From 22d091c2e80aa6e885099621c422c8263d44ccb6 Mon Sep 17 00:00:00 2001
From: ChuijkYahus <94828194+ChuijkYahus@users.noreply.github.com>
Date: Thu, 29 Oct 2026 22:46:00 +0800
Subject: [PATCH 1/4] ZPS create
---
.../zps/1.21/zps/doc/en_us/collisions.md | 38 ++
.../assets/zps/1.21/zps/doc/en_us/create.md | 63 ++
.../zps/1.21/zps/doc/en_us/executors.md | 100 +++
.../assets/zps/1.21/zps/doc/en_us/getters.md | 143 +++++
.../assets/zps/1.21/zps/doc/en_us/index.md | 62 ++
.../assets/zps/1.21/zps/doc/en_us/mappers.md | 220 +++++++
.../assets/zps/1.21/zps/doc/en_us/reactors.md | 89 +++
.../assets/zps/1.21/zps/doc/en_us/sable.md | 55 ++
.../assets/zps/1.21/zps/doc/en_us/syntax.md | 193 ++++++
.../zps/1.21/zps/doc/zh_cn/collisions.md | 33 +
.../assets/zps/1.21/zps/doc/zh_cn/create.md | 63 ++
.../zps/1.21/zps/doc/zh_cn/executors.md | 100 +++
.../assets/zps/1.21/zps/doc/zh_cn/getters.md | 143 +++++
.../assets/zps/1.21/zps/doc/zh_cn/index.md | 55 ++
.../assets/zps/1.21/zps/doc/zh_cn/mappers.md | 219 +++++++
.../assets/zps/1.21/zps/doc/zh_cn/reactors.md | 62 ++
.../assets/zps/1.21/zps/doc/zh_cn/sable.md | 55 ++
.../assets/zps/1.21/zps/doc/zh_cn/syntax.md | 191 ++++++
projects/assets/zps/1.21/zps/lang/en_us.json | 596 ++++++++++++++++++
projects/assets/zps/1.21/zps/lang/zh_cn.json | 596 ++++++++++++++++++
20 files changed, 3076 insertions(+)
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/collisions.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/create.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/executors.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/getters.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/index.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/mappers.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/reactors.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/sable.md
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/syntax.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/collisions.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/create.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/executors.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/index.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/sable.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md
create mode 100644 projects/assets/zps/1.21/zps/lang/en_us.json
create mode 100644 projects/assets/zps/1.21/zps/lang/zh_cn.json
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/collisions.md b/projects/assets/zps/1.21/zps/doc/en_us/collisions.md
new file mode 100644
index 000000000000..a6eb06a097de
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/collisions.md
@@ -0,0 +1,38 @@
+# Collisions
+
+There's an important limitation of the data system to be aware of: The cables can only carry one signal per tick.
+If you have more than one device outputting into the network at the same time, the signal will be scrambled into gibberish for all receivers.
+
+For example, if you have a serial bus on `get` mode and a script terminal outputting commands on the same network,
+they will collide and cause the gibberish output.
+
+However, there is a way around this problem. Using the **Data Comparator** or **Data Combinator** you can process multiple different signal inputs on the same tick.
+
+## Data Comparator
+
+The Data Comparator is a somewhat primitive form of combining network outputs.
+
+It takes in an input from both sides, and outputs redstone based on three modes: **Equal**, **Contains**, and **Greater Than**.
+_(You can change the mode by shift-right-clicking the Data Comparator with an empty hand.)_
+
+In the below example, the Data Comparator is set to "contains" mode, and the script terminal is reading its value using `redstone`.
+If the text in the book on the right (green) is contained within the book on the left (yellow), the script terminal (red) will read a redstone value `>0`.
+
+
+
+This is useful for simple comparisons between networks, but is limited by the fact it only outputs redstone.
+
+## Data Combinator
+
+The Data Combinator is a more advanced way of combining network outputs. It has two modes, **Append** and **Replace**.
+
+When in **Append** mode, it will output from the back the value from the left input (if any) with the input from the right (if any) added to the end.
+
+
+
+However this only works if you want to append directly to the end of a command. For a more precise combination,
+you can use the placeholder `%s` in the left input to specify where the right input should be inserted.
+
+_(Make sure to shift-right-click the combinator with an empty hand to switch to replace mode)_
+
+
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/create.md b/projects/assets/zps/1.21/zps/doc/en_us/create.md
new file mode 100644
index 000000000000..2d5875f7ea69
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/create.md
@@ -0,0 +1,63 @@
+# Create Integration
+
+When [Create](https://modrinth.com/mod/create) is loaded, ZPS adds extra executors for supported blocks in Create or Create addons.
+
+These executors allow automating behaviors in Create which usually require a player to tweak, such as speed, mode, range, or stack size.
+
+Use tab-completion in the Script Terminal to see which `set_*` commands are available for the block you are targeting. The list of options depends on which blocks are targeted and which Create addons are loaded.
+
+---
+
+## Common Commands
+
+| Executor | Argument | Description |
+|----------|----------|-------------|
+| `set_filter` | `- ` | Sets the item filter on supported Create blocks. |
+| `set_rpm` | `` | Sets a block's speed in RPM. |
+| `set_rotation_mode` | `` | Changes the mode used by a Mechanical Bearing. |
+| `set_clock_hand` | `` | Changes the hand arrangement of a Clockwork Bearing. |
+| `set_sticky_range` | `` | Sets how many sticky sides a chassis uses. |
+| `set_stack_size` | `` | Sets the ejected stack size of a Weighted Ejector. |
+
+Examples:
+
+```
+set_filter minecraft:iron_ingot
+set_rpm 64
+set_rotation_mode ROTATE
+set_sticky_range 4
+set_stack_size 16
+```
+
+---
+
+## Where They Apply
+
+Some commonly supported blocks include:
+
+- `set_filter`: Mechanical Saw, Deployer, Track Observer, Stockpile Switch, Item Hatch, Brass Funnel, Smart Fluid Pipe, Smart Observer, Smart Chute, Mechanical Roller, Basin
+- `set_rpm`: Creative Motor, Rotation Speed Controller
+- `set_rotation_mode`: Mechanical Bearing
+- `set_clock_hand`: Clockwork Bearing
+- `set_sticky_range`: Linear Chassis, Secondary Linear Chassis, Radial Chassis
+- `set_stack_size`: Weighted Ejector
+
+If a command does not appear in tab-completion for the current target block, that block does not support it.
+
+---
+
+## Using Create Commands in Scripts
+
+Create executors work like any other executor, so you can use literals, `value_of(...)`, and conditionals:
+
+```
+set_rpm value_of(redstone * 8)
+```
+
+```
+if redstone > 7 set_rotation_mode ROTATE_PLACE
+```
+
+```
+if block == create:weighted_ejector set_stack_size 16
+```
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/executors.md b/projects/assets/zps/1.21/zps/doc/en_us/executors.md
new file mode 100644
index 000000000000..bee97db9e54e
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/executors.md
@@ -0,0 +1,100 @@
+# Executors
+
+Executors perform an action on the target block. Each takes one argument, which can be a literal or a `value_of()` expression.
+
+Some executors are only available for specific block types. If the target block is not compatible, the executor is silently skipped.
+
+---
+
+## All Blocks
+
+Available on: any target block
+
+| Executor | Argument | Description |
+|----------------|----------|-------------------------------------------------|
+| `set_redstone` | `<0-15>` | Provides a redstone signal to the target block. |
+
+Examples:
+
+```
+set_redstone 15
+set_redstone value_of(get_page - 1)
+```
+
+---
+
+## Data Lectern / Lectern
+
+The following commands require the target block to be a `Data Lectern` or a regular `Lectern` with a book.
+
+| Executor | Argument | Description |
+|--------------|------------|----------------------------------------------------------------------|
+| `set_page` | `<1-100>` | Sets the current page of the book in the lectern. Pages are 1-based. |
+| `write_page` | `` | Writes text to the current page, replacing its existing content. |
+
+Examples:
+
+```
+set_page 1
+set_page value_of(redstone + 1)
+```
+
+```
+write_page "Hello, world!"
+write_page value_of(dimension as_string)
+```
+
+---
+
+## Radio Transmitter / Radio Receiver
+
+The following command requires the target block to be a `Radio Transmitter` or `Radio Receiver`.
+
+| Executor | Argument | Description |
+|-----------------|---------------|-----------------------------------------------|
+| `set_frequency` | `` | Sets the radio channel the block is tuned to (an integer from 1 to 64). |
+
+Example:
+
+```
+set_frequency 10
+```
+
+---
+
+## Robotic Arm
+
+The following commands require the target block to be a `Robotic Arm`.
+
+Unlike other executors, the argument is a **block position** (`x y z`) telling the arm which block to act on, not a value applied to the arm itself. The arm first swings its hand to that position, then performs the action. The target must be within 4 blocks of the arm; positions out of range are skipped. The arm can only accept commands that require it to move `once every 16 ticks`.
+
+| Executor | Argument | Description |
+|---------------|-----------|---------------------------------------------------------------------------------------------------|
+| `take_items` | `` | Pulls items from the inventory at the target position into the arm's hand. |
+| `put_items` | `` | Deposits the arm's held items into the inventory at the target position. |
+| `use` | `` | Right-clicks the target with the held item (place a block, fill/empty a bucket, use an item, ...). |
+| `shift_use` | `` | Sneak right-clicks the target with the held item. |
+| `drop_items` | `` | Drops held items into the world at the target position as item entities. |
+| `set_transfer_count` | `` | Sets the maximum stack size moved by `take_items`, `put_items`, and `drop_items` (1-64). |
+
+`take_items`, `put_items`, and `drop_items` move at most the **transfer amount** configured in the arm's GUI (1–64) per instruction; any remainder stays in the arm's hand. `use` and `shift_use` interact with the held item and do not transfer a quantity.
+
+Examples:
+
+```
+take_items 1 3 5
+put_items 0 1 2
+set_transfer_count 16
+drop_items 0 2 2
+```
+
+```
+use 0 1 2
+use value_of(pos offset_y 1)
+```
+
+---
+
+## Additional Executors
+
+- [Create](create.md) — auto-generated executors for Create mod blocks (`set_rpm`, `set_filter`, `set_rotation_mode`, ...)
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/getters.md b/projects/assets/zps/1.21/zps/doc/en_us/getters.md
new file mode 100644
index 000000000000..4adecb7a6d44
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/getters.md
@@ -0,0 +1,143 @@
+# Getters
+
+Getters retrieve a value from the world or context. They take no arguments and are always the first element in a condition or `value_of()` expression.
+
+Some getters are only available for specific block types.
+
+---
+
+## All Blocks
+
+Available on: any target block
+
+| Getter | Output | Description |
+|--------|--------|-------------|
+| `pos` | BlockPos | The position of the target block. |
+| `block` | BlockState | The block state at the target position. |
+| `dimension` | Dimension | The dimension the target block is in, as a dimension key such as `minecraft:overworld`. |
+| `redstone` | Int | The strongest redstone signal received by the target block from any neighbor. |
+
+Examples:
+
+```
+if pos == 0 64 0 set_redstone 15
+set_redstone value_of(pos x & 15)
+```
+
+```
+if block == minecraft:piston[facing=up] set_redstone 15
+```
+
+```
+if dimension == minecraft:the_nether set_redstone 15
+```
+
+```
+if redstone > 7 set_redstone 15 else set_redstone 0
+set_redstone value_of(redstone + 1)
+```
+
+---
+
+## Data Lectern / Lectern
+
+The following getters require the target block to be a `Data Lectern` or a vanilla `Lectern` with a book.
