Generated by tools/catalog/coverage.py from the catalog's MCU descriptions and the
engine's model table; CI fails when it is not current. A peripheral marked
missing keeps its register values and raises mcu.unsupported_access; one
marked modelled may still leave out behaviour its MCU's fidelity declares. The
evidence for each model is in STATUS.md.
| MCU | Modelled | Registers only | Missing | Peripherals |
|---|---|---|---|---|
| ESP32 | 20 | 0 | 25 | 45 |
| ESP32-C3 | 35 | 0 | 0 | 35 |
| ATmega328P | 15 | 0 | 0 | 15 |
| PIC24FJ1024GB610 | 11 | 4 | 17 | 32 |
| PIC32MX795F512L | 15 | 4 | 41 | 60 |
| nRF52840 | 25 | 2 | 22 | 49 |
| RP2040 | 30 | 5 | 0 | 35 |
| FE310-G002 | 13 | 0 | 1 | 14 |
| STM32F103C8 | 26 | 0 | 1 | 27 |
| STM32F446RE | 53 | 0 | 15 | 68 |
| STM32F446ZE | 53 | 0 | 15 | 68 |
Boards: ESP32-DevKitC V4.
20 of 45 peripherals modelled, 0 registers only, 25 missing.
| Peripheral | Model | State |
|---|---|---|
| DPORT | esp32-dport |
modelled |
| AES | — | missing |
| RSA | — | missing |
| SHA | esp32-sha |
modelled |
| UART0 | esp32-uart |
modelled |
| SPI1 | esp32-spi |
modelled |
| SPI0 | esp32-spi |
modelled |
| GPIO | esp32-gpio |
modelled |
| GPIO_SD | — | missing |
| FLASH_ENCRYPTION | — | missing |
| FRC_TIMER | — | missing |
| RTC_CNTL | esp32-rtc |
modelled |
| RTC_IO | esp32-rtcio |
modelled |
| SENS | esp32-sens |
modelled |
| RTC_I2C | — | missing |
| IO_MUX | esp32-iomux |
modelled |
| HINF | — | missing |
| UHCI1 | — | missing |
| I2S0 | — | missing |
| UART1 | esp32-uart |
modelled |
| I2C0 | esp32-i2c |
modelled |
| UHCI0 | — | missing |
| SLCHOST | — | missing |
| RMT | esp32-rmt |
modelled |
| PCNT | — | missing |
| SLC | — | missing |
| LEDC | esp32-ledc |
modelled |
| EFUSE | esp32-efuse |
modelled |
| NRX | — | missing |
| BB | — | missing |
| MCPWM0 | — | missing |
| TIMG0 | esp32-timg |
modelled |
| TIMG1 | esp32-timg |
modelled |
| SPI2 | — | missing |
| SPI3 | — | missing |
| APB_CTRL | esp32-apbctrl |
modelled |
| I2C1 | esp32-i2c |
modelled |
| SDHOST | — | missing |
| EMAC_DMA | — | missing |
| EMAC_EXT | — | missing |
| EMAC_MAC | — | missing |
| TWAI0 | — | missing |
| MCPWM1 | — | missing |
| I2S1 | — | missing |
| UART2 | esp32-uart |
modelled |
Declared omissions: Wi-Fi, Bluetooth and the RF front end (WIFI_MAC, BB, NRX, FE: their registers keep what is written); the double-precision accelerator's instructions (F64ADDC, F64ITER and the others: their encodings are public, not what they do; a program that runs one stops with a diagnostic), though its registers are kept; PSRAM (DRAM1), the boot remap, the APB/AHB access permissions, the caches' lock regions and timing (the mapped pages are read whole), the MMU's access-error interrupts; RMT: the memory's power-down (MEM_PD), STATUS's STATE and the APB-side error bits, the carrier on an idle output; the SAR ADCs: the nonlinearity above about 2450 mV at 11 dB and a chip's spread from the fitted line, noise, the ULP's and the digital controller's (DMA, I2S) conversions, the Hall sensor, ADC2's arbitration with Wi-Fi, the RTC IO MUX's routing of a pad to the ADC (not checked); the DACs: the cosine-wave generator and the DMA path (I2S0), the output's impedance (a stiff source: the datasheet gives none) and its offset and nonlinearity; I2C: the non-FIFO mode (NONFIFO_EN, RX_REC_FULL, TX_SEND_EMPTY), SAMPLE_SCL_LEVEL, the input filters (only their share of the SCL high time), 10-bit addressing's R/W check; the peripherals without a model yet: I2S0/1, SPI2/3 (HSPI, VSPI), MCPWM, PCNT, TWAI, SDMMC, EMAC, the touch sensor, the RTC IO MUX's other pads and the ULP coprocessor, the AES and RSA accelerators, flash encryption; sleep modes (light and deep sleep, the power domains), brown-out; the eFuse 3/4 coding scheme's check, BLOCK0's per-field write protection.
Boards: ESP32-C3-DevKitM-1.
35 of 35 peripherals modelled, 0 registers only, 0 missing.
