cli.md

CLI reference

Every bmad-loop subcommand, its options, its --json document, the process exit codes, and the validate check ids. bmad-loop <command> --help prints the same option list from the installed version. For where run state lives on disk, see run state; for policy keys, see configuration.

Global options

• The top-level parser documents only -h and --version. A subcommand is required; a missing or unknown one exits 2.
• --project PROJECT — every subcommand except relay accepts it. It names the target project root; the default is the current directory. Before dispatch, these subcommands apply the project's [mux] backend choice; a broken policy.toml falls back to auto-selection there. Commands that need the policy load it themselves and fail with error: …, exit 1.
• --json — accepted by validate, plugins, probe-adapter, decisions, confirm, list, status, diagnose, cleanup and clean. See Machine-readable output.

Run references

resume, resolve, status, attach, stop, delete, archive and diagnose take a run_id that may be partial. A run's short ref is the segment after the last - of its id (bmad-loop list prints it).

Ref	Resolves to
exact run id	that run
partial	the one run whose short ref starts with it, or whose full id ends with it
empty	refused (empty run ref)
no match	no such run: <ref>, exit 1
several matches	ambiguous run ref '<ref>' matches N runs: plus each id, exit 1
omitted	status, attach, diagnose only: the newest run; no runs found and exit 1 when none
unreadable run list	refused, naming the fault, when the unreadable entries could change the answer

clean --keep RUN_ID is the exception: it compares full run ids exactly.

Subcommands

Listed in bmad-loop --help order. --project is omitted from the option tables below.

init

Installs the hook relay, the bundled bmad-loop-* skills, the policy template, and .gitignore entries into the target project.

bmad-loop init [--project PROJECT] [--cli PROFILE] [--no-skills] [--force-skills]

Option	Description
--cli PROFILE	Profile to register hooks for; repeatable. A packaged profile (claude, codex, gemini, copilot, antigravity, opencode-http) or an overlay profile name. Default: the profiles policy.toml names across all roles, else claude.
--no-skills	Skip the skill copy; write only hooks, policy and .gitignore.
--force-skills	Replace bmad-loop-* skill directories that already exist (default: keep them and print a hint).

• For each profile, merges a bmad-loop relay <Event> registration (absolute path of this installation's console script) into the profile's hook config file. Hookless profiles print no hooks needed.
• Copies bmad-loop-resolve, bmad-loop-sweep and bmad-loop-setup into each profile's skill tree. Writes .bmad-loop/policy.toml only when it is missing. Appends any missing .gitignore lines from .bmad-loop/runs/, .bmad-loop/cache/, .bmad-loop/policy.toml, _bmad/render/.
• Exits 1 with FAIL: … on an unknown profile, a target path that resolves outside the project, or a hook config file that is not valid JSON.

validate

Runs the preflight checks.

bmad-loop validate [--project PROJECT] [--spec FOLDER] [--render-probe] [--probes] [--json]

Option	Description
--spec FOLDER	Validate stories mode against FOLDER/stories.yaml. Overrides [stories] source and skips the sprint-status gate.
--render-probe	Also run each dev skill's render command in a throwaway copy of _bmad/ (needs network access).
--probes	Also run every [environment] probe on this host. All probes run, each bounded by probe_timeout_s; any failure is a problem.
--json	Print the findings as one JSON document.

• Exit 0 when no finding has severity problem, else 1. Warnings do not change the exit code.
• Runs no project-controlled commands unless --render-probe or --probes is given.
• Checks are chained: when an earlier gate fails (for example the policy does not load), the checks that depend on it emit nothing. A missing check id means the check did not run, not that it passed. Every id is listed under validate checks.

JSON: validate --json.

mux

Lists the registered terminal-multiplexer backends and the selected one, or saves a backend choice.

bmad-loop mux [--project PROJECT] [--clear] [--force] [{set}] [name]

Option / action	Description
(none)	Print a NAME PLATFORM AVAILABLE VERSION SELECTED table with the selection reason.
set <name>	Save name as [mux] backend in .bmad-loop/policy.toml (created from the template if missing).
set --clear	Comment the key back out so auto-selection applies.
--force	With set: save a name that is not registered in this process (for example a backend installed only elsewhere).