+
+| Getter | Output | Description |
+|--------|--------|-------------|
+| `get_page` | Int | The current page number of the book, 1-based. Returns `0` if there is no book. |
+| `read_page` | String | The text content of the current page. Returns an empty string if there is no book or the page is blank. |
+
+Examples:
+
+```
+if get_page > 3 set_redstone 15
+set_page value_of(get_page + 1)
+```
+
+```
+if read_page == "open" set_redstone 15
+write_page value_of(read_page + " (edited)")
+```
+
+---
+
+## Robotic Arm
+
+The following getter requires the target block to be a `Robotic Arm`.
+
+| Getter | Output | Description |
+|-------------|--------|----------------------------------------------------------------------------|
+| `held_item` | Item | The item currently held in the arm's hand. Returns an empty stack if the hand is empty. |
+| `transfer_count` | Int | The maximum stack size moved by `take_items`, `put_items`, and `drop_items`. |
+
+The resulting Item can be compared against an item predicate with `==`, or its stack size read with `count`.
+
+Examples:
+
+```
+if held_item == minecraft:lava_bucket use 6 1 4
+```
+
+```
+if held_item count > 0 put_items 0 1 2 else take_items 1 3 5
+```
+
+```
+if transfer_count < 16 set_transfer_count 16
+```
+
+---
+
+## Radio Transmitter / Radio Receiver
+
+The following getter requires the target block to be a `Radio Transmitter` or `Radio Receiver`.
+
+| Getter | Output | Description |
+|-------------|--------|-------------------------------------------------------------------|
+| `frequency` | Int | The radio channel the block is tuned to (an integer from 1 to 64). |
+
+Examples:
+
+```
+if frequency == 10 set_redstone 15
+set_frequency value_of(frequency + 1)
+```
+
+---
+
+## Power Cell
+
+The following getter requires the target block to be a `Power Cell` or `Creative Power Cell`.
+
+| Getter | Output | Description |
+|-----------------|--------|-----------------------------------------------------------------------------|
+| `stored_energy` | Int | The FE stored in the power cell structure. Every cell of a multiblock reads the same pooled total. A `Creative Power Cell` reads as the largest Int. |
+
+Examples:
+
+```
+if stored_energy < 100000 set_redstone 15 else set_redstone 0
+```
+
+---
+
+## Gas Gauge
+
+The following getter requires the target block to be a `Gas Gauge`.
+
+| Getter | Output | Description |
+|---------------|--------|-----------------------------------------------------------------------------|
+| `gauge_value` | Double | The reading the gauge's dial is set to show: pressure in Pascals or temperature in Kelvin. The value is not scaled or clamped to the dial's range. Changing the gauge's mode changes what this reads. |
+
+Examples:
+
+```
+if gauge_value > 8000000 set_redstone 15 else set_redstone 0
+```
+
+---
+
+## Additional Getters
+
+- [Sable](sable.md) — `sublevel`
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/index.md b/projects/assets/zps/1.21/zps/doc/en_us/index.md
new file mode 100644
index 000000000000..2b0f43e9d1e8
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/index.md
@@ -0,0 +1,62 @@
+# Basics
+
+The script terminal can be tricky to get your head around at first, but will get easier as you learn how the data networks work.
+
+The first important thing to know is that commands from the script terminal each run once for every serial bus connected.
+
+That means when you send
+`write_page "hello world"`
+from the terminal, it will go to all connected serial buses and evaluate separately at each one.
+
+
+
+Even serial buses that do not support a command (like the arm receiving `write_page`) will still receive it,
+they just won't act on it.
+
+In fact, it's best to picture the code running at each serial bus instead of at the script terminal.
+
+Getters like `pos` and `block` will hold the value computed at the serial bus being run.
+You can use this to filter commands to only act for one particular serial bus, like so:
+
+
+
+In the above example, the code is still running at every serial bus, but since only the left-most one passes the condition
+it will be the only one to act on the command following the `if`.
+
+_(Note: this example has the script terminal located at the world coordinates `0 0 0`. Your coordinates will probably differ)_
+
+Let's run through a concrete example. Say we have two arms as seen below, and want them to reach into their respective chests with `take_item`.
+
+We will use an address pad to label the arms as `@arm1` and `@arm2`, and the chests as `@chest1` and `@chest2` respectively.
+This is not required, but it will make our script easier to write.
+
+
+
+Let's start off with a naive (and incorrect) script and see what happens.
+
+_(Make sure your script terminal delay is set to 16t)_
+
+
+
+When we run it, we get this result:
+
+
+
+Clearly, this isn't correct. Both arms reached for the same chest!
+
+This is because both serial buses ran the code to reach for `@chest1`, and then both ran the code for `@chest2`.
+
+So, we fix the issue by filtering on the `pos` variable with our commands:
+
+
+
+This way, even though both arms are running the same code, they will stick to their respective commands.
+
+If we run the script, we find that it worked! The arms reached to their own chests:
+
+
+
+Understanding this (how serial buses each run individually and in parallel) is crucial to understanding the rest of the data system.
+Remember: the script terminal does not run anything*, it simply sends commands to all connected serial buses.
+
+_*Under some rare situations, the script terminal does run part of the script, but those situations will be covered later on_
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/mappers.md b/projects/assets/zps/1.21/zps/doc/en_us/mappers.md
new file mode 100644
index 000000000000..8206b1232f6a
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/mappers.md
@@ -0,0 +1,220 @@
+# Mappers
+
+Mappers always follow a getter or another mapper, and transform the previous value into a new value.
+They sometimes take an argument, which can be a literal or a `value_of()` expression.
+
+The available mappers depend on the type of the preceding value.
+
+---
+
+## BlockPos
+
+Produced by: `pos`, `string as_block_pos`, `vec_pos rounded_down`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `x` | Int | X coordinate |
+| `y` | Int | Y coordinate |
+| `z` | Int | Z coordinate |
+| `center` | Vec Pos | The centered floating-point position (`x + 0.5`, `y + 0.5`, `z + 0.5`) |
+| `offset_x ` | BlockPos | Returns a new position offset by the given amount on the X axis |
+| `offset_y ` | BlockPos | Returns a new position offset by the given amount on the Y axis |
+| `offset_z ` | BlockPos | Returns a new position offset by the given amount on the Z axis |
+| `offset ` | BlockPos | Returns a new position offset by the given coordinate components |
+| `== ` | Boolean | True if equal to the given position |
+| `as_string` | String | Formats as `"x y z"` |
+
+Examples:
+
+```
+if pos x > 0 set_redstone 15
+set_redstone value_of(pos y & 15)
+```
+
+---
+
+## BlockState
+
+Produced by: `block`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `== ` | Boolean | True if the block state matches the predicate (supports block properties) |
+
+Examples:
+
+```
+if block == minecraft:stone set_redstone 15
+if block == minecraft:piston[facing=up] set_redstone 15
+```
+
+---
+
+## Vec Pos
+
+A floating-point position. Produced by: `pos center`, `ship pos`, `sublevel pos`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `x` | Double | X component |
+| `y` | Double | Y component |
+| `z` | Double | Z component |
+| `distance_to ` | Double | Distance to the given position |
+| `direction_to ` | Vec Dir | Normalized direction vector toward the given position |
+| `rounded_down` | BlockPos | Rounds each component down to get a block position |
+
+Examples:
+
+```
+if ship pos distance_to 0 0 0 > 100 set_redstone 15
+```
+
+---
+
+## Vec Box
+
+A size vector (width, height, depth). Produced by: `ship bounding_box`, `sublevel bounding_box`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `x` | Double | Width |
+| `y` | Double | Height |
+| `z` | Double | Depth |
+| `volume` | Double | Total volume (x × y × z) |
+
+---
+
+## Vec Dir
+
+A direction vector. Produced by: `vec_pos direction_to`, `ship world_vel`, `ship local_vel`, `ship dir`, `sublevel world_vel`, `sublevel local_vel`, `sublevel dir`, `vec_dir normalize`, `vec_dir cross`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `x` | Double | X component |
+| `y` | Double | Y component |
+| `z` | Double | Z component |
+| `length` | Double | Magnitude of the vector |
+| `normalize` | Vec Dir | Unit vector in the same direction |
+| `cross ` | Vec Dir | Cross product with another direction |
+| `dot ` | Double | Dot product with another direction |
+
+---
+
+## Int
+
+Produced by: `pos x/y/z`, `redstone`, `get_page`, `double rounded_down/rounded_up`, `ship id`, `dimension index`, `string as_int`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `== ` | Boolean | Equality |
+| `> ` | Boolean | Greater than |
+| `< ` | Boolean | Less than |
+| `+ ` | Int | Addition |
+| `- ` | Int | Subtraction |
+| `% ` | Int | Modulo |
+| `& ` | Int | Bitwise AND |
+| `\| ` | Int | Bitwise OR |
+| `<< ` | Int | Left shift |
+| `>> ` | Int | Right shift |
+| `* ` | Double | Multiplication |
+| `/ ` | Double | Division |
+| `as_string` | String | Converts to string |
+
+Examples:
+
+```
+if redstone > 7 set_redstone 15
+set_redstone value_of(get_page - 1)
+set_redstone value_of(pos x & 15)
+```
+
+---
+
+## Double
+
+Produced by: `pos x/y/z` (Vec Pos), `vec_dir length/dot`, `vec_box volume`, `int * / `, `ship mass`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `== ` | Boolean | Equality |
+| `> ` | Boolean | Greater than |
+| `< ` | Boolean | Less than |
+| `+ ` | Double | Addition |
+| `- ` | Double | Subtraction |
+| `* ` | Double | Multiplication |
+| `/ ` | Double | Division |
+| `rounded_down` | Int | Floor |
+| `rounded_up` | Int | Ceiling |
+| `as_string` | String | Converts to string |
+
+---
+
+## String
+
+Produced by: `read_page`, `pos as_string`, `dimension as_string`, `int as_string`, `double as_string`, `boolean as_string`, `ship slug`, `sublevel name`, `sublevel id`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `== ` | Boolean | Equality |
+| `+ ` | String | Concatenation |
+| `<+ ` | String | Prepends the given string |
+| `lines` | Int | Splits by `\n` and returns the number of lines |
+| `get_line ` | String | Splits by `\n` and returns the line at that index, or `""` if out of bounds |
+| `remove_line ` | String | Splits by `\n` and removes the line at that index; unchanged if out of bounds |
+| `split ` | String | Replaces every occurrence of the given delimiter with `\n` |
+| `as_int` | Int | Parse as integer |
+| `as_double` | Double | Parse as double |
+| `as_block_pos` | BlockPos | Parse as `"x y z"` format |
+| `as_boolean` | Boolean | Parse `"true"` / `"false"` (case-insensitive) |
+| `as_dimension` | Dimension | Treat as a dimension key |
+
+Examples:
+
+```
+if read_page == "open" set_redstone 15
+write_page value_of(pos as_string)
+write_page value_of(pos as_string <+ "Pos: ")
+set_redstone value_of(read_page lines)
+write_page value_of(read_page remove_line 1)
+write_page value_of(read_page split ", ")
+```
+
+---
+
+## Boolean
+
+Produced by: any `==`, `>`, `<` comparison, `string as_boolean`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `&& ` | Boolean | Logical AND |
+| `\|\| ` | Boolean | Logical OR |
+| `as_string` | String | `"true"` or `"false"` |
+
+Examples:
+
+```
+if pos x > 0 && value_of(pos z > 0) set_redstone 15
+if read_page == "open" || value_of(redstone > 0) set_redstone 15
+write_page value_of(redstone > 7 as_string)
+if read_page as_boolean set_redstone 15
+```
+
+---
+
+## Dimension
+
+Produced by: `dimension`, `string as_dimension`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `== ` | Boolean | True if equal to the given dimension |
+| `index` | Int | A stable integer index for this dimension (consistent per server session) |
+| `as_string` | String | The dimension's resource location (e.g. `minecraft:overworld`) |
+
+Examples:
+
+```
+if dimension == minecraft:the_nether set_redstone 15
+set_redstone value_of(dimension index & 15)
+```
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/reactors.md b/projects/assets/zps/1.21/zps/doc/en_us/reactors.md
new file mode 100644
index 000000000000..3fa646d20a24
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/reactors.md
@@ -0,0 +1,89 @@
+# Reactors
+
+Fusion Reactors are a very powerful multiblock which can be used to generate large amounts of FE.