| Peripheral | Model | State |
|---|---|---|
| UART0 | esp32c3-uart |
modelled |
| SPI1 | esp32c3-spimem |
modelled |
| SPI0 | esp32c3-spimem |
modelled |
| GPIO | esp32c3-gpio |
modelled |
| GPIO_SD | esp32c3-sdm |
modelled |
| RTC_CNTL | esp32c3-rtc |
modelled |
| EFUSE | esp32c3-efuse |
modelled |
| IO_MUX | esp32c3-iomux |
modelled |
| UHCI1 | esp32c3-uhci |
modelled |
| UART1 | esp32c3-uart |
modelled |
| I2C0 | esp32c3-i2c |
modelled |
| UHCI0 | esp32c3-uhci |
modelled |
| RMT | esp32c3-rmt |
modelled |
| LEDC | esp32c3-ledc |
modelled |
| TIMG0 | esp32c3-timg |
modelled |
| TIMG1 | esp32c3-timg |
modelled |
| SYSTIMER | esp32c3-systimer |
modelled |
| SPI2 | esp32c3-spi2 |
modelled |
| APB_CTRL | esp32c3-apbctrl |
modelled |
| TWAI0 | esp32c3-twai |
modelled |
| I2S0 | esp32c3-i2s |
modelled |
| AES | esp32c3-aes |
modelled |
| SHA | esp32c3-sha |
modelled |
| RSA | esp32c3-rsa |
modelled |
| DS | esp32c3-ds |
modelled |
| HMAC | esp32c3-hmac |
modelled |
| DMA | esp32c3-gdma |
modelled |
| APB_SARADC | esp32c3-adc |
modelled |
| USB_DEVICE | esp32c3-usbjtag |
modelled |
| SYSTEM | esp32c3-system |
modelled |
| SENSITIVE | esp32c3-pms |
modelled |
| INTERRUPT_CORE0 | esp32c3-intmtx |
modelled |
| EXTMEM | esp32c3-cache |
modelled |
| XTS_AES | esp32c3-xts |
modelled |
| ASSIST_DEBUG | esp32c3-assist |
modelled |
Declared omissions: every peripheral not named in the claims (their registers keep what is written); the PLL's power and lock, and the RC oscillators' spread (they run at their nominal frequencies); a USB host on GPIO18 and GPIO19 (the CDC-ACM port on the computer, its DTR and RTS resets, the JTAG side: ADR-031's native USB); the USB pads' own pull-ups and pin swap beyond the IO MUX's reset; the analog blocks' registers' reset values (they read 0 until written) and what their values do (the PLL's frequency comes from SYSTEM, the regulators' voltages are not modelled); the o-code calibration's time; the random number generator's entropy: RND_DATA and the Wi-Fi MAC's random number register are seeded generators (a chip's MAC seeds them), the same sequence every run so that a run replays, whatever noise sources are on; the GPIO's input filter and synchronisation, sleep mode (the pads' sleep configuration) and the drive strengths' effect; UHCI: the HCI packet header (sequence numbers, acknowledgement, checksum and CRC), the quick-sent register queues, the FIFO hang timeouts, UHCI1 (no GDMA channel serves it; its registers keep what is written); the UARTs' RTS output; the permission control: the unprivileged environment (the world controller's non-secure world, or user mode with PMS_PRIVILEGE_MODE_SEL: the CPU is always privileged, as ESP-IDF keeps it), the peripheral regions, the PIF's non-word access monitor, the GDMA and external memory checks; XTS-AES: the time a manual encryption takes (it completes at once), the download-mode encryption controls (ENABLE_DOWNLOAD_DB_ENCRYPT, G0CB_DECRYPT, MANUAL_ENCRYPT); HMAC and the digital signature: their times (they complete at once), what a soft JTAG enable does, the DS memories' read-back (the hardware reads 0); the eFuses' other write protection bits; I2S: slave mode, PDM transmission and its converter, the MCLK output, the FIFO's depth and the hung timeout, CONF_SIGLE_DATA, RX_STOP_MODE, the timing delays; TWAI: overload frames, triple sampling, the clock output and twai_bus_off_on, STATUS's MS; the bus's clocks are exact, so no resynchronisation follows the start of frame's hard synchronisation, and a receiver takes a frame at the end of its end of frame, not its sixth bit; the sigma-delta modulation's bit pattern (the TRM gives the density; a first-order modulator's evenest spread is used), its register clock gate (SIGMADELTA_CG) and SPI_SWAP; RMT: the free-running divider's phase (REF_CNT_RST; each transmission is timed from its start) and the carrier's phase (it restarts with each stretch it modulates); the memory's power-down; the status registers' STATE and APB-side error bits; LEDC: a fractional divider's alternating A and A + 1 counts (each count is the average length); a CLK_DIV below 1 (the timer stops); light-sleep; I2C: the SCL and SDA filters (the nets are clean); the state machines' own timeouts (SCL_ST_TO, SCL_MAIN_ST_TO); SR's state fields; a slave's SDA_SAMPLE point (it reacts at the edge), SLV_TX_AUTO_START_EN 0 and 10-bit addressing's R/W check; GP-SPI2: slave mode and the configurable segmented transfer (USR_CONF); the timing compensation (DIN_MODE, DIN_NUM, DOUT_MODE); CLK_MODE's clock after CS; SPI_UPDATE takes no time; the AFIFO errors; GDMA: bytes move at once, with no FIFO and no bus bandwidth (the priorities change nothing); the in-link's auto return; err_eof (UHCI0's); SAR ADC: the TRM's ideal transfer (no offset, gain error, nonlinearity or noise; the eFuses hold no calibration); ADC2's errata; the arbiter's priorities; the initial code's offset. Temperature sensor: no self-heating or settling; the eFuses' write and read protection, their check values and times; the chip's calibration data (BLOCK2 is blank); the cache's enable and bus-shut bits, the MMU entry fault and the access counters; the cache holds whole pages, not 16 KB of lines (core/mcu/esp32c3/cache.c); the flash's QPI mode, continuous read mode, SFDP table and block protection; SPI_MEM's auto-suspend and wait-idle, and the SPI clock's time (transfers take none); the SHA, AES and RSA accelerators' times (they finish at once, CONSTANT_TIME's too); the RSA memories' power-down; the debug module and the debug CSRs; the performance counter's load and jump hazard events; the interrupt controller's transient state after a register write; Wi-Fi beyond WPA2- and WPA3-Personal (a 40 MHz PPDU is carried as a 20 MHz one on the primary channel), and Bluetooth LE beyond advertising, scanning and connections (docs/engineering/c3-radios.md, steps 3 to 6): the MAC's retransmissions, contention (EDCA, CCA), the TSF's adjustment to an access point's beacons and its timers (TBTT, the TSF timer interrupts), TKIP, WEP, GCMP and protected management frames, aggregation, the transmit power the PHY sets (20 dBm is sent), promiscuous reception and the BSSID filter. Bluetooth LE beyond advertising (with scan responses), passive and active scanning and connections: the SCAN_REQs received reported in the receive descriptors (the scan request notification), the scan and initiator filter policies, the 2M and Coded PHYs, extended and periodic advertising, encryption, privacy, slave latency, an event's maximum length, CRC errors, sleep, the received signal strength in the descriptors, the transmit power the controller sets (+9 dBm is sent) and the radio's controls (they keep what is written). The PHY's measurements read as a calibrated front end at once (their real readings and times are not published), and the radio's register blocks' reset values are unknown (they read 0).
Boards: Arduino Uno R3 (ATmega328P).