• Built-in backends: tmux (non-Windows) and psmux (Windows). Selection precedence is described in multiplexer backends.
• If the forced backend (BMAD_LOOP_MUX_BACKEND or [mux] backend) cannot be resolved, the table still prints, then FAIL: … and exit 1. Never prompts.

plugins

Lists discovered plugins and their trust grants, or manages a project plugin's grant.

bmad-loop plugins [--project PROJECT] [--json] [{list,enable,accept,revoke}] [name]

Action	Effect
list	Default. Print NAME ORIGIN SURFACE GRANT ENABLED PATH. Exits 0 whatever the trust state (validate owns the verdict).
enable <name>	Hash the plugin directory without running it and record the grant. Refuses a grant that already exists and changed.
accept <name>	Re-pin a granted plugin that changed, after printing the file changes.
revoke <name>	Remove the grant (works after the plugin directory is gone).

• GRANT is one of granted, ungranted, mismatch, stale, unreadable, missing (grant without a plugin) or n/a (no grant needed). The grant store lives outside the project tree, under the state root.
• --json works only with list; with another action it exits 2. A name with list exits 1.
• Refuses (exit 1) built-in and entry-point plugins (trusted by provenance; enable those with [plugins] enabled), plugins with no executable surface, and an unreadable grant store. Never writes policy.toml.

JSON: plugins --json.

adapters

Lists the registered coding-CLI adapter kinds and which profiles select each.

bmad-loop adapters [--project PROJECT]

• Prints NAME ORIGIN NEEDS MUX PROFILES. ORIGIN is builtin or external. A profile's adapter field selects its kind (default generic).
• Warns on stderr about profiles naming an unregistered kind and about external packages that failed to load; exits 0. A malformed project profile overlay exits 1.

probe-adapter

Collects and sanitizes the data needed to finalize a coding-CLI profile. Alias: collect-adapter-data. See the adapter authoring guide.

bmad-loop probe-adapter [--project PROJECT] [--probe] [--transcript TRANSCRIPT] [--session-dir SESSION_DIR]
                        [--binary BINARY] [--model MODEL] [--workspace PATH] [--timeout TIMEOUT] [--out OUT] [--json] cli

Option	Description
cli	Profile name. Hookless (HTTP) profiles are refused.
--probe	Live capture: one trivial turn in a temp workspace, recording only the shape of each hook payload. Default: a scan that launches nothing.
--transcript TRANSCRIPT	Transcript file to inspect; skips discovery.
--session-dir SESSION_DIR	Directory searched for the newest transcript.
--binary BINARY	Binary for a CLI with no profile; produces a reduced report.
--model MODEL	Model for the probe turn (--probe only).
--workspace PATH	Also report whether PATH is in the profile's [workspace_trust] list; exit 1 unless trusted or when the profile declares no such list.
--timeout TIMEOUT	Probe turn timeout in seconds. Default: 90.
--out OUT	Write the report (or JSON document) to this file instead of stdout.
--json	Emit a JSON document instead of the Markdown report.

• Exits 1 when the profile is unknown (without --binary), the leak self-check fires (nothing is written), or hook or workspace trust is not trusted (the report is still written).

JSON: probe-adapter --json.

run

Runs the story loop (dev → review → verify → commit) over actionable stories from sprint-status.yaml, or from stories.yaml in stories mode.

bmad-loop run [--project PROJECT] [--spec FOLDER] [--epic EPIC] [--story STORY] [--max-stories MAX_STORIES] [--dry-run]

Option	Description
--spec FOLDER	Stories mode: dispatch from FOLDER/stories.yaml. Overrides [stories] source.
--epic EPIC	Only stories of this epic (integer). Sprint mode only; ignored with a note in stories mode.
--story STORY	Sprint mode: E-S / E.S, a slug fragment, or a full key. Stories mode: a story id.
--max-stories MAX_STORIES	Stop after N stories.
--dry-run	Print the per-story plan and spawn nothing.

