Target Printer: Bambu Lab P2S (
0.4 mmHardened Steel Nozzle)
Build Volume:256 × 256 × 256 mm
Print Surface: Bambu Textured PEI Plate
Profiles Location:profiles/and.agents/skills/bambu-studio-ai/resources/profiles/
User Slicer Presets:%APPDATA%\BambuStudio\user\<user-id>\(filament/andprocess/)
| Filament Brand & Name | Category / Chemistry | Spool Rated Temp | 1st Layer Nozzle / Bed | Print Nozzle / Bed | Flow Ratio | Max Volumetric Flow ( |
Max Outer Wall Speed | Primary Application |
|---|---|---|---|---|---|---|---|---|
| UJOYBIO Elite PLA+ (EjoyBio) | Toughened PLA Pro (High-Speed) | 195 – 220 °C |
204 °C / 60 °C |
212 – 218 °C / 55 °C |
0.98 |
17.0 mm³/s |
80 – 120 mm/s |
Mechanical snap fits, planters, dispensers, high impact |
| Kingroon PLA Basic | Standard Rapid Prototyping PLA | 190 – 220 °C |
215 °C / 60 °C |
220 – 225 °C / 55 °C |
0.98 |
16.0 mm³/s |
100 – 140 mm/s |
General rapid prototypes, brackets, decorative parts |
| Kingroon PLA Matte | Mineral-Dulled Low-Gloss PLA | 190 – 220 °C |
208 °C / 60 °C |
215 – 220 °C / 55 °C |
0.98 |
13.5 mm³/s |
70 – 90 mm/s |
Zero-glare satin parts; hides layer lines naturally |
| Inslogic Tri-Color Silk PLA | Co-Extruded 3-Color High-Luster | 200 – 230 °C |
210 °C / 60 °C |
218 – 225 °C / 55 °C |
0.97 |
12.0 mm³/s |
40 – 55 mm/s (Strict)
|
Living room showcase planters, architectural silk models |
| Kingroon Silk PLA | High-Luster Modified Silk PLA | 195 – 230 °C |
210 °C / 60 °C |
215 – 222 °C / 55 °C |
0.97 |
11.0 mm³/s |
35 – 50 mm/s (Strict)
|
Metallic sheen figurines, cosmetic accents |
| Bambu PETG HF | High-Flow Polyethylene Terephthalate | 230 – 260 °C |
250 °C / 70 °C |
255 °C / 70 °C |
0.95 |
16.0 mm³/s |
80 – 120 mm/s |
Watertight irrigation saucers, chemical/UV resistance |
| Bambu ASA | Acrylonitrile Styrene Acrylate | 240 – 270 °C |
260 °C / 90 °C |
265 °C / 90 °C |
0.96 |
12.0 mm³/s |
60 – 90 mm/s |
Direct outdoor sun, high heat resistance (> 95 °C) |
Every profile is formatted as <layer_height> <Brand> <Type> @BBL P2S, pre-configured with speeds, accelerations, and shell thicknesses calibrated for that specific filament chemistry and layer resolution:
| Bambu Studio Process Preset Name | Layer Height | Outer Wall Speed | Inner Wall Speed | Sparse Infill Speed | Solid Infill Speed | Top Surface Speed | Outer Wall Accel | Normal Accel | Top / Bot Shells | Target Application |
|---|---|---|---|---|---|---|---|---|---|---|
0.08mm UjoyBio PLA Plus @BBL P2S |
0.08 mm |
45 mm/s |
90 mm/s |
120 mm/s |
100 mm/s |