15 of 15 peripherals modelled, 0 registers only, 0 missing.
| Peripheral | Model | State |
|---|---|---|
| PORTB | avr-port |
modelled |
| PORTC | avr-port |
modelled |
| PORTD | avr-port |
modelled |
| EXINT | avr-exint |
modelled |
| TC0 | avr-tc8 |
modelled |
| TC1 | avr-tc16 |
modelled |
| TC2 | avr-tc8 |
modelled |
| CPU | avr-cpu |
modelled |
| EEPROM | avr-eeprom |
modelled |
| SPI | avr-spi |
modelled |
| AC | avr-ac |
modelled |
| WDT | avr-wdt |
modelled |
| ADC | avr-adc |
modelled |
| TWI | avr-twi |
modelled |
| USART0 | avr-usart |
modelled |
Declared omissions: damage past the absolute maximum ratings (the datasheet names no point where it happens: warnings only), the 200 mA limit on VCC and GND, and the protection diodes' current going into VCC (they clamp to the nominal supply: an unpowered part is not powered through its pins); SPI slave mode; TWI slave mode, arbitration and bus errors; the watchdog oscillator's spread (exactly 128 kHz) and safety level 2 (WDTON); the analog comparator's synchronisation delay, offset and hysteresis; the input capture synchroniser's constant delay; the external clock inputs T0 and T1; timer 2's asynchronous clock; LPM's read protection by the boot lock bits and the interrupts they hold off; reading or running the RWW section while RWWSB is set (undefined on the part: LPM reads 0xff and warns, code runs as flash holds it); the low fuse's clock selection (CKSEL, SUT: the board's description gives the clock) and the lock bits LB1 and LB2 (they guard external programming, not modelled); frame and parity errors on bytes from the session's input; brown-out detection.
Boards: Explorer 16/32 (PIC24FJ1024GB610 PIM).
11 of 32 peripherals modelled, 4 registers only, 17 missing.
| Peripheral | Model | State |
|---|---|---|
| INT | pic24-intc |
modelled |
| OSC | pic24-osc |
modelled |
| RCON | storage |
registers only |
| HLVD | pic24-hlvd |
missing |
| PMP | pic24-epmp |
missing |
| CRC | pic24-crc |
missing |
| REFO | pic24-refo |
missing |
| PMD | storage |
registers only |
| TMR | pic24-tmr |
modelled |
| CTMU | pic24-ctmu |
missing |
| RTCC | pic24-rtcc |
missing |
| IC | pic24-ic |
missing |
| OC | pic24-oc |
missing |
| CCP | pic24-ccp |
missing |
| CMP | pic24-cmp |
missing |
| ANCFG | storage |
registers only |
| UART1 | pic24-uart |
modelled |
| UART2 | pic24-uart |
modelled |
| UART3 | pic24-uart |
modelled |
| UART4 | pic24-uart |
modelled |
| UART5 | pic24-uart |
modelled |
| UART6 | pic24-uart |
modelled |
| SPI | pic24-spi |
missing |
| CLC | pic24-clc |
missing |
| I2C | pic24-i2c |
missing |
| DMA | pic24-dma |
missing |
| USB | pic24-usb |
missing |
| PAD | storage |
registers only |
| GPIO | pic24-gpio |
modelled |
| ADC1 | pic24-adc |
missing |
| NVM | pic24-nvm |
missing |
| PPS | pic24-pps |
modelled |
Declared omissions: the ADC, SPI, I2C, input capture, output compare, the MCCP and SCCP modules, the EPMP, the RTCC, DMA, USB, the comparators, the CRC, the CLCs, the CTMU, HLVD and the reference clock (plain registers); the watchdog and deep sleep (it never resets the part); flash programming (NVM) and the dual partitions; the PLL's other modes (4x, 6x, 8x: FOSC is 32 MHz divided by CPDIV) and the DCO; the external interrupt pins (INTx); the dsPIC's DSP instructions (the core's dsPIC33E mode is not used by this part).
Boards: Explorer 16/32 (PIC32MX795F512L PIM).
15 of 60 peripherals modelled, 4 registers only, 41 missing.
| Peripheral | Model | State |
|---|---|---|
| WDT | pic32-wdt |
missing |
| RTCC | pic32-rtcc |
missing |
| TMR1 | pic32-tmr |
modelled |
| TMR2 | pic32-tmr |
modelled |
| TMR3 | pic32-tmr |
modelled |
| TMR4 | pic32-tmr |
modelled |
| TMR5 | pic32-tmr |
modelled |
| ICAP1 | pic32-ic |
missing |
| ICAP2 | pic32-ic |
missing |
| ICAP3 | pic32-ic |
missing |
| ICAP4 | pic32-ic |
missing |
| ICAP5 | pic32-ic |
missing |
| OCMP1 | pic32-oc |
missing |
| OCMP2 | pic32-oc |
missing |
| OCMP3 | pic32-oc |
missing |
| OCMP4 | pic32-oc |
missing |
| OCMP5 | pic32-oc |
missing |
| I2C3 | pic32-i2c |
missing |
| I2C4 | pic32-i2c |
missing |
| I2C5 | pic32-i2c |
missing |
| I2C1 | pic32-i2c |
missing |
| I2C2 | pic32-i2c |
missing |
| SPI3 | pic32-spi |
missing |
| SPI2 | pic32-spi |
missing |
| SPI4 | pic32-spi |
missing |
| SPI1 | pic32-spi |
missing |
| UART1 | pic32-uart |
modelled |
| UART4 | pic32-uart |
modelled |
| UART3 | pic32-uart |
modelled |
| UART6 | pic32-uart |
modelled |
| UART2 | pic32-uart |
modelled |
| UART5 | pic32-uart |
modelled |
| PMP | pic32-pmp |
missing |
| ADC10 | pic32-adc10 |
missing |
| CVR | pic32-cmp |
missing |
| CMP1 | pic32-cmp |
missing |
| CMP2 | pic32-cmp |
missing |
| CMP | pic32-cmp |
missing |
| OSC | pic32-osc |
modelled |
| CFG | pic32-cfg |
modelled |
| NVM | pic32-nvm |
missing |
| RCON | storage |
registers only |
| ICD | storage |
registers only |
| INT | pic32-evic |
modelled |
| BMX | storage |
registers only |
| DMAC | pic32-dma |
missing |
| DMAC0 | pic32-dma |
missing |
| DMAC1 | pic32-dma |
missing |
| DMAC2 | pic32-dma |
missing |
| DMAC3 | pic32-dma |
missing |
| DMAC4 | pic32-dma |
missing |
| DMAC5 | pic32-dma |
missing |
| DMAC6 | pic32-dma |
missing |
| DMAC7 | pic32-dma |
missing |
| PCACHE | storage |
registers only |
| USB | pic32-usb |
missing |
| GPIO | pic32-gpio |
modelled |
| ETH | pic32-eth |
missing |
| CAN1 | pic32-can |
missing |
| CAN2 | pic32-can |
missing |
Declared omissions: the ADC, SPI, I2C, input capture, output compare, the PMP, the RTCC, DMA, USB, Ethernet, CAN and the comparators (plain registers); the watchdog (plain registers: it never resets the part); flash programming (NVM); the prefetch cache and the bus matrix's partitions; sleep and idle; the external interrupt pins (INTx); the debugger's ICD registers (plain storage).