• Sprint mode selects stories at backlog or ready-for-dev. A --story that matches nothing, matches several stories, or is not actionable exits 1.
• Refused with exit 1 before anything is created on: git below the supported floor, a dirty worktree, a worktree-isolation conflict, missing base skills, or a failing plugin-trust verdict.
• Prints run <id> starting (attach: bmad-loop attach), then the run summary; exits 0 once the engine has run.

sweep

Triages open entries in the deferred-work ledger and executes them as bundles through the normal pipeline. With --archive, moves closed entries to an archive file instead.

bmad-loop sweep [--project PROJECT] [--no-prompt] [--decisions-only] [--max-bundles MAX_BUNDLES]
                [--only DW-ID,... | --min-severity {low,medium,high,critical}] [--repeat | --no-repeat]
                [--max-cycles MAX_CYCLES] [--dry-run] [--archive] [--before DATE]

Option	Description
--no-prompt	Skip decision prompts; run only decision-free bundles.
--decisions-only	Triage and record decisions; run no bundles.
--max-bundles MAX_BUNDLES	Override [sweep] max_bundles.
--only DW-ID,...	Triage only these open entries (comma-separated). Exclusive with --min-severity.
--min-severity {low,…}	Triage entries at this severity or higher. Exclusive with --only.
--repeat, --no-repeat	Override [sweep] repeat (re-triage newly deferred work after each cycle).
--max-cycles MAX_CYCLES	Override [sweep] max_cycles.
--dry-run	List open entries (or, with --archive, the entries that would move) and write nothing.
--archive	Move closed entries to deferred-work-archive.md, leaving an id-preserving stub in the ledger.
--before DATE	With --archive only: archive entries closed before this ISO date.

• --archive starts no sessions and combines only with --dry-run and --before. It is refused while any run of the project may be live.
• A normal sweep has the same launch refusals as run, plus a missing bmad-loop-sweep skill.
• Prints sweep <id> starting (attach: bmad-loop attach), then the summary. Exits 0, except 1 when the engine crashed on an --only sweep.

resume

Continues a paused or interrupted run or sweep.

bmad-loop resume [--project PROJECT] [--accept-baseline] run_id

Option	Description
--accept-baseline	For this resume only, adopt the current HEAD as the baseline of every restarted in-place story instead of preserving commits above the old baseline.

• Refused with exit 1 for a live engine, a finished run, a sweep whose ledger cannot be read, and the same git-floor, isolation, skill and plugin-trust gates as run. Does not require a clean worktree.
• Discards any pending stop request and re-reads the policy and config before continuing.

resolve

Resolves an escalated story, then re-arms it and resumes the run. Without a mode flag it launches an interactive resolve agent for a CRITICAL escalation. Procedures: escalation recovery.

bmad-loop resolve [--project PROJECT] [--story STORY] [--no-interactive]
                  [--restore-patch PATH | --adopt-branch | --reverify | --abandon] [--resume | --no-resume] [--force] run_id

Option	Description
--story STORY	Story to resolve. Default: the run's paused story.
--no-interactive	Skip the resolve agent (the spec was fixed by hand), then re-arm and resume. With --abandon: skip the confirm prompt.
--restore-patch PATH	Re-arm the spec to in-review and re-apply this saved patch, so review resumes on the attempted change.
--adopt-branch	Commit and merge the kept worktree branch as-is and mark the story done. Worktree isolation only; not for sweeps.
--reverify	Keep a DEFERRED (or environment-fault ESCALATED) story's attempt, replay [verify], then review and commit. No dev session; not for sweeps.
--abandon	Close an escalated replay run unmerged: park dirty work on a preserve ref, remove the worktree, keep the branch.
--resume / --no-resume	Resume without prompting / only re-arm. Default: prompt, then resume. Not with --abandon (exit 2).
--force	Proceed when engine liveness cannot be verified. A provably live engine still blocks.

• --restore-patch, --adopt-branch, --reverify and --abandon are mutually exclusive.
• --reverify --story KEY on a finished sprint run creates a new replay run for a kept DEFERRED worktree unit; the finished run is not modified.
• Refuses with exit 1, leaving the run unchanged, when the run is not paused at an escalation (--reverify --story accepts any pause), the engine is live, there is no escalated story, or a DEFERRED story is targeted without --reverify. Declining the confirm prompt exits 0 and leaves the run paused.

decisions

Answers deferred-work decisions that earlier sweeps left unanswered.

bmad-loop decisions [--project PROJECT] [--list] [--json]

Option	Description
--list	List pending decisions with their options and the recommended one.
--json	Emit the pending decisions as one JSON document. Implies --list.