40 mm/s |
1,500 mm/s² |
4,500 mm/s² |
9 / 7 |
Miniature figurines, micro-threads |
0.12mm UjoyBio PLA Plus @BBL P2S |
0.12 mm |
60 mm/s |
120 mm/s |
160 mm/s |
140 mm/s |
60 mm/s |
2,000 mm/s² |
5,000 mm/s² |
7 / 5 |
Fine debossed text, crisp logos |
0.16mm UjoyBio PLA Plus @BBL P2S |
0.16 mm |
70 mm/s |
140 mm/s |
200 mm/s |
170 mm/s |
80 mm/s |
2,500 mm/s² |
6,000 mm/s² |
6 / 5 |
Snap pins, sliding joints, gears |
0.20mm UjoyBio PLA Plus @BBL P2S |
0.20 mm |
90 mm/s |
180 mm/s |
250 mm/s |
200 mm/s |
90 mm/s |
3,000 mm/s² |
7,000 mm/s² |
5 / 4 |
General functional prototypes |
0.24mm UjoyBio PLA Plus @BBL P2S |
0.24 mm |
110 mm/s |
200 mm/s |
270 mm/s |
220 mm/s |
100 mm/s |
3,500 mm/s² |
8,000 mm/s² |
4 / 3 |
Coffee dispenser body, housings |
0.28mm UjoyBio PLA Plus @BBL P2S |
0.28 mm |
120 mm/s |
180 mm/s |
220 mm/s |
180 mm/s |
100 mm/s |
3,500 mm/s² |
8,000 mm/s² |
4 / 3 |
Max Throughput: Bulky planters |
0.08mm Kingroon PLA Basic @BBL P2S |
0.08 mm |
50 mm/s |
100 mm/s |
130 mm/s |
110 mm/s |
40 mm/s |
1,500 mm/s² |
5,000 mm/s² |
9 / 7 |
High-detail rapid prototypes |
0.12mm Kingroon PLA Basic @BBL P2S |
0.12 mm |
65 mm/s |
130 mm/s |
170 mm/s |
150 mm/s |
60 mm/s |
2,000 mm/s² |
6,000 mm/s² |
7 / 5 |
Fine cosmetic brackets |
0.16mm Kingroon PLA Basic @BBL P2S |
0.16 mm |
80 mm/s |
160 mm/s |
220 mm/s |
180 mm/s |
80 mm/s |
2,500 mm/s² |
7,000 mm/s² |
6 / 5 |
Fast mechanical assemblies |
0.20mm Kingroon PLA Basic @BBL P2S |
0.20 mm |
100 mm/s |
190 mm/s |
260 mm/s |
210 mm/s |
90 mm/s |
3,000 mm/s² |
8,000 mm/s² |
5 / 4 |
Daily fast printing |
0.24mm Kingroon PLA Basic @BBL P2S |
0.24 mm |
125 mm/s |
210 mm/s |
270 mm/s |
230 mm/s |
100 mm/s |
4,000 mm/s² |
10,000 mm/s² |
4 / 3 |
Fast enclosures, organizer trays |
0.28mm Kingroon PLA Basic @BBL P2S |
0.28 mm |
120 mm/s |
190 mm/s |
230 mm/s |
190 mm/s |
100 mm/s |
3,500 mm/s² |
8,000 mm/s² |
4 / 3 |
Max Throughput: Storage bins |
0.08mm Kingroon PLA Matte @BBL P2S |
0.08 mm |
40 mm/s |
80 mm/s |
110 mm/s |
95 mm/s |
40 mm/s |
1,200 mm/s² |
4,000 mm/s² |
9 / 7 |
Satin miniatures, architectural models |
0.12mm Kingroon PLA Matte @BBL P2S |
0.12 mm |
50 mm/s |
100 mm/s |
140 mm/s |
120 mm/s |
60 mm/s |
1,800 mm/s² |
5,000 mm/s² |
7 / 5 |
Matte logos, faceplates |
0.16mm Kingroon PLA Matte @BBL P2S |
0.16 mm |
65 mm/s |
130 mm/s |
180 mm/s |
150 mm/s |
80 mm/s |
2,200 mm/s² |
6,000 mm/s² |
6 / 5 |
Low-reflection mechanical casings |
0.20mm Kingroon PLA Matte @BBL P2S |
0.20 mm |
80 mm/s |
150 mm/s |
210 mm/s |