+
+However, they are also complex to set up and keep running.
+This page should help you learn how to start and run a healthy reactor.
+
+You can also ponder any block involved in reactor creation for a more visual tutorial on how to build one.
+
+For the purposes of this page, we will assume you've already built a basic reactor multiblock with all the ins and outs required.
+
+## Flux
+
+Fusion Reactors take in Flux gas, and convert it to Aether in a powerful reaction. This reaction also generates
+massive quantities of heat, which you can siphon off as Forge Energy.
+
+You'll need a steady supply of Flux to keep a reactor going.
+It can be obtained with a **Vaporizer** using Lithium nuggets and blue ice.
+_(Both of which can be automated)_
+
+## Starting the reaction
+
+The Flux will only react into Aether once the reactor temperature is above 50,000K. If you attach Step-Down transformers
+to the heat exchangers on your reactor, you can feed it FE to heat it up to the reaction temperature.
+If you attach Step-Up transformers to the heat exchangers, you can siphon off heat from the reactor to generate FE.
+
+Luckily, the transforms also include smart monitoring technology. That is to say they will only feed FE to the reactor
+if it is below 55,000K and they will only take FE from the reactor if it is above 55,000K. This means you can have
+both an input and an output of FE attached to your reactor at all times, and you don't have to worry about somehow
+enabling/disabling the transformers.
+
+## Monitoring the reaction
+
+Although the Forge Energy in/out will self regulate, the pressure and temperature of your reactor will not.
+Reactors can fail in a few ways, including:
+1. Melting down (internal heat surpasses **200,000K**)
+2. Bursting from pressure (internal pressure surpasses **24MPa**)
+3. Losing integrity (your friend "accidentally" breaks a wall)
+
+As you take FE out of the reactor, the heat level _will_ lower.
+However, if your system fills up on FE (e.g. your battery banks are full) the Heat Exchangers
+will _stop_ converting heat into FE and your reactor will begin heating up drastically, often leading to a meltdown.
+
+## Understanding the gasses
+
+As the Flux reacts into Aether, it will increase the pressure. However, Aether actually _inhibits_ the reaction.
+That is to say the more Aether in the reactor, the less the Flux will react.
+
+Although that makes Pressure mostly self-regulating, it's also a bad thing. Your reactor will get full of Aether and
+no longer be able to produce more heat. To deal with this, you need to handle pumping Aether _out_ of the reactor.
+
+## Tip #1
+
+To get a reactor started, you should leave the Aether trapped inside (aka disable the output port with a full redstone signal).
+Then you can let Flux flow in, and start heating it up with FE from your network.
+It's best to restrict the flow of Flux in at first, since its cheaper to heat up less gas and helps avoid bursting once the Flux heats up.
+
+Once it reaches 50,000K, the reaction can begin. It will heat up very quickly, but hopefully the Aether will build up fast
+enough to inhibit the reaction from going far enough to melt down.
+
+Once you've reached a stable, but dwindling (from too much Aether) reaction you can start letting the Aether out.
+You can send an analog (e.g. between 0 and 15) redstone signal to the output hatch to control its exit rate.
+You don't want it to exit too fast, but you also don't want it to exit too slow.
+
+## Tip #2
+
+You don't have to monitor your power network to see when you are full and shut down your reactor.
+Instead (using a script terminal), monitor the _temperature_ of your reactor.
+
+Since you know it will only heat up once the transformers stop siphoning power from the reactor,
+you know that excessive heat will only happen once the power network is full.
+
+When that happens, you don't have to shut down the reactor completely.
+Instead, close the Flux input and Aether output hatches completely (with a full redstone signal).
+The reaction will stop heating up, and instead very slowly cool down. It should be able to stay
+above reaction temperature (50,000K) for a long while.
+
+In the rare case it cools below 50,000K, you'll simply need to jumpstart the reactor again.
+This will potentially happen automatically, if your Step-Down transformers are still able to
+provide power to the reactor and your Flux/Aether flow is steady.
+
+## Tip #3
+
+Enjoy the process! Automating your reactor doesn't have to be a chore, it can be an interesting challenge.
+
+We won't provide a premade script to run a reactor, but we will say this:
+It is possible in less than 8 lines of script code. Give it a try!
+
+Don't accidentally overcomplicate it (unless that's your goal, each to their own).
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/sable.md b/projects/assets/zps/1.21/zps/doc/en_us/sable.md
new file mode 100644
index 000000000000..0cddd82faf12
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/sable.md
@@ -0,0 +1,55 @@
+# Sable Integration
+
+These values become meaningful when [Sable](https://github.com/ryanhcode/sable) is present.
+
+---
+
+## Getter
+
+| Getter | Output | Description |
+|--------|--------|-------------|
+| `sublevel` | SubLevel | Returns the sublevel containing the target block's position. If the target is not inside a sublevel, a sentinel value is returned. |
+
+---
+
+## Sublevel Mappers
+
+Produced by: `sublevel`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `name` | String | The sublevel's display name. Returns `""` if unnamed or not inside a sublevel. |
+| `id` | String | The sublevel UUID as a string. Returns `""` if not inside a sublevel. |
+| `pos` | Vec Pos | The sublevel pose position in global space. Returns the target block's own centered position if not inside a sublevel. |
+| `world_vel` | Vec Dir | The target block's global velocity, accounting for sublevel motion. Returns zero if not inside a sublevel. |
+| `local_vel` | Vec Dir | The target block's velocity rotated into the sublevel's local frame. Returns zero if not inside a sublevel. |
+| `bounding_box` | Vec Box | The sublevel bounding box dimensions in local space, in blocks. Does not change as the sublevel rotates. Returns zero if not inside a sublevel. |
+| `dir ` | Vec Dir | A cardinal direction (`north`, `south`, `east`, `west`, `up`, `down`) rotated to match the sublevel's current orientation. Returns the unrotated direction if not inside a sublevel. |
+
+---
+
+## Examples
+
+Check if the block is in a sublevel:
+
+```
+if sublevel id == "" set_redstone 0 else set_redstone 15
+```
+
+Set redstone based on upward sublevel motion:
+
+```
+if sublevel world_vel y > 0 set_redstone 15
+```
+
+Check which way the sublevel's north is pointing:
+
+```
+if sublevel dir north y < 0 set_redstone 15
+```
+
+Activate when the sublevel is large:
+
+```
+if sublevel bounding_box volume > 1000 set_redstone 15
+```
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/syntax.md b/projects/assets/zps/1.21/zps/doc/en_us/syntax.md
new file mode 100644
index 000000000000..2d9d759a3ce2
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/syntax.md
@@ -0,0 +1,193 @@
+# Syntax
+
+The Script Terminal lets you automate blocks using a simple, line-based scripting language.
+
+Each line is a command. When the terminal receives a redstone signal, it dispatches each command in order.
+
+---
+
+## How It Works
+
+Commands are built up of chainable parts:
+
+| Part | Purpose |
+| ---------- | ----------------------------------------------------------------------------- |
+| `Executor` | Performs an action on the target block. Always takes an argument. |
+| `Getter` | Reads a value from the world or target block. Never takes an argument. |
+| `Mapper` | Transforms the current value into another value. Sometimes takes an argument. |
+
+The simplest valid command is an executor with its associated argument:
+
+```
+set_redstone 15
+```
+
+Here `set_redstone` is the executor and `15` is its argument.
+
+---
+
+## Conditionals
+
+Use `if` or `unless` before an executor to make it conditional:
+
+```
+if
+unless
+```
+
+The `condition` is a getter → mapper chain that produces a Boolean value (`true` or `false`).
+
+- `if` runs the executor when the condition is `true`
+- `unless` runs the executor when the condition is `false`
+
+Example:
+
+```
+if redstone > 7 set_redstone 0
+```
+
+Here, `redstone > 7` is the condition.
+If it evaluates to `true`, the executor `set_redstone` runs with argument `0`.
+
+I.e. this command sets redstone to 0 only if the target block is receiving a signal strength of 8 or higher.
+
+---
+
+## Conditionals with alternatives
+
+Add `else` to provide an alternative if the condition fails:
+
+```
+if else
+unless else
+```
+
+- For `if`:
+ - If the condition is `true`, the first executor runs
+ - If the condition is `false`, the second executor runs
+
+- For `unless`:
+ - If the condition is `false`, the first executor runs
+ - If the condition is `true`, the second executor runs
+
+Example:
+
+```
+if redstone > 7 set_redstone 0 else set_redstone 15
+```
+
+Here, `redstone > 7` is the condition.
+
+- If it evaluates to `true`, `set_redstone 0` runs
+- If it evaluates to `false`, `set_redstone 15` runs
+
+This command sets redstone to 0 when the signal strength is 8 or higher, and 15 otherwise.
+
+---
+
+## Wait
+
+Use `wait ` to pause execution for a number of cycles:
+
+Example:
+
+```
+set_redstone 15
+wait 2
+set_redstone 0
+```
+
+`wait` behaves like an executor, but cannot be used with `if`, `unless`, or `else`.
+
+It always runs when reached, and delays the dispatch of following commands.
+
+---
+
+> The remaining concepts are more advanced and are not required to get started. It is recommended to become familiar
+> with the above material before continuing, and return to these topics as needed.
+
+---
+
+## Coordinate Types
+
+Arguments support Minecraft's relative (`~`) and local (`^`) coordinate syntax, resolved relative to the terminal's position.
+
+Examples
+
+```
+if pos == ~ ~1 ~ set_redstone 15
+if pos == ^3 ^ ^-12 set_redstone 0
+```
+
+The coordinates are resolved when the command is dispatched, not when it's executed.
+
+---
+
+## Addresses
+
+Typing out coordinates by hand is error-prone, especially when using many positions at once. The **Address Pad** lets you save block positions under memorable names and refer to them in scripts with a `@name` token.