• Prompts once per decision. close marks the ledger entry done immediately; build and keep-open are saved to .bmad-loop/decisions.json for the next sweep.
• Exits 1 if an answer fails to record. Unreadable ledger or run directories produce a note: on stderr and exit 0.

JSON: decisions --json.

confirm

Completes a story parked at awaiting-operator once the external actions it lists are done. Nothing is re-driven.

bmad-loop confirm [--project PROJECT] [--list] [--yes] [--reverify] [--json] [story_key]

Option	Description
story_key	Parked story to confirm.
--list	List parked stories and their owed actions.
--yes	Skip the per-action acknowledgment prompt.
--reverify	After the acknowledgments, run the environment probes, then the [verify] commands; any failure blocks (exit 1). Nothing runs when no [verify] commands are configured.
--json	Emit the parked set as one JSON document. Implies --list.

• After each action is acknowledged, appends an ## Operator Confirmation section to the spec, sets the spec and board to done, removes the park record, and commits the result (best-effort). Declining any action changes nothing and exits 0.
• Exits 2 without a story_key, --list or --json. Exits 1 when the story is not parked in this checkout or its park record disagrees with the committed state.

JSON: confirm --json.

list

Lists every run and sweep. Alias: ls.

bmad-loop list [--project PROJECT] [--json]

• Prints REF TYPE STATUS RUN ID, oldest first. Status is running, paused, finished, stopped, crashed, interrupted or unknown (see derived status).
• Prints no runs found and exits 0 when there are none. A run whose state.json cannot be read is listed with TYPE ? and status unknown. When the run listing itself is incomplete, stderr gets warning: run listing incomplete: ….

JSON: list --json.

status

Shows a run's state: status line, token totals, one row per story (phase, dev and review counts, tokens, commit or defer reason, preserve ref), the sprint backlog remaining (stories mode: the stories done count), and the count of pending decisions.

bmad-loop status [--project PROJECT] [--json] [run_id]

• The status line (status: …) is finished, PAUSED (<stage>) — <reason>, in progress — graceful stop pending (will stop after the current item), or in progress (or interrupted).
• Exits 1 with no runs found, or on a bad or ambiguous ref (stdout stays empty under --json).

JSON: status --json.

diagnose

Writes a sanitized diagnostic dump of a run or sweep to hand to maintainers. Alias: diag.

bmad-loop diagnose [--project PROJECT] [--all] [--out OUT] [--json] [--max-journal-entries N] [run_id]

Option	Description
--all	Dump every run in the project (run_id is ignored).
--out OUT	Write the report or JSON document to this file instead of stdout.
--json	Emit JSON instead of the Markdown report.
--max-journal-entries N	Maximum scrubbed journal entries per run; 0 = histogram only. Default: 200.

• Identifiers are pseudonymized and the output is re-scanned before it is written. If the leak self-check fires, it prints FAIL: refusing to emit … on stderr, writes nothing, and exits 1.
• With --out, the ok: … confirmation goes to stdout in text mode and to stderr under --json.

JSON: diagnose --json.

attach

Attaches the terminal to a run through the selected multiplexer backend.

bmad-loop attach [--project PROJECT] [run_id]

• Attaches to the run's control window when a sweep is waiting on a decision or no agent session is live; otherwise to the live agent session.
• Exits 1 with nothing to attach for run <id> when there is no target; otherwise exits with the multiplexer client's exit code.

stop

Stops a run. The default is a hard stop. See stopping a run.

bmad-loop stop [--project PROJECT] [--graceful | --cancel-graceful] run_id

Option	Description
--graceful	Let the in-flight story or bundle finish through commit, then stop resumably. Suppresses pending auto-sweeps.
--cancel-graceful	Withdraw a pending stop request of either mode.