Boards: nRF52840 DK (PCA10056).
25 of 49 peripherals modelled, 2 registers only, 22 missing.
| Peripheral | Model | State |
|---|---|---|
| FICR | storage |
registers only |
| UICR | nrf-uicr |
modelled |
| CLOCK | nrf-clock |
modelled |
| RADIO | nrf-radio |
missing |
| UARTE0 | nrf-uart |
modelled |
| SPIM0 | nrf-spim |
modelled |
| SPIM1 | nrf-spim |
modelled |
| NFCT | — | missing |
| GPIOTE | nrf-gpiote |
modelled |
| SAADC | nrf-saadc |
modelled |
| TIMER0 | nrf-timer |
modelled |
| TIMER1 | nrf-timer |
modelled |
| TIMER2 | nrf-timer |
modelled |
| RTC0 | nrf-rtc |
modelled |
| TEMP | nrf-temp |
missing |
| RNG | nrf-rng |
missing |
| ECB | — | missing |
| CCM | — | missing |
| WDT | nrf-wdt |
missing |
| RTC1 | nrf-rtc |
modelled |
| QDEC | — | missing |
| COMP | — | missing |
| EGU0 | — | missing |
| EGU1 | — | missing |
| EGU2 | — | missing |
| EGU3 | — | missing |
| EGU4 | — | missing |
| EGU5 | — | missing |
| TIMER3 | nrf-timer |
modelled |
| TIMER4 | nrf-timer |
modelled |
| PWM0 | nrf-pwm |
modelled |
| PDM | — | missing |
| NVMC | nrf-nvmc |
modelled |
| PPI | nrf-ppi |
missing |
| MWU | — | missing |
| PWM1 | nrf-pwm |
modelled |
| PWM2 | nrf-pwm |
modelled |
| SPIM2 | nrf-spim |
modelled |
| RTC2 | nrf-rtc |
modelled |
| I2S | — | missing |
| FPU | storage |
registers only |
| USBD | nrf-usbd |
missing |
| UARTE1 | nrf-uart |
modelled |
| QSPI | nrf-qspi |
missing |
| PWM3 | nrf-pwm |
modelled |
| SPIM3 | nrf-spim |
modelled |
| P0 | nrf-gpio |
modelled |
| P1 | nrf-gpio |
modelled |
| CRYPTOCELL | — | missing |
Declared omissions: the debug monitor exception (DEMCR's MON_ bits), C_SNAPSTALL, the FPB's flash patching (FP_REMAP), the DWT's counters other than CYCCNT, PC sampling, data value matching and linked comparators, the trace pin: the ITM and TPIU are there (cortexm/itm.c) but no debug component gives a pin TRACESWO (the F1's DBGMCU_CR TRACE_IOEN, the nRF52840's TRACECONFIG are not modelled), so no SWO leaves the part; the ITM's timestamp and the DWT's packets; a halted core draws its sleep current; the radio; PPI and the DPPI-like EGUs; SPIS, TWIS, the legacy SPI and TWI, PDM, I2S, QDEC, COMP (plain registers); SPIM's and TWIM's EasyDMA lists, clock stretching by an I2C slave, arbitration; the SAADC's resistor ladders, its load on the circuit, noise and offset and gain errors; USBD; QSPI; the CryptoCell; the NVMC's word write (41 us) and ERASEALL (169 ms) times are the Product Specification's maxima as recalled, not checked against it (its page erase, 85 ms, is the value nrfx gives); the times' spread, nWRITE, a partially erased page's undefined contents, the ACLs, the hardware APPROTECT of build code F and later (APPROTECT.DISABLE; the UICR's APPROTECT is the earlier builds'), the debug port's WAIT, overrun detection and TRNCNT, the instruction cache's IHIT and IMISS, the UICR across a power cycle; POWER's sleep modes (System OFF); UARTE flow control and errors.
Boards: Raspberry Pi Pico (RP2040).
30 of 35 peripherals modelled, 5 registers only, 0 missing.