+
+**Saving addresses** — hold an Address Pad and:
+
+- **Right-click a block** to save its position as a new address (up to 15 per pad).
+- **Right-click the air** to open a screen for renaming and removing saved addresses.
+
+Address names may contain letters, digits, `.`, and `_`.
+
+**Using addresses** — right-click a Script Terminal with the Address Pad to attach it. Once attached, any of its saved addresses can be used wherever a coordinate argument is expected, by writing `@` followed by the name:
+
+```
+take_items @input_chest
+put_items @furnace
+if block == minecraft:lava_cauldron use @bucket_dropoff
+```
+
+Each `@name` is substituted with the saved position's absolute `x y z` coordinates when the command is dispatched, exactly as if you had typed them out.
+
+> **Addresses only work from a Script Terminal with an attached Address Pad.** They are resolved by the terminal using its pad, so a `@name` token will *not* resolve from other command sources such as command blocks or chat — only literal coordinates and the `~` / `^` syntax work there.
+
+---
+
+## value_of()
+
+Use `value_of(...)` in place of a literal argument to compute a value at runtime:
+
+Example:
+
+```
+set_redstone value_of(pos y - 50)
+```
+
+The expression inside can be any getter → mapper chain, so long as it returns the required argument type.
+
+---
+
+## Expression Aliases
+
+Use `#def = ` at the top of a script to give a reusable name to a getter → mapper chain:
+
+```
+#def first_line = read_page get_line 1
+
+write_page value_of(first_line)
+```
+
+Alias names may contain letters, digits, and `_`, and cannot start with a digit.
+
+Declarations are read from the top of the script. Blank lines are ignored while reading declarations, and the first nonblank line that does not start with `#` ends the declaration section.
+
+Aliases may reference aliases declared earlier:
+
+```
+#def line_1 = read_page get_line 1
+#def line_2 = read_page get_line 2
+#def combined = line_2 + "\n" + value_of(line_1)
+
+write_page value_of(combined)
+```
+
+Later aliases with the same name replace earlier aliases for following declarations and commands.
+
+Alias bodies must start with a getter or an earlier alias, then may continue with mappers.
+
+---
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/collisions.md b/projects/assets/zps/1.21/zps/doc/zh_cn/collisions.md
new file mode 100644
index 000000000000..cfd9d3a0fa43
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/collisions.md
@@ -0,0 +1,33 @@
+# 碰撞
+
+数据系统有一个需要明白的重要局限:线缆一刻内只能承载一个信号。如果同一时间有多于一个设备在向网络送出信号,那么所有接收端收到的都只会是碰撞产生的噪声。
+
+例如,网络中同时有一个处于`获取`模式的串行总线和一台输出命令的脚本终端,它们就会产生碰撞,让输出变得杂乱不堪。
+
+不过,这个问题其实有解决方法。**数据比较器**和**数据组合器**可以用于在同一刻内处理多个不同的信号输入。
+
+## 数据比较器
+
+数据比较器是相对基础的网络输出组合方式。
+
+它会从两个侧面处取输入,并根据模式输出红石信号;模式有三种:**相等**、**包含**、**大于**。_(空手Shift右击数据比较器可切换频道。)_
+
+在下方示例中,数据比较器处于“包含”模式,脚本终端通过`redstone`读取其值。若左侧(黄色)书文本中包含了右侧(绿色)书的文本,脚本终端(红石)就会读取到`>0`的红石信号值。
+
+
+
+在简单比对网络时很有用,但由于它只输出红石信号,实际的功能性不多。
+
+## 数据组合器
+
+数据组合器是相对高级的网络输出组合方式。它有两个模式:**拼接**和**替换**。
+
+在**拼接**模式下,组合器会将右侧输入(若有)接在左侧输入(若有)末尾,并从后面输出结果。
+
+
+
+当然,这只对简单头尾拼接命令的情况有用。若需要更精确的组合控制,可以在左侧信号中使用`%s`占位符,指明应将右侧输入插入到哪里。
+
+_(确保空手Shift右击组合器切换至替换模式)_
+
+
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/create.md b/projects/assets/zps/1.21/zps/doc/zh_cn/create.md
new file mode 100644
index 000000000000..ffc557e3d833
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/create.md
@@ -0,0 +1,63 @@
+# 机械动力兼容
+
+安装有[机械动力](https://modrinth.com/mod/create)时,ZPS会为支持的机械动力方块和机械动力附属方块额外新增执行器。
+
+这些执行器可用于自动化原先需要玩家调整的机械动力指标,如转速、模式、范围、堆叠数量等。
+
+可在脚本终端中用Tab自动补全来查看目标方块可以使用哪些`set_*`命令。目标方块不同,加载的机械动力附属不同,命令列表的内容也不同。
+
+---
+
+## 常用命令
+
+| 执行器 | 参数 | 描述 |
+| --------------------------------------- | -------- | -------------------------------------- |
+| `set_filter` | `
- ` | 在支持的机械动力方块上设置物品过滤器。 |
+| `set_产生的rpm转速`/`set_目标的rpm转速` | `` | 设置方块的转速,以RPM计。 |
+| `set_运动模式` | `<模式>` | 改变动力轴承的模式。 |
+| `set_沿时钟指针排列` | `<模式>` | 改变时钟轴承的指针排列。 |
+| `set_粘附距离`/`set_粘附半径` | `` | 改变底盘的粘附距离/半径。 |
+| `set_弹射物品堆数量` | `` | 设置弹射置物台的弹射堆叠数量。 |
+
+例如:
+
+```
+set_filter minecraft:iron_ingot
+set_目标的rpm转速 64
+set_运动模式 ROTATE
+set_粘附距离 4
+set_弹射物品堆数量 16
+```
+
+---
+
+## 适用范围
+
+部分常见的受支持方块有:
+
+- `set_filter`:动力锯、机械手、列车侦测器、存量转信器、物品舱口、黄铜漏斗、智能流体管道、智能侦测器、智能溜槽、动力压路机、工作盆
+- `set_产生的rpm转速`/`set_目标的rpm转速`:创造马达、转速控制器
+- `set_运动模式`:动力轴承
+- `set_沿时钟指针排列`:时钟轴承
+- `set_粘附距离`/`set_粘附半径`:轴向底盘、轴向底盘二号、径向底盘
+- `set_弹射物品堆数量`:弹射置物台
+
+若某条命令未在目标方块的Tab自动补全中出现,就意味着该方块不支持该命令。
+
+---
+
+## 在脚本中使用机械动力命令
+
+机械动力执行器的使用方法和其他执行器的一致,也即可以使用字面量、`value_of(...)`、条件判断:
+
+```
+set_rpm value_of(redstone * 8)
+```
+
+```
+if redstone > 7 set_运动模式 ROTATE_PLACE
+```
+
+```
+if block == create:weighted_ejector set_弹射物品堆数量 16
+```
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md b/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md
new file mode 100644
index 000000000000..c8ed7f8dc3ff
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md
@@ -0,0 +1,100 @@
+# 执行器
+
+执行器(executor)会对目标方块执行动作。所有执行器都需接受一个参数,可以是字面量,也可以是`value_of()`表达式。
+
+部分执行器只有特定类型的方块可用。若目标方块与执行器不兼容,则只会跳过该执行器。
+
+---
+
+## 所有方块
+
+可用于:任意目标方块
+
+| 执行器 | 参数 | 描述 |
+| -------------- | -------- | ------------------------ |
+| `set_redstone` | `<0-15>` | 向目标方块通入红石信号。 |
+
+例如:
+
+```
+set_redstone 15
+set_redstone value_of(get_page - 1)
+```
+
+---
+
+## 数据讲台 / 讲台
+
+下方命令需要目标方块为放有书的`数据讲台`或普通`讲台`。
+
+| 执行器 | 参数 | 描述 |
+| ------------ | ---------- | ------------------------------------- |
+| `set_page` | `<1-100>` | 设置书当前翻开至哪一页。页码从1起始。 |
+| `write_page` | `` | 向当前页写入文本,替换已有内容。 |
+
+例如:
+
+```
+set_page 1
+set_page value_of(redstone + 1)
+```
+
+```
+write_page "Hello, world!"