• Hard stop: exits 0 once the engine is stopped, or marks a non-finished run with a dead engine stopped. A finished run prints already finished and exits 1. Exits 1 if the engine's process identity cannot be verified.
• --graceful exits 0 when the request is lodged or one is already pending; exits 1 when the run is finished or its engine is provably dead (use resume).
• --cancel-graceful exits 1 when nothing was pending.

delete

Permanently removes a run directory and its out-of-tree control-plane directory.

bmad-loop delete [--project PROJECT] [--force] run_id

Option	Description
--force	Hard-stop a live engine first (this ends its agent session), and skip the live-agent-session guard (skipping it kills no session).

• Without --force, refuses (exit 1) when the engine is provably alive or an agent session that may belong to the project is live. Unverifiable liveness only warns.
• Also prunes git worktree entries for worktrees the run held.

archive

Compresses a run into .bmad-loop/archive/<run-id>.tar.gz, then removes the run directory and its control-plane directory. To archive the deferred-work ledger, use sweep --archive.

bmad-loop archive [--project PROJECT] [--force] run_id

• --force and the refusals are the same as delete. The tarball holds the in-tree run directory only.

cleanup

Removes leftover multiplexer sessions and parked control windows for this project's runs. Scope: cleanup vs clean.

bmad-loop cleanup [--project PROJECT] [--dry-run] [--json]

Option	Description
--dry-run	List what would be removed; kill nothing.
--json	Emit one JSON document instead of text.

• Always exits 0. Scan failures and kills that could not be verified are reported on stderr (or in the JSON document).

JSON: cleanup --json.

clean

Reclaims disk from concluded runs according to [cleanup]. Scope: cleanup vs clean.

bmad-loop clean [--project PROJECT] [--dry-run] [--keep RUN_ID] [--retain N] [--hard] [--json]

Option	Description
--dry-run	List what would be reclaimed; remove nothing.
--keep RUN_ID	Never touch this run (full id, exact match). Repeatable.
--retain N	Keep the newest N concluded runs out of archive/delete (still trimmed when [cleanup] trim_artifacts is on). Overrides [cleanup] run_retention. 0 keeps none by count.
--hard	Delete runs past retention instead of archiving them.
--json	Emit one JSON document instead of text.

• Exits 0 once the policy loads; per-run faults are warnings on stderr or fields in the JSON document.

JSON: clean --json.

tui

Opens the interactive dashboard. Needs the tui extra (uv tool install 'bmad-loop[tui]'); without it, prints an install hint and exits 1. See the TUI guide.

bmad-loop tui [--project PROJECT] [--low-frame-rate]

Option	Description
--low-frame-rate	Cap rendering at 15 fps and turn off animations (for slow or SSH links). [tui] low_frame_rate does the same. Existing TEXTUAL_FPS / TEXTUAL_ANIMATIONS values win.

relay

Writes one session event file from a coding-CLI hook payload on stdin. A hook target that init registers, not a command to run by hand.

bmad-loop relay [event]

• event is the canonical event name (Stop, SessionStart, …); default Unknown.
• Does nothing unless BMAD_LOOP_RUN_DIR and BMAD_LOOP_TASK_ID are set (the session was launched by bmad-loop). Writes the event to $BMAD_LOOP_EVENTS_DIR (default $BMAD_LOOP_RUN_DIR/events).
• Always exits 0 and never writes to stdout. Takes no --project and never reads policy.

Machine-readable output (--json)

• stdout carries exactly one JSON object and nothing else.
• schema_version is a top-level integer in every document, versioned per command. Changes are additive: a new field may appear without a bump; removing or renaming a field, or changing a field's type or meaning, bumps that command's version.
• Errors produce no document: the message goes to stderr, stdout stays empty, and the exit code is nonzero.
• Verdict commands emit the full document and also exit nonzero to carry their answer: validate (read ok) and probe-adapter (read hook_trust / workspace_trust). Parse non-empty stdout whatever the exit code.
• stderr carries notes, warnings and ok: confirmations. Warnings that text mode prints become document fields in JSON mode where the schema has one.
• --out FILE (diagnose, probe-adapter) writes the same bytes --json > FILE would; stdout is then empty, and the exit code still carries any verdict.
• diagnose and probe-adapter documents have sorted keys and pass the leak guard; an optional top-level backstop_repairs appears when the guard pseudonymized a stray value.