| Peripheral | Model | State |
|---|---|---|
| XIP_CTRL | storage |
registers only |
| SSI | rp2040-ssi |
modelled |
| SYSINFO | storage |
registers only |
| SYSCFG | storage |
registers only |
| CLOCKS | rp2040-clocks |
modelled |
| RESETS | rp2040-resets |
modelled |
| PSM | rp2040-psm |
modelled |
| IO_BANK0 | rp2040-io |
modelled |
| IO_QSPI | rp2040-pads |
modelled |
| PADS_BANK0 | rp2040-pads |
modelled |
| PADS_QSPI | rp2040-pads |
modelled |
| XOSC | rp2040-xosc |
modelled |
| PLL_SYS | rp2040-pll |
modelled |
| PLL_USB | rp2040-pll |
modelled |
| BUSCTRL | rp2040-busctrl |
modelled |
| UART0 | rp2040-uart |
modelled |
| UART1 | rp2040-uart |
modelled |
| SPI0 | rp2040-spi |
modelled |
| SPI1 | rp2040-spi |
modelled |
| I2C0 | rp2040-i2c |
modelled |
| I2C1 | rp2040-i2c |
modelled |
| ADC | rp2040-adc |
modelled |
| PWM | rp2040-pwm |
modelled |
| TIMER | rp2040-timer |
modelled |
| WATCHDOG | rp2040-watchdog |
modelled |
| RTC | rp2040-rtc |
modelled |
| ROSC | rp2040-rosc |
modelled |
| VREG_AND_CHIP_RESET | storage |
registers only |
| TBMAN | storage |
registers only |
| DMA | rp2040-dma |
modelled |
| USB_DPRAM | rp2040-usb |
modelled |
| USB | rp2040-usb |
modelled |
| PIO0 | rp2040-pio |
modelled |
| PIO1 | rp2040-pio |
modelled |
| SIO | rp2040-sio |
modelled |
Declared omissions: the debug monitor exception (DEMCR's MON_ bits), C_SNAPSTALL, the FPB's flash patching (FP_REMAP), the DWT's counters other than CYCCNT, PC sampling, data value matching and linked comparators, the ITM and TPIU (no SWO trace); a halted core draws its sleep current; the serial wire: every access completes at once (no WAIT), ORUNDETECT's data phase, TRNMODE's pushed compare and TRNCNT, JTAG (the ports are SWD only, as on the part), SYSCFG.DBGFORCE's bit-banged SWD from the cores and PROC_CONFIG's PROC0_HALTED and PROC1_HALTED; CSW's reset value is EmbSIM's (a word, no increment); the bootrom's code (EmbSIM's stand-in does what it does: boot2, the function and data tables, the USB boot); a debugger's choice of core (it sees the one that runs next); the XIP cache; USB host mode; DMA: the XIP streaming DREQs, the debug registers (CHn_DBG_CTDREQ, CHn_DBG_TCR: plain), the DREQ counters' exact behaviour against a peripheral whose request drops between two transfers; the PIOs: the input synchroniser's two cycles (inputs are read at once), OUT_STICKY and INLINE_OUT_EN, the debug registers (DBG_PADOUT and DBG_PADOE give the outputs), a delay on an EXEC'd instruction taken as on any other; SPI and I2C slave modes, TI's and Microwire's SPI formats, the SPI receive timeout, 10-bit I2C addresses, general call and START bytes, clock stretching by an I2C slave, arbitration, the I2C spike filter; PWM's gated and edge-counting DIVMODEs and phase advance; the ADC's error flags; the interpolators; DORMANT and SLEEP; the QSPI bank's pins; the USB boot's PICOBOOT interface (picotool), UF2 files for RAM, the activity LED; its serial number and INDEX.HTM's version argument are not the bootrom's; the USB controller's isochronous endpoints, suspend detection (no SOF for 3 ms) and remote wakeup, NAK and stall interrupts, data sequence errors; the flash's unique ID is EmbSIM's (45 6d 62 53 69 6d 00 01), not a part's; the RTC's RTC_ACTIVE follows RTC_ENABLE at once (the part takes a few clk_rtc edges), out-of-range times loaded are not checked.
Boards: HiFive1 Rev B (FE310-G002).
13 of 14 peripherals modelled, 0 registers only, 1 missing.
| Peripheral | Model | State |
|---|---|---|
| CLINT | fe310-clint |
modelled |
| PLIC | fe310-plic |
modelled |
| AON | fe310-aon |
modelled |
| PRCI | fe310-prci |
modelled |
| GPIO0 | fe310-gpio |
modelled |
| UART0 | fe310-uart |
modelled |
| UART1 | fe310-uart |
modelled |
| QSPI0 | fe310-spi |
modelled |
| SPI1 | fe310-spi |
modelled |
| SPI2 | fe310-spi |
modelled |
| PWM0 | fe310-pwm |
modelled |
| PWM1 | fe310-pwm |
modelled |
| PWM2 | fe310-pwm |
modelled |
| I2C0 | fe310-i2c |
missing |
Declared omissions: the mask ROM and the bootloader; the always-on domain's PMU (sleep, wake-up) and the low-frequency oscillator's trim: the low-frequency clock is 32.768 kHz; I2C; the instruction cache; the debug module: its space reads as zeros; QSPI0's programmed mode and the dual and quad protocols; the PWM comparators' shadow registers.
Boards: Blue Pill (STM32F103C8T6).
26 of 27 peripherals modelled, 0 registers only, 1 missing.
| Peripheral | Model | State |
|---|---|---|
| TIM2 | stm32-tim |
modelled |
| TIM3 | stm32-tim |
modelled |
| TIM4 | stm32-tim |
modelled |
| WWDG | stm32-wwdg |
modelled |
| IWDG | stm32-iwdg |
modelled |
| SPI2 | stm32-spi |
modelled |
| USART2 | stm32-usart |
modelled |
| USART3 | stm32-usart |
modelled |
| I2C1 | stm32-i2c |
modelled |
| I2C2 | stm32-i2c |
modelled |
| PWR | stm32-pwr |
modelled |
| AFIO | stm32f1-afio |
modelled |
| EXTI | stm32-exti |
modelled |
| GPIOA | stm32f1-gpio |
modelled |
| GPIOB | stm32f1-gpio |
modelled |
| GPIOC | stm32f1-gpio |
modelled |
| GPIOD | stm32f1-gpio |
modelled |
| GPIOE | stm32f1-gpio |
modelled |
| ADC1 | stm32f1-adc |
modelled |
| ADC2 | stm32f1-adc |
modelled |
| TIM1 | stm32-tim |
modelled |
| SPI1 | stm32-spi |
modelled |
| USART1 | stm32-usart |
modelled |
| DMA1 | — | missing |
| RCC | stm32-rcc |
modelled |
| FLASH | stm32f1-flash |
modelled |
| CRC | stm32-crc |
modelled |
Declared omissions: the debug monitor exception (DEMCR's MON_ bits), C_SNAPSTALL, the FPB's flash patching (FP_REMAP), the DWT's counters other than CYCCNT, PC sampling, data value matching and linked comparators, the trace pin: the ITM and TPIU are there (cortexm/itm.c) but no debug component gives a pin TRACESWO (the F1's DBGMCU_CR TRACE_IOEN, the nRF52840's TRACECONFIG are not modelled), so no SWO leaves the part; the ITM's timestamp and the DWT's packets; a halted core draws its sleep current; the ADC's injected group, analog watchdog, external triggers, dual mode and DMA; I2S; I2C's noise filtering, the SMBus's cumulative clock low extensions, clock synchronization between two masters; DMA; CAN; USB; RTC and backup domain; the timers' complementary outputs, break and ETR on pins (TIM1's CHxN, BKIN and ETR are not routed through AFIO), their DMA requests; the watchdogs' debug freeze bits and LSI's spread (40 kHz typical on the F1, 32 kHz here); the flash's read protection (RDPRT is loaded and reported, nothing refused), HSI having to run while it is written, the times' spread (DS5319's typical program time; its erase minimum, as it gives no typical), a reset during an operation; low-power modes beyond WFI.