+write_page value_of(dimension as_string)
+```
+
+---
+
+## 无线电发送器 / 无线电接收器
+
+下方命令需要目标方块为`无线电发送器`或`无线电接收器`。
+
+| 执行器 | 参数 | 描述 |
+| --------------- | -------- | ------------------------------------------- |
+| `set_frequency` | `<频道>` | 设置该方块所在的无线电频道(1到64的整数)。 |
+
+例如:
+
+```
+set_frequency 10
+```
+
+---
+
+## 机械臂
+
+下方命令需要目标方块为`机械臂`。
+
+和其他执行器不同,这些执行器需要**方块位置**(`x y z`)参数作为机械臂的目标位置,而不接受作用于机械臂本身的值。机械臂会先将手移至该位置,再执行动作。目标须在机械臂4格范围内,超出范围的位置会被跳过。机械臂`每16刻只接受一次`让其移动的机械臂。
+
+| 执行器 | 参数 | 描述 |
+| -------------------- | --------- | ----------------------------------------------------------------- |
+| `take_items` | `` | 从目标位置的容器中取出物品至机械手。 |
+| `put_items` | `` | 将机械手中的物品存入目标位置的容器。 |
+| `use` | `` | 用手持物品右击目标(放置方块、倒空/装填铁桶、使用物品等)。 |
+| `shift_use` | `` | 用手持物品潜行右击目标。 |
+| `drop_items` | `` | 在目标位置将手持物品丢出为物品实体。 |
+| `set_transfer_count` | `` | 设置`take_items`、`put_items`、`drop_items`移动的物品量(1-64)。 |
+
+每一条`take_items`、`put_items`、`drop_items`指令最多只能移动机械臂GUI中指定的**运输量**(1–64),剩余的部分留在机械手中。`use`和`shift_use`会用手持物品交互,不会运输物品。
+
+例如:
+
+```
+take_items 1 3 5
+put_items 0 1 2
+set_transfer_count 16
+drop_items 0 2 2
+```
+
+```
+use 0 1 2
+use value_of(pos offset_y 1)
+```
+
+---
+
+## 额外执行器
+
+- [机械动力](create.md):为机械动力方块自动生成的执行器(`set_rpm`、`set_filter`、`set_rotation_mode`……)
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md b/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
new file mode 100644
index 000000000000..1e910aca9e4c
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
@@ -0,0 +1,143 @@
+# 获取器
+
+获取器(getter)会从世界或执行上下文中获取值。它们不接受参数,且必定是条件和`value_of()`表达式中的首个元素。
+
+部分获取器只有特定类型的方块可用。
+
+---
+
+## 所有方块
+
+可用于:任意目标方块
+
+| 获取器 | 输出 | 描述 |
+| ----------- | ---------- | ------------------------------------------------------------- |
+| `pos` | BlockPos | 目标方块的位置。 |
+| `block` | BlockState | 目标方块的方块状态。 |
+| `dimension` | Dimension | 目标方块所在的维度,形式为形如`minecraft:overworld`的维度键。 |
+| `redstone` | Int | 目标方块从所有相邻位置处收到的红石信号中强度最强者。 |
+
+例如:
+
+```
+if pos == 0 64 0 set_redstone 15
+set_redstone value_of(pos x & 15)
+```
+
+```
+if block == minecraft:piston[facing=up] set_redstone 15
+```
+
+```
+if dimension == minecraft:the_nether set_redstone 15
+```
+
+```
+if redstone > 7 set_redstone 15 else set_redstone 0
+set_redstone value_of(redstone + 1)
+```
+
+---
+
+## 数据讲台 / 讲台
+
+下方获取器需要目标方块为放有书的`数据讲台`或原版`讲台`。
+
+| 获取器 | 输出 | 描述 |
+| ----------- | ------ | ------------------------------------------------------ |
+| `get_page` | Int | 书当前页的页码,从1起始。未放置书则返回`0`。 |
+| `read_page` | String | 当前页的文本内容。未放置书或当前页为空则返回空字符串。 |
+
+例如:
+
+```
+if get_page > 3 set_redstone 15
+set_page value_of(get_page + 1)
+```
+
+```
+if read_page == "打开" set_redstone 15
+write_page value_of(read_page + "(已编辑)")
+```
+
+---
+
+## 机械臂
+
+下方获取器需要目标方块为`机械臂`。
+
+| 获取器 | 输出 | 描述 |
+| ---------------- | ---- | ------------------------------------------------------------- |
+| `held_item` | Item | 机械手当前持有的物品。手中无物品则返回空堆叠。 |
+| `transfer_count` | Int | `take_items`、`put_items`、`drop_items`能移动的最大堆叠数量。 |
+
+所得的Item可用`==`与物品谓词比较,也可用`count`读取堆叠的数量。
+
+例如:
+
+```
+if held_item == minecraft:lava_bucket use 6 1 4
+```
+
+```
+if held_item count > 0 put_items 0 1 2 else take_items 1 3 5
+```
+
+```
+if transfer_count < 16 set_transfer_count 16
+```
+
+---
+
+## 无线电发射器 / 无线电接收器
+
+下方获取器需要目标方块为`无线电发射器`或`无线电接收器`。
+
+| 获取器 | 输出 | 描述 |
+| ----------- | ---- | --------------------------------------- |
+| `frequency` | Int | 该方块所在的无线电频道(1到64的整数)。 |
+
+例如:
+
+```
+if frequency == 10 set_redstone 15
+set_frequency value_of(frequency + 1)
+```
+
+---
+
+## 能量单元
+
+下方获取器需要目标方块为`能量单元`或`创造能量单元`。
+
+| 获取器 | 输出 | 描述 |
+| --------------- | ---- | -------------------------------------------------------------------------------------------------- |
+| `stored_energy` | Int | 能量单元结构中存有的FE量。多方块中的所有单元都会返回结构的总存量。`创造能量单元`会返回最大整数值。 |
+
+例如:
+
+```
+if stored_energy < 100000 set_redstone 15 else set_redstone 0
+```
+
+---
+
+## 气体仪表
+
+下方获取器需要目标方块为`气体仪表`。
+
+| 获取器 | 输出 | 描述 |
+| ------------- | ------ | ------------------------------------------------------------------------------------------------------------------------ |
+| `gauge_value` | Double | 仪表的读数:压力单位为帕斯卡,温度单位为开尔文。所得值不会缩放,也不会根据仪表数据范围截断。更改仪表模式会改变所读数据。 |
+
+例如:
+
+```
+if gauge_value > 8000000 set_redstone 15 else set_redstone 0
+```
+
+---
+
+## 额外获取器
+
+- [Sable](sable.md):`sublevel`
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/index.md b/projects/assets/zps/1.21/zps/doc/zh_cn/index.md
new file mode 100644
index 000000000000..8f8cdd7b790d
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/index.md
@@ -0,0 +1,55 @@
+# 基础
+
+刚开始接触时,脚本终端可能会让人有些摸不着头脑,不过随着你对数据网络工作原理的了解逐渐加深,它的用法也会变得越发清晰简明。
+
+要理解的第一个重要知识,是来自脚本终端的命令会在相连的所有串行总线上各运行一次。
+
+也就是说,从终端发出`write_page "hello world"`后,相连的所有串行总线都会各自运行该命令一次。
+
+
+
+即便串行总线不支持所给命令(如收到`write_page`的机械臂),它们也依然会收到命令,只是不会响应。
+
+实际上,比起思考终端送出了什么命令来说,考虑各串行总线执行了什么代码会更好。
+
+`pos`、`block`等获取器中的值取自运行命令的串行总线。可借此筛选命令,仅让某一个串行总线执行它,例如:
+
+
+
+在上方示例中,代码仍会在所有串行总线中运行,但只有最左侧的能通过条件判断,因此只有它能响应`if`后的命令。
+
+_(注意:该例中脚本终端位于世界坐标`0 0 0`处。你终端里的坐标大概率会和它不一样。)_
+
+再来看一个更具体的例子。有下图中的两个机械臂,需要用`take_item`让它们伸向各自的箱子。
+
+我们使用地址写字板将两个机械臂分别标记为`@arm1`和`@arm2`,再将两个箱子分别标记为`@chest1`和`@chest2`。这一步不必要,但有这一步会让脚本写起来更容易。
+
+
+
+首先用一条极其简单(而且有错误)的脚本试试看。
+
+_(确保将脚本终端的延迟设为16t)_
+
+
+
+运行后,实际的效果是:
+
+
+
+很明显有问题。两个机械臂伸向了同一个箱子!
+
+这是因为两个串行总线都运行了取`@chest1`的代码,随后又都运行了取`@chest2`的代码。
+
+我们可以用`pos`变量来筛选命令,修复这个问题:
+
+
+
+如此,即便两个机械臂运行的是同样的代码,它们也只会执行各自的命令。
+
+现在再运行,我们会发现机械臂正常运作了!它们会各自伸向各自的箱子:
+
+
+
+理解这一点(各串行总线独立并行运行)是理解数据系统剩余部分的关键。牢记:脚本终端不会运行任何东西*,它只是在向相连的所有串行总线发出命令。
+
+_* 在某些少见的情况下,脚本终端确实会运行一部分脚本;这些情况之后再进行介绍_
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md b/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
new file mode 100644
index 000000000000..5cd406a606af
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
@@ -0,0 +1,219 @@
+# 映射器
+
+映射器(mapper)必定跟随在获取器或其他映射器后方,会将先前值变换为新值。它们有时会接受一个参数,可以是字面量,也可以是`value_of()`表达式。
+
+可用映射器由先前值的类型决定。
+
+---
+
+## BlockPos
+
+获取自:`pos`、`string as_block_pos`、`vec_pos rounded_down`
+
+| 映射器 | 输出 | 描述 |
+| ---------------- | -------- | --------------------------------------------------- |
+| `x` | Int | X坐标 |
+| `y` | Int | Y坐标 |
+| `z` | Int | Z坐标 |
+| `center` | Vec Pos | 中央的浮点数位置(`x + 0.5`、`y + 0.5`、`z + 0.5`) |
+| `offset_x ` | BlockPos | 在X轴上偏移所给数后,返回所得位置 |
+| `offset_y ` | BlockPos | 在Y轴上偏移所给数后,返回所得位置 |
+| `offset_z ` | BlockPos | 在Z轴上偏移所给数后,返回所得位置 |
+| `offset <坐标>` | BlockPos | 根据所给坐标各分量偏移后,返回所得位置 |
+| `== <坐标>` | Boolean | 若等于所给位置,则返回True |
+| `as_string` | String | 格式化为`"x y z"` |
+
+例如:
+
+```
+if pos x > 0 set_redstone 15
+set_redstone value_of(pos y & 15)
+```
+
+---
+
+## BlockState
+
+获取自:`block`
+
+| 映射器 | 输出 | 描述 |
+| --------------- | ------- | ---------------------------------------------- |
+| `== <方块谓词>` | Boolean | 若方块状态匹配谓词(支持方块属性),则返回True |
+
+例如:
+
+```
+if block == minecraft:stone set_redstone 15
+if block == minecraft:piston[facing=up] set_redstone 15
+```
+
+---
+
+## Vec Pos
+
+浮点数位置。获取自:`pos center`、`ship pos`、`sublevel pos`
+
+| 映射器 | 输出 | 描述 |
+| --------------------- | -------- | ---------------------------- |
+| `x` | Double | X分量 |
+| `y` | Double | Y分量 |
+| `z` | Double | Z分量 |
+| `distance_to <坐标>` | Double | 与所给位置间的距离 |
+| `direction_to <坐标>` | Vec Dir | 指向所给位置的归一化方向向量 |
+| `rounded_down` | BlockPos | 向下取整各分量,得到方块位置 |
+
+例如:
+
+```
+if ship pos distance_to 0 0 0 > 100 set_redstone 15
+```
+
+---
+
+## Vec Box
+
+尺寸向量(宽、高、深)。获取自:`ship bounding_box`、`sublevel bounding_box`
+
+| 映射器 | 输出 | 描述 |
+| -------- | ------ | ------------------- |
+| `x` | Double | 宽度 |
+| `y` | Double | 高度 |
+| `z` | Double | 深度 |
+| `volume` | Double | 总体积(x × y × z) |
+
+---
+
+## Vec Dir
+
+方向向量。获取自:`vec_pos direction_to`、`ship world_vel`、`ship local_vel`、`ship dir`、`sublevel world_vel`、`sublevel local_vel`、`sublevel dir`、`vec_dir normalize`、`vec_dir cross`
+
+| 映射器 | 输出 | 描述 |
+| -------------- | ------- | ---------------------- |
+| `x` | Double | X分量 |
+| `y` | Double | Y分量 |
+| `z` | Double | Z分量 |
+| `length` | Double | 向量的长度 |
+| `normalize` | Vec Dir | 指向相同方向的单位向量 |
+| `cross <方向>` | Vec Dir | 与另一个方向的叉积 |
+| `dot <方向>` | Double | 与另一个方向的点积 |