Command	schema_version
validate	1
plugins	1
probe-adapter	2
decisions	1
confirm	1
list	1
status	1
diagnose	4
cleanup	2
clean	1

validate --json

Field	Type	Meaning
ok	bool	no finding has severity problem; matches the exit code
mode	str	sprint or stories
spec_folder	str	stories spec folder; "" in sprint mode
counts	object	{ok, warning, problem} counts
findings	array	one entry per finding, in the order the checks ran

Each finding has check (the stable check id — the only field safe to match on), severity (ok / warning / problem), message (free text), and detail (check-specific object, or null).

plugins --json

Field	Type	Meaning
plugins	array	one row per discovered plugin, plus one per grant whose plugin is gone
store_fault	str | null	why the grant store could not be read (every row is then judged ungranted)

Each row: name, origin, path (POSIX path from the code root), surface ({hooks, workflows, python, seeds} bools), grant_required, status (the GRANT values above), enabled (listed in [plugins] enabled), active (a launch would run it), pinned_digest, current_digest, changed (list of paths).

probe-adapter --json

Field	Type	Meaning
cli, binary	str	probed CLI and binary
mode	str	scan or probe
known_profile, binary_found	bool	a packaged profile exists; the binary resolved
dialect	str | null	hook dialect
usage_parser	str	usage parser (none without a known profile)
hooks_registered	bool | null	relay hooks are present
hook_trust, workspace_trust	str | null	trusted, untrusted or unverifiable
declared_events	object	native event → canonical event, as the profile declares
version, help	str | null	the CLI's own --version / --help output
captured_events	array	{native_event, canonical_event, payload_keys, payload_schema}
transcript	object | null	location, format and size of the discovered transcript
tokens	object | null	token-schema inference
warnings, next_steps	list[str]	advisory text

decisions --json

decisions: pending decisions in ledger order. Each has id, question, context, recommendation, and options[]; each option has key, label, effect, intent, resolution, bundle_name, and recommended (true when key == recommendation).

confirm --json

parked: stories at awaiting-operator, in story-key order. Each has story_key, actions (list of str), spec_file, spec_status, board_status, commit ("" until a commit carries the park record), run_id, parked_at, confirmable, confirmation_recorded, resumable (an interrupted confirmation confirm will finish), and drift (human-readable).

list --json

Field	Type	Meaning
runs	array	one entry per run, oldest first
listing_fault	str | null	what could not be read; when set, an empty runs means "could not list"

Each run: ref, run_id, run_type (? when state.json is unreadable), started_at, status, paused_stage ("" unless paused).

status --json

Built from the run's state.json.

Field	Type	Meaning
run_id, run_type, source, started_at	str	run identity
status	str	finished, paused, crashed, stopped or in-progress
finished, stopped, crashed	bool	raw flags
graceful_stop_pending	bool	a graceful stop request is pending and the engine is not dead
crash_error	str | null	crash message
paused_stage, paused_reason, paused_story_key	str | null	pause context
cache_read_weight	number	cache-read token weight from the run's policy snapshot
tokens	object	{raw, weighted} run totals
adapters	object | null	{dev, review, triage, retro: {name, model}} from the policy snapshot
sweeps_refused	object	auto-sweep trigger → refusal reason; {} when none
tasks	array	one entry per story

Each task: story_key, epic, phase, attempt, review_cycle, tokens (input_tokens, output_tokens, cache_read_tokens, cache_creation_tokens, raw, weighted), commit_sha, defer_reason, preserve_ref, adapters_used ({role: {name, model}}).

diagnose --json

Field	Type	Meaning
generated_at	str	timestamp
tool_version	str	bmad-loop version
env	object	OS, Python, package, multiplexer, tmux and git versions
runs	array	per run: identity, flags, policy, phase histogram, token totals, tasks, journal, files, warnings

cleanup --json

The --dry-run plan and the outcome share this shape.

Field	Type	Meaning
dry_run	bool	plan (true) or outcome (false)
sessions	object	agent sessions (below)
ctl_windows	object	control windows (below)

sessions: removed (run ids whose session kill was attempted), live (left alone), unverifiable_pid (subset of removed whose engine liveness could not be proven), legacy_leftovers, legacy_kill_commands (a pre-upgrade control session in this project's registry mapped to the command that ends it, null when the backend is not psmux; a session a run may own is left out), legacy_unverified, superseded_ctl_unverified (a check on this project's own registry for such a session, or one that withholds its command, could not be made), and scan_error (present only when the scan failed).

ctl_windows: removed (verified gone, or would close under --dry-run), survived, unverifiable (kill outcome could not be checked), undetermined (kept because the window's state could not be read), scan_error (str or null; when set, the other lists mean "no answer").

clean --json

The --dry-run plan and the outcome share this shape.