175 mm/s |
90 mm/s |
2,500 mm/s² |
7,000 mm/s² |
5 / 4 |
Satin planters, desk accessories |
0.24mm Kingroon PLA Matte @BBL P2S |
0.24 mm |
90 mm/s |
170 mm/s |
230 mm/s |
190 mm/s |
100 mm/s |
3,000 mm/s² |
8,000 mm/s² |
4 / 3 |
Large matte planters (zero layer lines) |
0.28mm Kingroon PLA Matte @BBL P2S |
0.28 mm |
95 mm/s |
160 mm/s |
190 mm/s |
160 mm/s |
100 mm/s |
3,000 mm/s² |
7,000 mm/s² |
4 / 3 |
Max Throughput: Bulky matte pots |
0.08mm Inslogic Tri-Color Silk PLA @BBL P2S |
0.08 mm |
35 mm/s |
80 mm/s |
120 mm/s |
100 mm/s |
40 mm/s |
1,200 mm/s² |
4,000 mm/s² |
9 / 7 |
Mirror-gloss fine sculptures |
0.12mm Inslogic Tri-Color Silk PLA @BBL P2S |
0.12 mm |
40 mm/s |
100 mm/s |
150 mm/s |
125 mm/s |
60 mm/s |
1,500 mm/s² |
5,000 mm/s² |
7 / 5 |
High-sheen jewelry, ribbons |
0.16mm Inslogic Tri-Color Silk PLA @BBL P2S |
0.16 mm |
45 mm/s |
120 mm/s |
180 mm/s |
150 mm/s |
80 mm/s |
1,800 mm/s² |
6,000 mm/s² |
6 / 5 |
Decorative vases, emblems |
0.20mm Inslogic Tri-Color Silk PLA @BBL P2S |
0.20 mm |
50 mm/s |
140 mm/s |
200 mm/s |
170 mm/s |
90 mm/s |
2,000 mm/s² |
7,000 mm/s² |
5 / 4 |
Showcase living room planters |
0.24mm Inslogic Tri-Color Silk PLA @BBL P2S |
0.24 mm |
55 mm/s |
160 mm/s |
220 mm/s |
180 mm/s |
100 mm/s |
2,500 mm/s² |
7,000 mm/s² |
4 / 3 |
Helical-ribbed silk planters |
0.28mm Inslogic Tri-Color Silk PLA @BBL P2S |
0.28 mm |
55 mm/s |
150 mm/s |
190 mm/s |
160 mm/s |
100 mm/s |
2,500 mm/s² |
7,000 mm/s² |
4 / 3 |
Fast silk exterior shells |
0.08mm Kingroon Silk PLA @BBL P2S |
0.08 mm |
30 mm/s |
70 mm/s |
110 mm/s |
95 mm/s |
40 mm/s |
1,200 mm/s² |
4,000 mm/s² |
9 / 7 |
High-gloss metallic miniatures |
0.12mm Kingroon Silk PLA @BBL P2S |
0.12 mm |
35 mm/s |
90 mm/s |
140 mm/s |
120 mm/s |
60 mm/s |
1,500 mm/s² |
5,000 mm/s² |
7 / 5 |
Glossy filigree, badges |
0.16mm Kingroon Silk PLA @BBL P2S |
0.16 mm |
40 mm/s |
110 mm/s |
170 mm/s |
140 mm/s |
80 mm/s |
1,800 mm/s² |
6,000 mm/s² |
6 / 5 |
Silk trim, accent collars |
0.20mm Kingroon Silk PLA @BBL P2S |
0.20 mm |
45 mm/s |
130 mm/s |
190 mm/s |
160 mm/s |
90 mm/s |
2,000 mm/s² |
7,000 mm/s² |
5 / 4 |
Sculptural decorative planters |
0.24mm Kingroon Silk PLA @BBL P2S |
0.24 mm |
50 mm/s |
150 mm/s |
210 mm/s |
175 mm/s |
100 mm/s |
2,200 mm/s² |
7,000 mm/s² |
4 / 3 |
Fast silk basins and saucers |
0.28mm Kingroon Silk PLA @BBL P2S |
0.28 mm |
50 mm/s |
140 mm/s |
180 mm/s |
150 mm/s |
100 mm/s |
2,200 mm/s² |
7,000 mm/s² |
4 / 3 |
High-volume shiny planters |
Yes, 100% natively.