+
+---
+
+## Int
+
+获取自:`pos x/y/z`、`redstone`、`get_page`、`double rounded_down/rounded_up`、`ship id`、`dimension index`、`string as_int`
+
+| 映射器 | 输出 | 描述 |
+| ------------ | ------- | ------------ |
+| `== ` | Boolean | 等于 |
+| `> ` | Boolean | 大于 |
+| `< ` | Boolean | 小于 |
+| `+ ` | Int | 加法 |
+| `- ` | Int | 减法 |
+| `% ` | Int | 取模 |
+| `& ` | Int | 按位与 |
+| `\| ` | Int | 按位或 |
+| `<< ` | Int | 左移 |
+| `>> ` | Int | 右移 |
+| `* ` | Double | 乘法 |
+| `/ ` | Double | 除法 |
+| `as_string` | String | 转换为字符串 |
+
+例如:
+
+```
+if redstone > 7 set_redstone 15
+set_redstone value_of(get_page - 1)
+set_redstone value_of(pos x & 15)
+```
+
+---
+
+## Double
+
+获取自:`pos x/y/z`(Vec Pos), `vec_dir length/dot`、`vec_box volume`、`int * / `、`ship mass`
+
+| 映射器 | 输出 | 描述 |
+| -------------- | ------- | ------------ |
+| `== ` | Boolean | 等于 |
+| `> ` | Boolean | 大于 |
+| `< ` | Boolean | 小于 |
+| `+ ` | Double | 加法 |
+| `- ` | Double | 减法 |
+| `* ` | Double | 乘法 |
+| `/ ` | Double | 除法 |
+| `rounded_down` | Int | 向下取整 |
+| `rounded_up` | Int | 向上取整 |
+| `as_string` | String | 转换为字符串 |
+
+---
+
+## String
+
+获取自:`read_page`、`pos as_string`、`dimension as_string`、`int as_string`、`double as_string`、`boolean as_string`、`ship slug`、`sublevel name`、`sublevel id`
+
+| 映射器 | 输出 | 描述 |
+| ------------------- | --------- | -------------------------------------------- |
+| `== ` | Boolean | 相等 |
+| `+ ` | String | 拼接至结尾 |
+| `<+ ` | String | 拼接至开头 |
+| `lines` | Int | 按`\n`分割,返回行数 |
+| `get_line ` | String | 按`\n`分割,返回所给索引处的行,越界返回`""` |
+| `remove_line ` | String | 按`\n`分割,移除所给索引处的行,越界不修改 |
+| `split ` | String | 将每一处所给分隔符替换为`\n` |
+| `as_int` | Int | 解析为整数 |
+| `as_double` | Double | 解析为双精度浮点数 |
+| `as_block_pos` | BlockPos | 按`"x y z"`格式解析 |
+| `as_boolean` | Boolean | 解析`"true"`/`"false"`(大小写不敏感) |
+| `as_dimension` | Dimension | 视作维度键 |
+
+例如:
+
+```
+if read_page == "打开" set_redstone 15
+write_page value_of(pos as_string)
+write_page value_of(pos as_string <+ "位置:")
+set_redstone value_of(read_page lines)
+write_page value_of(read_page remove_line 1)
+write_page value_of(read_page split ", ")
+```
+
+---
+
+## Boolean
+
+获取自:任意`==`、`>`、`<`比较,`string as_boolean`
+
+| 映射器 | 输出 | 描述 |
+| ---------------- | ------- | ------------------- |
+| `&& ` | Boolean | 逻辑与 |
+| `\|\| ` | Boolean | 逻辑或 |
+| `as_string` | String | `"true"`或`"false"` |
+
+例如:
+
+```
+if pos x > 0 && value_of(pos z > 0) set_redstone 15
+if read_page == "打开" || value_of(redstone > 0) set_redstone 15
+write_page value_of(redstone > 7 as_string)
+if read_page as_boolean set_redstone 15
+```
+
+---
+
+## Dimension
+
+获取自:`dimension`、`string as_dimension`
+
+| 映射器 | 输出 | 描述 |
+| ---------------- | ------- | -------------------------------------------- |
+| `== ` | Boolean | 若与所给维度相等,则返回True |
+| `index` | Int | 稳定的维度整数索引(各服务端会话中恒定不变) |
+| `as_string` | String | 维度的资源位置(如`minecraft:overworld`) |
+
+例如:
+
+```
+if dimension == minecraft:the_nether set_redstone 15
+set_redstone value_of(dimension index & 15)
+```
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md b/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
new file mode 100644
index 000000000000..b4d9a3df7254
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
@@ -0,0 +1,62 @@
+# 反应堆
+
+聚变反应堆是能产生大量FE的强大多方块结构。
+
+但它们的搭建和维持很复杂。本页面会教你如何启动和维持健康运转的反应堆。
+
+也可以思索反应堆相关方块,以查看更加视觉化的搭建教程。
+
+就本页面内容起见,我们假定你已经搭建了基础的反应堆多方块,并配好了各种组件。
+
+## 流气
+
+聚变反应堆需要流气输入,并会通过高能反应将其转化为以太。该反应也会产生极其大量的热,可供抽取为Forge能量。
+
+反应堆的持续运作需要稳定的流气供应。这种气体可在**汽化机**中通过锂粒和蓝冰获取。_(这两者都可自动化。)_
+
+## 启动反应
+
+流气只会在反应堆温度超过50,000K时反应为以太。在反应堆换热器处贴上降压变压器,即可供应FE以加热至反应温度。在换热器处贴上升压变压器,即可从反应堆中抽出热量以产出FE。
+
+好在变压器能够智能监控反应堆。也就是说,它们只会在反应堆温度低于55,000K时提供FE,且只会在反应堆温度高于55,000K时抽出FE。因此一直贴着FE输入端和输出端不会有影响,不必担心变压器的启停。
+
+## 监控反应
+
+Forge能量的输入输出会自行调控,反应堆的温度和压力却不会。反应堆有许多种失效场景,包括:
+1. 熔毁(内部热量超过**200,000K**)
+2. 因压力爆炸(内部压力超过**24MPa**)
+3. 完整性缺失(你的朋友“意外”破坏了仓壁)
+
+从反应堆抽出FE时,其中热量*会*减少。但假如你的机器里装满了FE(比如你的电池组都满了),换热器便*不会*再将热量转换为FE。此时你的反应堆会开始剧烈升温,通常会导致熔毁。
+
+## 理解气体
+
+随着流气反应形成以太,反应堆内部的压力也会上升。不过,以太其实会*抑制*反应。换言之,反应堆中的以太越多,流气就反应得越少。
+
+压力因此在大体上能自行调控,但该效应也有负面作用。反应堆会被以太塞满,无法再产出足量的热。为此,你需要将以太泵*出*反应堆。
+
+## 小贴士#1
+
+为启动反应堆,你应当先将以太留在仓室内(也即用最强的红石信号禁用输出端口)。随后再灌入流气,并通过网络提供FE加热。开始时最好能限制流气的注入速度;这是因为加热少量气体的消耗不大,也能借此避免流气升温导致压力过高爆炸。
+
+达到50,000K后反应就会启动。反应堆会极其迅速地升温;希望以太的累积速度足够快,快到能阻止反应堆失控熔毁。
+
+当反应达到稳定状态并逐渐减弱(因为以太过多)时,就可以排出以太了。可以向输出端口通入模拟(即在0到15之间)红石信号控制排出速率。排气的速率不应过快也不应过慢。
+
+## 小贴士#2
+
+无需以能量网络填满与否为依据启停反应堆。建议(使用脚本终端)监控反应堆的*温度*。
+
+由于反应堆只会因变压器不再抽取能量而升温,热量便只会在能量网络已满时过剩。
+
+出现这种情况时也不必完全关停反应堆,而是只需(使用最强的红石信号)完全关闭流气输入端口和以太输出端口。反应堆会停止升温,转而极为缓慢地降温,应当能在反应温度(50,000K)以上保持很长时间。
+
+在某些少见情景下反应堆会降至50,000K以下,此时再次启动反应堆即可。只要降压变压器仍能供能,且流气/以太供应稳定,反应堆就有一定可能自行重启。
+
+## 小贴士#3
+
+玩得愉快!不必把反应堆的自动化看成繁琐乏味的任务,它也可以是个有趣的挑战。
+
+在此我们不会给出预先写好的反应堆维护脚本,但我们可以说:所需脚本代码可以压缩到8行以下。试试看吧!
+
+别不小心搞得过于复杂了(除非你的目的就是这个,人各有志吧)。
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/sable.md b/projects/assets/zps/1.21/zps/doc/zh_cn/sable.md
new file mode 100644
index 000000000000..e6578fe63359
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/sable.md
@@ -0,0 +1,55 @@
+# Sable兼容
+
+这些值只在安装有[Sable](https://github.com/ryanhcode/sable)时有意义。
+
+---
+
+## 获取器
+
+| 获取器 | 输出 | 描述 |
+| ---------- | -------- | -------------------------------------------------------------------- |
+| `sublevel` | SubLevel | 返回包含目标方块位置的子维度。若目标不在子维度内,会返回一个哨兵值。 |
+
+---
+
+## 子维度映射器
+
+获取自:`sublevel`
+
+| 映射器 | 输出 | 描述 |
+| -------------- | ------- | -------------------------------------------------------------------------------------------------------------------- |
+| `name` | String | 子维度的显示名称。未命名或不在子维度内返回`""`。 |
+| `id` | String | 子维度的UUID字符串。不在子维度内返回`""`。 |
+| `pos` | Vec Pos | 全局空间中的子维度姿态位置。不在子维度内返回目标方块自身的中心位置。 |
+| `world_vel` | Vec Dir | 目标位置的全局速度,考虑子维度中的运动。不在子维度内返回零。 |
+| `local_vel` | Vec Dir | 旋转至子维度局部框架的目标方块速度。不在子维度内返回零。 |
+| `bounding_box` | Vec Box | 局部空间中的子维度边界框,单位为格。不会因子维度旋转而变。不在子维度内返回零。 |
+| `dir <方向>` | Vec Dir | 旋转至符合子维度当前朝向的正方向(`north`、`south`、`east`、`west`、`up`、`down`)。不在子维度内返回未经旋转的方向。 |
+
+---
+
+## 示例
+
+检验方块是否在子维度内:
+
+```
+if sublevel id == "" set_redstone 0 else set_redstone 15
+```
+
+根据子维度向上运动与否设置红石信号:
+
+```
+if sublevel world_vel y > 0 set_redstone 15
+```
+
+检验子维度中北方的指向:
+
+```
+if sublevel dir north y < 0 set_redstone 15
+```
+
+子维度足够大时激活:
+
+```
+if sublevel bounding_box volume > 1000 set_redstone 15
+```
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md b/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md
new file mode 100644
index 000000000000..5ea772584145
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md
@@ -0,0 +1,191 @@
+# 语法
+
+脚本终端可让你用基于行的简单脚本语言自动化方块。
+
+每一行都是一条命令。终端收到红石信号时,它就会按序发送每一条命令。
+
+---
+
+## 工作原理
+
+命令由下方的可链式使用的部件组成:
+
+| 部件 | 用途 |
+| -------- | ------------------------------------------ |
+| `执行器` | 对模板方块执行一个动作。必然接受一个参数。 |
+| `获取器` | 从世界或目标方块处读取一个值。不接受参数。 |
+| `映射器` | 将当前值变换为其他值。有时会接受一个参数。 |
+
+最简单的有效命令是带有相应参数的执行器:
+
+```
+set_redstone 15
+```
+
+其中,`set_redstone`是执行器,`15`是它的参数。
+
+---
+
+## 条件语句
+
+在执行器前使用`if`或`unless`可让它进行条件判断:
+
+```
+if <条件> <执行器>
+unless <条件> <执行器>
+```
+
+其中,`条件`是获取器→映射器链,最终会产出一个布尔值(`true`或`false`)。
+
+- `if`会在条件为`true`时运行执行器
+- `unless`会在条件为`false`时运行执行器
+
+例如:
+
+```
+if redstone > 7 set_redstone 0
+```
+
+其中,`redstone > 7`是条件。若它求值为`true`,执行器`set_redstone`便会以参数`0`运行。
+
+也即,该命令只会在收到强度为8及以上的红石信号时将红石信号设为0。
+
+---
+
+## 有备选项的条件语句
+
+`else`可在条件判断未通过时指定备选项:
+
+```
+if <条件> <执行器> else <执行器>
+unless <条件> <执行器> else <执行器>
+```
+
+- 对于`if`:
+ - 若条件为`true`,执行第一个执行器
+ - 若条件为`false`,执行第二个执行器
+
+- 对于`unless`:
+ - 若条件为`false`,执行第一个执行器
+ - 若条件为`true`,执行第二个执行器
+
+例如:
+
+```
+if redstone > 7 set_redstone 0 else set_redstone 15
+```
+
+其中,`redstone > 7`是条件。
+
+- 若它求值为`true`,运行`set_redstone 0`
+- 若它求值为`false`,运行`set_redstone 15`
+
+该命令会在信号强度在8及以上时将红石信号设为0,否则设为15。
+
+---
+
+## 等待
+
+可用`wait <周期数>`将执行延迟所给数个周期:
+
+例如:
+
+```
+set_redstone 15
+wait 2
+set_redstone 0
+```
+
+`wait`的表现和执行器一样,但无法在`if`、`unless`、`else`处使用。
+
+只要遇到该命令,就必定会执行,且会延迟后续命令的发送。
+
+---
+
+> 剩下的概念相对更高级,初入门时不需要了解。推荐在继续之前先熟悉上文内容,再按需查阅下文内容即可。
+
+---
+
+## 坐标类型
+
+参数支持Minecraft的相对(`~`)和局部(`^`)坐标语法,会以终端位置为基准解析。
+
+例如:
+
+```
+if pos == ~ ~1 ~ set_redstone 15
+if pos == ^3 ^ ^-12 set_redstone 0