Field	Type	Meaning
dry_run	bool	plan (true) or outcome (false)
policy	object	effective retain, plus retention_days, archive_old, trim_artifacts
freed_bytes	int	estimated bytes reclaimed
worktrees	list[str]	worktree paths torn down
trimmed, archived, deleted, protected	list[str]	run ids
unverifiable_pid	list[str]	touched runs whose engine liveness could not be proven
state_dirs_swept	int	orphaned out-of-tree state directories reclaimed
listing_fault, state_dir_fault	str | null	what could not be read
worktree_faults	list[str]	"<run id>: <fault>" per run whose worktree teardown was incomplete

Exit codes

Code	Name	Meaning
0	OK	Success. On POSIX, Ctrl+C during a run's engine loop ends the run as a resumable stopped run and also exits 0.
1	FAILURE	A command failed or refused, an unexpected error was caught (error: … on stderr), or a verdict command (validate, probe-adapter) reported a failing verdict.
2	USAGE	The invocation was malformed: rejected by argument parsing, or a flag combination a command refuses (plugins <action> --json, resolve --abandon --resume, confirm with no story key and no --list / --json).
130	INTERRUPTED	Ctrl+C outside a run's engine loop (config load, setup, a non-run command). Prints interrupted on stderr.

Codes 3–129 and 131 and above are unallocated.

validate checks

Every finding's check is one of these ids. Severity is ok, warning or problem; only problem fails validate.

