all ten steps in 166 s, the model download included). From 1.17.0 through 1.41.0 the same joints made step 8 refuse with `ASSEMBLE_LIMB_JOINT_ON_ART`; use the hand-placed file if you are on one of those.
 
 ### 7. Draft the bones