-
The FDM Rule of Thumb: The maximum reliable layer height for an FDM nozzle is
$70% - 75%$ of the orifice diameter:$$0.4\text{ mm} \times 0.70 = \mathbf{0.28\text{ mm}}$$ -
System Inheritance: Bambu Studio contains
fdm_process_single_0.28.jsonin its core engine (C:\Program Files\Bambu Studio\resources\profiles\BBL\process\). While Bambu Lab omitted an official factory preset label specifically for the P2S (preferring 0.24mm as conservative stock), creating0.28mm <Brand> <Type> @BBL P2Slinking tofdm_process_single_0.28activates it flawlessly. -
Volumetric Safety Throttling: At
$0.28\text{ mm}$ layer height and$0.45\text{ mm}$ line width:$$\text{Flow at 200 mm/s} = 0.28 \times 0.45 \times 200 = \mathbf{25.2\text{ mm}^3/\text{s}}$$ Because the P2S hotend melts PLA at$16–18\text{ mm}^3/\text{s}$ , the linear speed is automatically capped by the slicer to$\sim 140–160\text{ mm/s}$ . However, because each layer deposits 40% more plastic than 0.20 mm, total print duration drops by ~35% to 45%.
- Chemistry: Poly-Lactic Acid modified with core-shell elastomeric impact modifiers.
-
Thermal Sweet Spot:
-
First Layer:
204 °Cnozzle,60 °Cbed. (Prevents prime line ooze whisker while ensuring strong PEI grip). -
High-Speed Layers:
215 – 218 °Cnozzle,55 °Cbed. -
Precision 0.16mm Layers:
204 – 208 °Cnozzle to prevent micro-stringing and soft corners.
-
First Layer:
-
Volumetric Flow (
$V_{max}$ ):17.0 mm³/s. -
Installed Filament Preset:
UjoyBio Elite PLA+ 0.4
- Chemistry: High-purity standard PLA optimized for rapid prototyping.
-
Thermal Sweet Spot:
-
First Layer:
215 °Cnozzle,60 °Cbed. -
Other Layers:
220 – 225 °Cnozzle,55 °Cbed.
-
First Layer:
-
Volumetric Flow (
$V_{max}$ ):16.0 mm³/s. -
Installed Filament Preset:
Kingroon PLA Basic 0.4
- Chemistry: PLA compounded with microscopic mineral dulling particles to produce a zero-glare, non-reflective surface.
-
Flow & Strength Warning: Matte additives increase melt shear viscosity. Never set
$V_{max} > 13.5\text{ mm}^3/\text{s}$ , or interlayer bonding drops significantly. -
Thermal Sweet Spot:
-
First Layer:
208 °Cnozzle,60 °Cbed. -
Other Layers:
215 – 220 °Cnozzle,55 °Cbed.
-
First Layer:
-
Installed Filament Preset:
Kingroon PLA Matte 0.4
- Chemistry: Multi-polymer blend containing acrylic or polyester gloss-enhancement agents. Co-extruded with 3 color ribbons running longitudinally.
-
The Silk Golden Rule: Speed Dictates Luster:
-
Outer Wall Speed: Must be locked to
40 – 55 mm/sacross all layer heights. Fast printing (> 80 mm/s) quenches the polymer before specular reflection aligns, turning the surface into dull, milky plastic. -
Inner Walls & Infill: Can be pushed to
150 – 200 mm/swith nozzle temp at220 – 225 °C.
-
Outer Wall Speed: Must be locked to
-
Thermal Sweet Spot:
-
50 – 100 mm/s (Maximum Luster):
208 – 212 °Cnozzle,60 °Cbed. -
100 – 200 mm/s (Internal High Speed):
218 – 225 °Cnozzle,55 °Cbed.
-
50 – 100 mm/s (Maximum Luster):
-
Volumetric Flow (
$V_{max}$ ):12.0 mm³/s. -
Installed Filament Preset:
Inslogic Tri-Color Silk PLA 0.4
- Chemistry: Single-color high-luster silk PLA.
-
Thermal Sweet Spot:
-
First Layer:
210 °Cnozzle,60 °Cbed. -
Other Layers:
218 – 222 °Cnozzle,55 °Cbed.
-
First Layer:
-
Outer Wall Speed: Strictly
35 – 50 mm/s. -
Volumetric Flow (
$V_{max}$ ):11.0 mm³/s. -
Installed Filament Preset:
Kingroon Silk PLA 0.4