Check id	Severity	What it checks
bmad-config	ok / problem	BMAD config loads and artifact paths resolve
policy	ok / problem	.bmad-loop/policy.toml loads
policy.isolation-repo-root	problem	isolation = "worktree" with the project outside the code root
policy.isolation-shared-artifact-dir	warning	under worktree isolation, an artifact dir shared with the main checkout
policy.model-qualified	warning	an opencode-http role model that is not provider/model
policy.extra-args-unservable	warning	an opencode-http role's extra_args repeats an adapter-owned serve flag
policy.effort-unsupported	warning	effort set on a profile whose adapter ignores it
policy.bypass-dropped	warning	an explicit extra_args drops the profile's bypass_args
adapter.profile	problem	a role's adapter name does not resolve to a loadable profile
adapter.binary	ok / problem	the profile binary is on PATH
adapter.binary-unrunnable	warning	a packaged profile's binary is on PATH but --version fails
adapter.httpx	ok / problem	httpx is importable for an opencode-http profile
adapter.launch-args-unservable	warning	an opencode-http profile's launch_args cannot form a valid serve command
adapter.opencode-version	ok / warning	the OpenCode server API an opencode-http binary's --version reports is supported
adapter.hookless	ok	the profile is hookless, so hook checks are skipped
adapter.kind	ok / problem	the profile's adapter kind is registered
adapter.external	warning	a third-party adapter entry point failed to load
adapter.external-profile	warning	a third-party profile entry point failed to load
hooks.config-parse	problem	the hook config file is not valid JSON or has malformed handlers
hooks.registered	ok / problem	relay hooks are registered for the profile's events
hooks.trust	ok / problem	Codex project hook trust is current
hooks.relay-path-unsafe	warning	a registered relay path has shell metacharacters the host's quoting leaves unsafe
hooks.relay-present	ok / problem	each registered relay executable exists and is usable
hooks.relay-stale	warning	a registered relay path differs from this installation's relay
queue.sprint-status	ok / problem	sprint mode: sprint-status.yaml loads; counts actionable stories
queue.sprint-status-unknown-keys	warning	sprint mode: unknown keys in sprint-status.yaml were ignored
queue.nested-specs	warning	sprint mode: spec-like files in artifact subdirectories, or unreadable subdirectories
queue.stories-manifest	ok / problem	stories mode: stories.yaml and SPEC.md are valid
git.worktree-clean	ok / problem	the code root's worktree is clean
git.probe	problem	the git check itself failed (spawn, timeout, error)
git.version	ok / problem	host git meets the supported floor
git.render-tracked	warning	the rendered-skill output dir is tracked by git
deferred.ledger-unreadable	problem	the deferred-work ledger cannot be read
deferred.ledger-untracked	warning	the ledger is neither committed nor gitignored
deferred.ledger-ignored-isolated	warning	the ledger is gitignored under worktree isolation, so session writes are lost
deferred.hard-gate	ok / problem	an actionable story is gated (gate:) by a ledger entry not marked done
deferred.hard-gate-unstructured	warning	a not-done entry declares a gate validate cannot enforce (malformed, empty or misspelled gate:, or a prose-only HARD GATE:)
deferred.closes-malformed	warning	a spec's closes_deferred has an unreadable shape
deferred.closes-entry-unreadable	warning	closes_deferred names entries that are neither open nor done
deferred.closes-unknown	warning	closes_deferred names ids not in the ledger
operator.actions-malformed	warning	sprint mode: a parked story's operator_actions declares nothing readable
operator.confirm-interrupted	warning	sprint mode: a confirmation signed the spec but never advanced the board
operator.registry-stale	warning	sprint mode: a park record disagrees with the spec or board, so confirm will refuse it
operator.park-record-missing	warning	sprint mode: the board parks a story that no park record claims
plugins.manifests	ok / warning / problem	every plugin.toml parses (problem); unsupported manifests are skipped (warning)
plugins.trust	ok / problem	project plugins are granted and unchanged, and the grant store is readable
mux.backend	ok / problem	the selected multiplexer backend is available
mux.preflight	problem	multiplexer selection or readiness raised an error
mux.backends-detected	ok / warning	inventory of detected backends when more than one is registered; detection failure (warning)
mux.backend-probe	warning	a registered backend's platform or availability probe raised an error
mux.selection	ok / warning	why the backend was selected; fallback is a warning
mux.external-backend	warning	a third-party multiplexer backend entry point failed to load
host.process	ok / problem	the process host resolves; an unknown BMAD_LOOP_PROCESS_HOST is a problem
host.win32-on-wsl-path	warning	a Windows interpreter is working on a WSL UNC project path
notify.desktop-unavailable	warning	[notify] desktop is on but the platform has no desktop notifier
environment.probes-not-run	ok	probes are configured but --probes was not passed
environment.probes-none	ok	--probes was passed with no probes configured
environment.probe	ok / problem	one per probe under --probes; detail.status is pass, fail, timeout or interrupted
skills.base	ok	the dev primitive and review layers are present
skills.base-missing	problem	the dev primitive or a review-layer skill is not installed
skills.base-incomplete	problem	the dev primitive is missing marker files
skills.base-shim	problem	the legacy dev primitive is unusable and the new one is absent
skills.dev-renderer	problem	a renderer-stub primitive lacks its renderer script
skills.dev-renderer-sources	problem	a renderer stub's render sources are unresolved
skills.dev-renderer-config	problem	a renderer stub's central config layer is missing
skills.dev-render-probe	ok / problem	--render-probe only: the stub's render command succeeds in a temp copy
skills.customize-legacy	warning	customize overrides named for the legacy dev primitive no longer apply
skills.customize-unreadable	warning	a customize override is not valid TOML
skills.review-layers-empty	problem	the dev primitive has no enabled review layer
skills.review-layer-missing	problem	a referenced review-layer skill is not installed
skills.review-layer-unresolved	warning	a conditionally referenced review-layer skill is not installed
skills.stories-dispatch	ok	stories mode: the dev primitive supports folder+id dispatch
skills.stories-dispatch-missing	problem	stories mode: the dispatch probe file is missing
skills.stories-dispatch-stale	problem	stories mode: the dev primitive lacks folder+id dispatch
skills.sweep	ok	the bmad-loop-sweep skill is present in the triage skill trees
skills.sweep-missing	problem	bmad-loop-sweep is not installed in a triage skill tree
skills.sweep-incomplete	problem	bmad-loop-sweep is missing files

The set is closed (checks.VALIDATE_CHECKS); plugins cannot add check ids.