Boards: NUCLEO-F446RE (STM32F446RE).
53 of 68 peripherals modelled, 0 registers only, 15 missing.
| Peripheral | Model | State |
|---|---|---|
| TIM2 | stm32-tim |
modelled |
| TIM3 | stm32-tim |
modelled |
| TIM4 | stm32-tim |
modelled |
| TIM5 | stm32-tim |
modelled |
| TIM6 | stm32-tim |
modelled |
| TIM7 | stm32-tim |
modelled |
| TIM12 | stm32-tim |
modelled |
| TIM13 | stm32-tim |
modelled |
| TIM14 | stm32-tim |
modelled |
| RTC | stm32f4-rtc |
modelled |
| WWDG | stm32-wwdg |
modelled |
| IWDG | stm32-iwdg |
modelled |
| SPI2 | stm32-spi |
modelled |
| SPI3 | stm32-spi |
modelled |
| SPDIF_RX | — | missing |
| USART2 | stm32-usart |
modelled |
| USART3 | stm32-usart |
modelled |
| UART4 | stm32-usart |
modelled |
| UART5 | stm32-usart |
modelled |
| I2C1 | stm32-i2c |
modelled |
| I2C2 | stm32-i2c |
modelled |
| I2C3 | stm32-i2c |
modelled |
| FMPI2C | — | missing |
| CAN1 | — | missing |
| CAN2 | — | missing |
| HDMI_CEC | — | missing |
| PWR | stm32f4-pwr |
modelled |
| DAC | stm32f4-dac |
modelled |
| TIM1 | stm32-tim |
modelled |
| TIM8 | stm32-tim |
modelled |
| USART1 | stm32-usart |
modelled |
| USART6 | stm32-usart |
modelled |
| ADC1 | stm32f4-adc |
modelled |
| ADC2 | stm32f4-adc |
modelled |
| ADC3 | stm32f4-adc |
modelled |
| C_ADC | stm32f4-adc-common |
modelled |
| SDIO | — | missing |
| SPI1 | stm32-spi |
modelled |
| SPI4 | stm32-spi |
modelled |
| SYSCFG | stm32f4-syscfg |
modelled |
| EXTI | stm32-exti |
modelled |
| TIM9 | stm32-tim |
modelled |
| TIM10 | stm32-tim |
modelled |
| TIM11 | stm32-tim |
modelled |
| SAI1 | — | missing |
| SAI2 | — | missing |
| GPIOA | stm32f4-gpio |
modelled |
| GPIOB | stm32f4-gpio |
modelled |
| GPIOC | stm32f4-gpio |
modelled |
| GPIOD | stm32f4-gpio |
modelled |
| GPIOE | stm32f4-gpio |
modelled |
| GPIOF | stm32f4-gpio |
modelled |
| GPIOG | stm32f4-gpio |
modelled |
| GPIOH | stm32f4-gpio |
modelled |
| CRC | stm32-crc |
modelled |
| RCC | stm32-rcc |
modelled |
| FLASH | stm32f4-flash |
modelled |
| DMA1 | stm32f4-dma |
modelled |
| DMA2 | stm32f4-dma |
modelled |
| OTG_HS_GLOBAL | — | missing |
| OTG_HS_HOST | — | missing |
| OTG_HS_DEVICE | — | missing |
| OTG_HS_PWRCLK | — | missing |
| OTGFS | stm32-otg-fs |
modelled |
| DCMI | — | missing |
| FMC | — | missing |
| QUADSPI | — | missing |
| DBG | stm32f4-dbgmcu |
modelled |
Declared omissions: DBGMCU's freeze bits for the RTC, the I2C SMBus time-outs and CAN (they run on while the core is halted); TRACE_IOEN and TRACE_MODE (no trace port); the debug monitor exception (DEMCR's MON_ bits), C_SNAPSTALL, the FPB's flash patching (FP_REMAP), the DWT's counters other than CYCCNT, PC sampling, data value matching and linked comparators, the ITM's timestamp, synchronisation and overflow packets and the DWT's packets (PC sampling, exception and data trace), the TPIU's parallel trace port and formatter (SWO is modelled: cortexm/itm.c); a halted core draws its sleep current; watchdogs: LSI's spread (32 kHz here), the debug freeze bits (a debugger's halt stops all of the machine's time); the WWDG's counter while WDGA is clear counts from the last access made while its clock is on; RTC: the reference clock detection (REFCKON, RTC_REFIN), RTC_AF2 (PI8, not bonded), the tamper input's precharge and pull-up, the 8 and 16 s calibration windows (the rate is applied evenly), RECALPF's wait; ADC: the start-up time after ADON (conversions are exact at once), the input's source impedance against the sampling time, the converter's offset, gain, linearity errors and noise (the code is the ideal one), the die's self-heating; DAC: the buffer's offset and gain errors and load regulation, the conversion's non-linearity; I2C: FLTR's analog and digital noise filters (the circuit's edges are taken as they come), the SMBus's cumulative clock low extensions (TLOW:SEXT, TLOW:MEXT), clock synchronization between two masters, TRISE's rise time compensation, CR2.FREQ (times come from the real PCLK1); FMPI2C1 (another IP) keeps its registers; SPI: I2S (I2SCFGR's I2SMOD keeps its value and the SPI stays an SPI; no catalog part speaks I2S), the TI slave's MISO release half a clock after the last bit (let go at the frame's end); DMA: the arbitration's delays between streams (a request is served at once), the direct mode and FIFO overrun/underrun errors (DMEIF never sets, FEIF only for the configuration error), the peripheral flow controller (PFCTRL), the bus matrix's timing (memory-to-memory moves an item every two cycles); dma_requests omits SAI2's and SPI4's requests; USART: noise detection (one sample a bit: NF never sets, ONEBIT changes nothing), smartcard mode (SCEN, NACK, GTPR) and IrDA (IREN, IRLP), which no catalog part speaks; timers: TIM5's TI4 on the RTC's wake-up interrupt (IT4_RMP 11) and TIM2's ITR1 on the OTG controllers' SOF, MSM's delay, the idle levels' dead time after a break, OCxFE; TIMx_CCy as an ADC trigger is OCyREF for an output channel and a pulse at a capture or a frozen channel's match; SysTick: STK_CALIB's TENMS (RM0390's value not taken: it reads 0 with SKEW set); GPIO: EVENTOUT (AF15, SEV's pulse), the I/O compensation cell's effect on the edges; SYSCFG: the FMC memories MEMRMP can map at 0 (none is on the bus), PMC's ADC DC2 bits' effect; EXTI: the internal lines' sources but the RTC's (the PVD, the USB OTG controllers' wake-ups) until