+```
+
+坐标会在发送命令时解析,不会留到执行时才解析。
+
+---
+
+## 地址
+
+手工敲坐标很容易出错,同时使用多个坐标的时候尤其如此。**地址写字板**可使用方便记忆的名称保存方块位置,随后可在脚本中用`@名称`组件符引用。
+
+**保存地址**:拿起地址写字板并
+
+- **右击方块**将其位置保存为新地址(每个写字板最多15个)。
+- **右击空气**打开用于重命名和删除已保存地址的界面。
+
+地址名称中允许出现字母、数字、`.`、`_`。
+
+**使用地址**:用地址写字板右击脚本终端可将写字板放在终端上。放置后,终端即可在所有坐标参数处使用写字板中保存的地址,在名称前加`@`即可:
+
+```
+take_items @input_chest
+put_items @furnace
+if block == minecraft:lava_cauldron use @bucket_dropoff
+```
+
+终端会在发送命令时将各个`@名称`替换为相应位置的`x y z`绝对坐标,和你原本手工敲出的一样。
+
+> **地址仅在放有地址写字板的脚本终端中可用。**终端会用写字板解析它们,也即`@名称`组件符*不会*在命令方块、聊天栏等其他命令源中被解析——这些来源仅可使用字面坐标和`~`/`^`语法。
+
+---
+
+## value_of()
+
+在字面量参数处使用`value_of(...)`,可在运行时求值:
+
+例如:
+
+```
+set_redstone value_of(pos y - 50)
+```
+
+其中的表达式可为任意获取器→映射器链,只要它能返回所需类型的参数即可。
+
+---
+
+## 表达式别称
+
+在脚本顶部使用`#def <名称> = <表达式>`,可为获取器→映射器链指定可重用的名称:
+
+```
+#def first_line = read_page get_line 1
+
+write_page value_of(first_line)
+```
+
+别称中允许出现字母、数字、`_`,开头不得为数字。
+
+声明会从脚本顶部读取。读取声明时忽略空白行,脚本声明区会在第一个不以`#`开头的非空白行处结束。
+
+别称中可以使用之前声明的别称:
+
+```
+#def line_1 = read_page get_line 1
+#def line_2 = read_page get_line 2
+#def combined = line_2 + "\n" + value_of(line_1)
+
+write_page value_of(combined)
+```
+
+若出现同名别称,则后定义的覆盖先定义的;之后的声明和命令中再使用该别称,均会解析为后定义的。
+
+别称声明体必须以获取器或之前定义的别称起始,这之后才可接上映射器。
+
+---
diff --git a/projects/assets/zps/1.21/zps/lang/en_us.json b/projects/assets/zps/1.21/zps/lang/en_us.json
new file mode 100644
index 000000000000..fe15859c7642
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/lang/en_us.json
@@ -0,0 +1,596 @@
+{
+ "block.zps.cable": "Cable",
+ "block.zps.dense_cables": "Dense Cables",
+ "block.zps.dense_cable_separator": "Dense Cable Separator",
+ "block.zps.dense_cable_bend": "Dense Cable Bend",
+ "block.zps.stepup_transformer": "Step-Up Transformer",
+ "block.zps.stepdown_transformer": "Step-Down Transformer",
+ "block.zps.redstone_converter": "Redstone Converter",
+ "block.zps.creative_power_cell": "Creative Power Cell",
+ "block.zps.creative_power_cell.zps_tooltip": "An infinite source of [FE], only obtainable in Creative Mode.",
+ "block.zps.power_cell": "Power Cell",
+ "block.zps.beam_collector": "Beam Collector",
+ "block.zps.coal_burner": "Combustion Generator",
+ "block.zps.rolling_mill": "Rolling Mill",
+ "block.zps.assembler": "Assembler",
+ "block.zps.impact_piston": "Impact Piston",
+ "block.zps.composter_dirt": "Dirt-Filled Composter",
+ "block.zps.sieve": "Sieve",
+ "block.zps.vaporizer": "Vaporizer",
+ "gui.zps.vaporizer.temperature": "Machine temperature: %s",
+ "gui.zps.vaporizer.status.idle": "Idle: nothing to vaporize",
+ "gui.zps.vaporizer.status.heating": "Heating to %s",
+ "gui.zps.vaporizer.status.no_power": "No power: needs %s",
+ "gui.zps.vaporizer.status.vaporizing": "Vaporizing",
+ "gui.zps.vaporizer.status.output_full": "Gas buffer full",
+ "gui.zps.vaporizer.gas_buffer": "Gas buffer",
+ "gui.zps.vaporizer.gas_empty": "Empty",
+ "gui.zps.vaporizer.gas_line": "%s: %s",
+ "gui.zps.vaporizer.gas_temperature": "Temperature: %s",
+ "gui.zps.vaporizer.gas_pressure": "Pressure: %s",
+ "jei.zps.vaporizing.temperature_cost": "Temperature Cost: %s K",
+ "block.zps.vent": "Vent",
+ "block.zps.gas_gauge": "Gas Gauge",
+ "gui.zps.gas_gauge.mode": "Reading %s",
+ "gui.zps.gas_gauge.reading": "%s: %s",
+ "gui.zps.gas_gauge.mode.pressure": "Pressure",
+ "gui.zps.gas_gauge.mode.temperature": "Temperature",
+ "block.zps.gas_duct": "Gas Duct",
+ "block.zps.creative_gas_generator": "Creative Gas Generator",
+ "block.zps.creative_gas_generator.zps_tooltip": "An infinite source of [Gas], only obtainable in Creative Mode.",
+ "block.zps.reinforced_plating": "Reinforced Plating",
+ "block.zps.reinforced_glass": "Reinforced Glass",
+ "block.zps.reactor_port": "Reactor Port",
+ "block.zps.heat_exchanger": "Heat Exchanger",
+ "gui.zps.reactor_port.mode": "Direction",
+ "gui.zps.reactor_port.mode.input": "Input",
+ "gui.zps.reactor_port.mode.output": "Output",
+ "gui.zps.reactor_port.filter": "Blocked gases",
+ "gui.zps.reactor_port.filter.count": "%s of %s",
+ "gui.zps.reactor_port.filter.search": "Search gases...",
+ "gui.zps.reactor_port.filter.no_matches": "No matching gases",
+ "gui.zps.reactor_port.filter.unregistered": "Not registered",
+ "gui.zps.reactor_port.filter.limit": "Blocked gas limit reached",
+ "gui.zps.reactor_port.filter.narration.blocked": "%s, blocked",
+ "gui.zps.reactor_port.filter.narration.passing": "%s, passing",
+ "gui.zps.reactor_port.no_gases": "No gases registered",
+ "gui.zps.reactor_port.no_port": "No port here",
+ "advancement.zps.reactor_ignited.title": "Star in a Box",
+ "advancement.zps.reactor_ignited.description": "Heat a fusion reactor to ignition temperature.",
+ "advancement.zps.reactor_meltdown.title": "Containment Failure",
+ "advancement.zps.reactor_meltdown.description": "Melt a hole in a running fusion reactor.",
+ "block.zps.suspicious_red_sand": "Suspicious Red Sand",
+ "gui.zps.assembler.input": "Input",
+ "gui.zps.assembler.crafting": "Crafting Pattern",
+ "gui.zps.assembler.tag_ingredient": "Accepts any item in:",
+ "gui.zps.jei.shaped_5x5": "5x5 Crafting",
+ "gui.zps.jei.impact": "Impact Piston",
+ "gui.zps.jei.impact.may_contain": "May contain:",
+ "gui.zps.jei.impact.requires_state": "Requires %s: %s",
+ "gui.zps.jei.transfer_unsupported": "The Assembler can't lay out this recipe.",
+ "block.zps.octo_controller": "Octo-Controller",
+ "block.zps.dodeca_controller": "Dodeca-Controller",
+ "block.zps.switch_panel": "Switch Panel",
+ "block.zps.graduated_lever": "Graduated Lever",
+ "block.zps.cable_insulation": "Cable Insulation",
+ "block.zps.data_cable": "Data Cable",
+ "block.zps.data_lectern": "Data Lectern",
+ "block.zps.text_display": "Text Display",
+ "block.zps.data_transcriber": "Data Transcriber",
+ "block.zps.radio_transmitter": "Radio Transmitter",
+ "block.zps.radio_receiver": "Radio Receiver",
+ "block.zps.radio_antenna": "Radio Antenna",
+ "block.zps.data_comparator": "Data Comparator",
+ "block.zps.data_combinator": "Data Combinator",
+ "block.zps.serial_bus": "Serial Bus",
+ "gui.zps.serial_bus.mode": "Mode",
+ "gui.zps.serial_bus.mode.execute": "Execute",
+ "gui.zps.serial_bus.mode.get": "Get",
+ "gui.zps.serial_bus.last_command": "Last command",
+ "gui.zps.serial_bus.no_command": "No command has been received yet",
+ "gui.zps.serial_bus.evaluating": "While evaluating",
+ "gui.zps.serial_bus.expression": "Value to send",
+ "gui.zps.serial_bus.expression_hint": "Getter and mappers, e.g. pos as_string",
+ "gui.zps.serial_bus.no_bus": "No serial bus here",
+ "block.zps.script_terminal": "Script Terminal",
+ "block.zps.loudspeaker": "Loudspeaker",
+ "block.zps.robotic_arm": "Robotic Arm",
+ "block.zps.incomplete_robotic_arm_0": "Incomplete Robotic Arm",
+ "block.zps.incomplete_robotic_arm_1": "Incomplete Robotic Arm",
+ "block.zps.incomplete_robotic_arm_2": "Incomplete Robotic Arm",
+ "block.zps.bauxite": "Bauxite",
+ "block.zps.bauxite.zps_tooltip": "A source of [Aluminum].\n\nFound underground between [Y32] and [Y128], most commonly near [Y80].",
+ "block.zps.lithium_ore": "Lithium Ore",
+ "block.zps.lithium_ore.zps_tooltip": "A source of [Lithium].\n\nGenerates anywhere above [Y0].",
+ "block.zps.deepslate_lithium_ore": "Deepslate Lithium Ore",
+ "block.zps.deepslate_lithium_ore.zps_tooltip": "A source of [Lithium].\n\nGenerates anywhere below [Y0].",
+ "block.zps.aluminum_block": "Aluminum Block",
+ "block.zps.aluminum_plating": "Aluminum Plating",
+ "block.zps.aluminum_plating_stairs": "Aluminum Plating Stairs",
+ "block.zps.aluminum_plating_slab": "Aluminum Plating Slab",
+ "block.zps.aluminum_plating_wall": "Aluminum Plating Wall",
+ "block.zps.lithium_block": "Lithium Block",
+ "block.zps.raw_lithium_block": "Block of Raw Lithium",
+ "block.zps.space_truss": "Space Truss",
+ "block.zps.space_scaffold": "Space Scaffold",
+ "block.zps.space_mesh_block": "Space Mesh Block",
+ "block.zps.space_grating_block": "Space Grating Block",
+ "block.zps.catwalk": "Catwalk",
+ "block.zps.catwalk_stairs": "Catwalk Stairs",
+ "block.zps.small_industrial_light": "Small Industrial Light",