their models land; SWIER triggers them; RCC: the clock security system's detection (CSSON is kept; the board's HSE never fails), a peripheral held in reset while its *RSTR bit stays set (its reset happens on the write), the brownout reset (BORRSTF only at power-on), the start-up times' spread between parts and with temperature and LSEMOD's drive level (the typical times always), MCO1 and MCO2 on their pins, and the I2S, SAI, SPDIF-RX, CEC and FMPI2C clocks from PLLI2S and PLLSAI (DCKCFGR, DCKCFGR2) beyond TIMPRE and the 48 MHz clock's CK48MSEL (PLL_Q or PLLSAI_P, which the USB OTG FS core needs); PWR: the regulator's settling times and the low-power modes' wake-up times (DS10693's low-power mode wake-up timings: the core runs at the wake-up event), the regulator's settings (LPDS, FPDS, LPLVDS, MRLVDS: the supply current is not modelled), the programmable voltage detector, DBG_STOP's clocks (with it set, a probe reaches the part in Stop, but HCLK is not kept running from HSI), the tamper and timestamp pin in Standby beyond RTC_OUT; DWT's CYCCNT counts through Stop; CAN, SDIO, QUADSPI, SAI, SPDIF-RX, HDMI-CEC, DCMI, FMC, FMPI2C and the USB OTG HS controller; USB OTG FS: the ID pin, SRP and HNP, split transactions through a hub, isochronous endpoints' frame parity and incomplete-transfer interrupts and a host's isochronous channels, FRMOR, LPM, GCCFG's battery-charging detection, the OTG_FS_WKUP interrupt through EXTI line 18, the SOF pulse on PA8; the device's turnaround inside a transaction (a transaction is whole), a host channel's OUT data kept per channel rather than in the shared FIFO's order (the words free are the same); GSNPSID reads 0x4F54320A (core 3.20a), the value TinyUSB's dwc2_info table measures on the F412's and F76x's OTG_FS, the same generation of the core (ST's HAL groups the F446 with the F412, F413 and F469); no ST document gives it and it was not read from an F446; flash: the times' spread and their maximum values (the typical ones always), the ART accelerator's cache hits during an operation (a program in the flash stalls whatever its cache holds), a program in SRAM whose interrupt handler is in the flash (it does not stall), the option bytes' programming time (OPTSTRT is done at once), a reset during an operation leaving the memory half-programmed, HCLK's 1 MHz minimum, the read protection's levels (RDP stored, no mass erase on a regression), PCROP's read refusal (RDERR), the ART accelerator's caches (DCRST, ICRST); CRC: the bus stall of a DR access while a word is computed (four AHB clocks), and a byte or halfword write to DR, which RM0390 does not allow, feeding its value zero-extended.
Boards: NUCLEO-F446ZE (STM32F446ZE).
53 of 68 peripherals modelled, 0 registers only, 15 missing.
| Peripheral | Model | State |
|---|---|---|
| TIM2 | stm32-tim |
modelled |
| TIM3 | stm32-tim |
modelled |
| TIM4 | stm32-tim |
modelled |
| TIM5 | stm32-tim |
modelled |
| TIM6 | stm32-tim |
modelled |
| TIM7 | stm32-tim |
modelled |
| TIM12 | stm32-tim |
modelled |
| TIM13 | stm32-tim |
modelled |
| TIM14 | stm32-tim |
modelled |
| RTC | stm32f4-rtc |
modelled |
| WWDG | stm32-wwdg |
modelled |
| IWDG | stm32-iwdg |
modelled |
| SPI2 | stm32-spi |
modelled |
| SPI3 | stm32-spi |
modelled |
| SPDIF_RX | — | missing |
| USART2 | stm32-usart |
modelled |
| USART3 | stm32-usart |
modelled |
| UART4 | stm32-usart |
modelled |
| UART5 | stm32-usart |
modelled |
| I2C1 | stm32-i2c |
modelled |
| I2C2 | stm32-i2c |
modelled |
| I2C3 | stm32-i2c |
modelled |
| FMPI2C | — | missing |
| CAN1 | — | missing |
| CAN2 | — | missing |
| HDMI_CEC | — | missing |
| PWR | stm32f4-pwr |
modelled |
| DAC | stm32f4-dac |
modelled |
| TIM1 | stm32-tim |
modelled |
| TIM8 | stm32-tim |
modelled |
| USART1 | stm32-usart |
modelled |
| USART6 | stm32-usart |
modelled |
| ADC1 | stm32f4-adc |
modelled |
| ADC2 | stm32f4-adc |
modelled |
| ADC3 | stm32f4-adc |
modelled |
| C_ADC | stm32f4-adc-common |
modelled |
| SDIO | — | missing |
| SPI1 | stm32-spi |
modelled |
| SPI4 | stm32-spi |
modelled |
| SYSCFG | stm32f4-syscfg |
modelled |
| EXTI | stm32-exti |
modelled |
| TIM9 | stm32-tim |
modelled |
| TIM10 | stm32-tim |
modelled |
| TIM11 | stm32-tim |
modelled |
| SAI1 | — | missing |
| SAI2 | — | missing |
| GPIOA | stm32f4-gpio |
modelled |
| GPIOB | stm32f4-gpio |
modelled |
| GPIOC | stm32f4-gpio |
modelled |
| GPIOD | stm32f4-gpio |
modelled |
| GPIOE | stm32f4-gpio |
modelled |
| GPIOF | stm32f4-gpio |
modelled |
| GPIOG | stm32f4-gpio |
modelled |
| GPIOH | stm32f4-gpio |
modelled |
| CRC | stm32-crc |
modelled |
| RCC | stm32-rcc |
modelled |
| FLASH | stm32f4-flash |
modelled |
| DMA1 | stm32f4-dma |
modelled |
| DMA2 | stm32f4-dma |
modelled |
| OTG_HS_GLOBAL | — | missing |
| OTG_HS_HOST | — | missing |
| OTG_HS_DEVICE | — | missing |
| OTG_HS_PWRCLK | — | missing |
| OTGFS | stm32-otg-fs |
modelled |
| DCMI | — | missing |
| FMC | — | missing |
| QUADSPI | — | missing |
| DBG | stm32f4-dbgmcu |
modelled |
Declared omissions: DBGMCU's freeze bits for the RTC, the I2C SMBus time-outs and CAN (they run on while the core is halted); TRACE_IOEN and TRACE_MODE (no trace port); the debug monitor exception (DEMCR's MON_ bits), C_SNAPSTALL, the FPB's flash patching (FP_REMAP), the DWT's counters other than CYCCNT, PC sampling, data value matching and linked comparators, the ITM's timestamp, synchronisation and overflow packets and the DWT's packets (PC sampling, exception and data trace), the TPIU's parallel trace port and formatter (SWO is modelled: cortexm/itm.c); a halted core draws its sleep current; watchdogs: LSI's spread (32 kHz here), the debug freeze bits (a debugger's halt stops all of the machine's time); the WWDG's counter while WDGA is clear counts from the last access made while its clock is on; RTC: the reference clock detection (REFCKON, RTC_REFIN), RTC_AF2 (PI8, not bonded), the tamper input's precharge and pull-up, the 8 and 16 s calibration windows (the rate is applied evenly), RECALPF's wait; ADC: the start-up time after ADON (conversions are exact at once), the input's source impedance against the sampling time, the converter's offset, gain, linearity errors and noise (the code is the ideal one), the die's self-heating; DAC: the buffer's offset and gain errors and load regulation, the conversion's non-linearity; I2C: FLTR's analog and digital noise filters (the circuit's edges are taken as they come), the SMBus's cumulative clock low extensions (TLOW:SEXT, TLOW:MEXT), clock synchronization between two masters, TRISE's rise time compensation, CR2.FREQ (times come from the real PCLK1); FMPI2C1 (another IP) keeps its registers; SPI: I2S (I2SCFGR's I2SMOD keeps its value and the SPI stays an SPI; no catalog part speaks I2S), the TI slave's MISO release half a clock after the last bit (let go at the frame's end); DMA: the arbitration's delays between streams (a request is served at once), the direct mode and FIFO overrun/underrun errors (DMEIF never sets, FEIF only for the configuration error), the peripheral flow controller (PFCTRL), the bus matrix's timing (memory-to-memory moves an item every two cycles); dma_requests omits SAI2's and SPI4's requests; USART: noise detection (one sample a bit: NF never sets, ONEBIT changes nothing), smartcard mode (SCEN, NACK, GTPR) and IrDA (IREN, IRLP), which no catalog part speaks; timers: TIM5's TI4 on the RTC's wake-up interrupt (IT4_RMP 11) and TIM2's ITR1 on the OTG controllers' SOF, MSM's delay, the idle levels' dead time after a break, OCxFE; TIMx_CCy as an ADC trigger is OCyREF for an output channel and a pulse at a capture or a frozen channel's match; SysTick: STK_CALIB's TENMS (RM0390's value not taken: it reads 0 with SKEW set); GPIO: EVENTOUT (AF15, SEV's pulse), the I/O compensation cell's effect on the edges; SYSCFG: the FMC memories MEMRMP can map at 0 (none is on the bus), PMC's ADC DC2 bits' effect; EXTI: the internal lines' sources but the RTC's (the PVD, the USB OTG controllers' wake-ups) until their models land; SWIER triggers them; RCC: the clock security system's detection (CSSON is kept; the board's HSE never fails), a peripheral held in reset while its *RSTR bit stays set (its reset happens on the write), the brownout reset (BORRSTF only at power-on), the start-up times' spread between parts and with temperature and LSEMOD's drive level (the typical times always), MCO1 and MCO2 on their pins, and the I2S, SAI, SPDIF-RX, CEC and FMPI2C clocks from PLLI2S and PLLSAI (DCKCFGR, DCKCFGR2) beyond TIMPRE and the 48 MHz clock's CK48MSEL (PLL_Q or PLLSAI_P, which the USB OTG FS core needs); PWR: the regulator's settling times and the low-power modes' wake-up times (DS10693's low-power mode wake-up timings: the core runs at the wake-up event), the regulator's settings (LPDS, FPDS, LPLVDS, MRLVDS: the supply current is not modelled), the programmable voltage detector, DBG_STOP's clocks (with it set, a probe reaches the part in Stop, but HCLK is not kept running from HSI), the tamper and timestamp pin in Standby beyond RTC_OUT; DWT's CYCCNT counts through Stop; CAN, SDIO, QUADSPI, SAI, SPDIF-RX, HDMI-CEC, DCMI, FMC, FMPI2C and the USB OTG HS controller; USB OTG FS: the ID pin, SRP and HNP, split transactions through a hub, isochronous endpoints' frame parity and incomplete-transfer interrupts and a host's isochronous channels, FRMOR, LPM, GCCFG's battery-charging detection, the OTG_FS_WKUP interrupt through EXTI line 18, the SOF pulse on PA8; the device's turnaround inside a transaction (a transaction is whole), a host channel's OUT data kept per channel rather than in the shared FIFO's order (the words free are the same); GSNPSID reads 0x4F54320A (core 3.20a), the value TinyUSB's dwc2_info table measures on the F412's and F76x's OTG_FS, the same generation of the core (ST's HAL groups the F446 with the F412, F413 and F469); no ST document gives it and it was not read from an F446; flash: the times' spread and their maximum values (the typical ones always), the ART accelerator's cache hits during an operation (a program in the flash stalls whatever its cache holds), a program in SRAM whose interrupt handler is in the flash (it does not stall), the option bytes' programming time (OPTSTRT is done at once), a reset during an operation leaving the memory half-programmed, HCLK's 1 MHz minimum, the read protection's levels (RDP stored, no mass erase on a regression), PCROP's read refusal (RDERR), the ART accelerator's caches (DCRST, ICRST); CRC: the bus stall of a DR access while a word is computed (four AHB clocks), and a byte or halfword write to DR, which RM0390 does not allow, feeding its value zero-extended.