+ "block.zps.industrial_light": "Industrial Light",
+ "block.zps.large_industrial_light": "Large Industrial Light",
+ "block.zps.caution_block": "Caution Block",
+ "block.zps.radiation_caution_block": "Radiation Caution Block",
+ "block.zps.void_caution_block": "Void Caution Block",
+ "block.zps.space_plating": "Space Plating",
+ "block.zps.space_plating_stairs": "Space Plating Stairs",
+ "block.zps.space_plating_slab": "Space Plating Slab",
+ "block.zps.space_plating_wall": "Space Plating Wall",
+ "block.zps.riveted_space_plating": "Riveted Space Plating",
+ "block.zps.riveted_space_plating_stairs": "Riveted Space Plating Stairs",
+ "block.zps.riveted_space_plating_slab": "Riveted Space Plating Slab",
+ "block.zps.riveted_space_plating_wall": "Riveted Space Plating Wall",
+ "block.zps.red_space_plating": "Red Space Plating",
+ "block.zps.red_space_plating_stairs": "Red Space Plating Stairs",
+ "block.zps.red_space_plating_slab": "Red Space Plating Slab",
+ "block.zps.red_space_plating_wall": "Red Space Plating Wall",
+ "block.zps.orange_space_plating": "Orange Space Plating",
+ "block.zps.orange_space_plating_stairs": "Orange Space Plating Stairs",
+ "block.zps.orange_space_plating_slab": "Orange Space Plating Slab",
+ "block.zps.orange_space_plating_wall": "Orange Space Plating Wall",
+ "block.zps.yellow_space_plating": "Yellow Space Plating",
+ "block.zps.yellow_space_plating_stairs": "Yellow Space Plating Stairs",
+ "block.zps.yellow_space_plating_slab": "Yellow Space Plating Slab",
+ "block.zps.yellow_space_plating_wall": "Yellow Space Plating Wall",
+ "block.zps.green_space_plating": "Green Space Plating",
+ "block.zps.green_space_plating_stairs": "Green Space Plating Stairs",
+ "block.zps.green_space_plating_slab": "Green Space Plating Slab",
+ "block.zps.green_space_plating_wall": "Green Space Plating Wall",
+ "block.zps.lime_space_plating": "Lime Space Plating",
+ "block.zps.lime_space_plating_stairs": "Lime Space Plating Stairs",
+ "block.zps.lime_space_plating_slab": "Lime Space Plating Slab",
+ "block.zps.lime_space_plating_wall": "Lime Space Plating Wall",
+ "block.zps.cyan_space_plating": "Cyan Space Plating",
+ "block.zps.cyan_space_plating_stairs": "Cyan Space Plating Stairs",
+ "block.zps.cyan_space_plating_slab": "Cyan Space Plating Slab",
+ "block.zps.cyan_space_plating_wall": "Cyan Space Plating Wall",
+ "block.zps.blue_space_plating": "Blue Space Plating",
+ "block.zps.blue_space_plating_stairs": "Blue Space Plating Stairs",
+ "block.zps.blue_space_plating_slab": "Blue Space Plating Slab",
+ "block.zps.blue_space_plating_wall": "Blue Space Plating Wall",
+ "block.zps.light_blue_space_plating": "Light Blue Space Plating",
+ "block.zps.light_blue_space_plating_stairs": "Light Blue Space Plating Stairs",
+ "block.zps.light_blue_space_plating_slab": "Light Blue Space Plating Slab",
+ "block.zps.light_blue_space_plating_wall": "Light Blue Space Plating Wall",
+ "block.zps.purple_space_plating": "Purple Space Plating",
+ "block.zps.purple_space_plating_stairs": "Purple Space Plating Stairs",
+ "block.zps.purple_space_plating_slab": "Purple Space Plating Slab",
+ "block.zps.purple_space_plating_wall": "Purple Space Plating Wall",
+ "block.zps.magenta_space_plating": "Magenta Space Plating",
+ "block.zps.magenta_space_plating_stairs": "Magenta Space Plating Stairs",
+ "block.zps.magenta_space_plating_slab": "Magenta Space Plating Slab",
+ "block.zps.magenta_space_plating_wall": "Magenta Space Plating Wall",
+ "block.zps.pink_space_plating": "Pink Space Plating",
+ "block.zps.pink_space_plating_stairs": "Pink Space Plating Stairs",
+ "block.zps.pink_space_plating_slab": "Pink Space Plating Slab",
+ "block.zps.pink_space_plating_wall": "Pink Space Plating Wall",
+ "block.zps.brown_space_plating": "Brown Space Plating",
+ "block.zps.brown_space_plating_stairs": "Brown Space Plating Stairs",
+ "block.zps.brown_space_plating_slab": "Brown Space Plating Slab",
+ "block.zps.brown_space_plating_wall": "Brown Space Plating Wall",
+ "block.zps.black_space_plating": "Black Space Plating",
+ "block.zps.black_space_plating_stairs": "Black Space Plating Stairs",
+ "block.zps.black_space_plating_slab": "Black Space Plating Slab",
+ "block.zps.black_space_plating_wall": "Black Space Plating Wall",
+ "block.zps.gray_space_plating": "Gray Space Plating",
+ "block.zps.gray_space_plating_stairs": "Gray Space Plating Stairs",
+ "block.zps.gray_space_plating_slab": "Gray Space Plating Slab",
+ "block.zps.gray_space_plating_wall": "Gray Space Plating Wall",
+ "block.zps.light_gray_space_plating": "Light Gray Space Plating",
+ "block.zps.light_gray_space_plating_stairs": "Light Gray Space Plating Stairs",
+ "block.zps.light_gray_space_plating_slab": "Light Gray Space Plating Slab",
+ "block.zps.light_gray_space_plating_wall": "Light Gray Space Plating Wall",
+ "block.zps.chrome_space_plating": "Chrome Space Plating",
+ "block.zps.chrome_space_plating_stairs": "Chrome Space Plating Stairs",
+ "block.zps.chrome_space_plating_slab": "Chrome Space Plating Slab",
+ "block.zps.chrome_space_plating_wall": "Chrome Space Plating Wall",
+ "block.zps.agate_space_plating": "Agate Space Plating",
+ "block.zps.agate_space_plating_stairs": "Agate Space Plating Stairs",
+ "block.zps.agate_space_plating_slab": "Agate Space Plating Slab",
+ "block.zps.agate_space_plating_wall": "Agate Space Plating Wall",
+
+ "item.zps.cable": "Cable",
+ "item.zps.dense_cables": "Dense Cables",
+ "item.zps.dense_cable_separator": "Dense Cable Separator",
+ "item.zps.dense_cable_bend": "Dense Cable Bend",
+ "item.zps.stepup_transformer": "Step-Up Transformer",
+ "item.zps.stepdown_transformer": "Step-Down Transformer",
+ "item.zps.redstone_converter": "Redstone Converter",
+ "item.zps.creative_power_cell": "Creative Power Cell",
+ "item.zps.power_cell": "Power Cell",
+ "item.zps.beam_collector": "Beam Collector",
+ "item.zps.coal_burner": "Combustion Generator",
+ "item.zps.energy_storage_module": "Energy Storage Module",
+ "item.zps.power_drill": "Power Drill",
+ "item.zps.power_drill.energy": "Stored Energy: %s / %s FE",
+ "item.zps.chainsaw": "Chainsaw",
+ "item.zps.chainsaw.energy": "Stored Energy: %s / %s FE",
+ "item.zps.octo_controller": "Octo-Controller",
+ "item.zps.dodeca_controller": "Dodeca-Controller",
+ "item.zps.switch_panel": "Switch Panel",
+ "item.zps.graduated_lever": "Graduated Lever",
+ "item.zps.cable_insulation": "Cable Insulation",
+ "item.zps.data_cable": "Data Cable",
+ "item.zps.data_lectern": "Data Lectern",
+ "item.zps.text_display": "Text Display",
+ "item.zps.radio_transmitter": "Radio Transmitter",
+ "item.zps.radio_receiver": "Radio Receiver",
+ "item.zps.radio_antenna": "Radio Antenna",
+ "item.zps.data_comparator": "Data Comparator",
+ "item.zps.data_combinator": "Data Combinator",
+ "item.zps.serial_bus": "Serial Bus",
+ "item.zps.script_terminal": "Script Terminal",
+ "item.zps.data_transcriber": "Data Transcriber",
+ "item.zps.loudspeaker": "Loudspeaker",
+ "item.zps.robotic_arm": "Robotic Arm",
+ "item.zps.incomplete_robotic_arm_0": "Incomplete Robotic Arm",
+ "item.zps.incomplete_robotic_arm_1": "Incomplete Robotic Arm",
+ "item.zps.incomplete_robotic_arm_2": "Incomplete Robotic Arm",
+ "item.zps.incomplete_robotic_arm.segments": "%s/3 Arm Segments",
+ "item.zps.robotic_arm_segment": "Robotic Arm Segment",
+ "item.zps.bauxite": "Bauxite",
+ "item.zps.lithium_ore": "Lithium Ore",
+ "item.zps.deepslate_lithium_ore": "Deepslate Lithium Ore",
+ "item.zps.aluminum_ingot": "Aluminum Ingot",
+ "item.zps.aluminum_nugget": "Aluminum Nugget",
+ "item.zps.copper_nugget": "Copper Nugget",
+ "item.zps.aluminum_block": "Aluminum Block",
+ "item.zps.raw_lithium": "Raw Lithium",
+ "item.zps.lithium_ingot": "Lithium Ingot",
+ "item.zps.lithium_nugget": "Lithium Nugget",
+ "item.zps.lithium_block": "Lithium Block",
+ "item.zps.raw_lithium_block": "Block of Raw Lithium",
+ "item.zps.space_metal_ingot": "Space Metal Ingot",
+ "item.zps.space_metal_plate": "Space Metal Plate",
+ "item.zps.space_metal_mesh": "Space Metal Mesh",
+ "item.zps.space_metal_rod": "Space Metal Rod",
+ "item.zps.space_metal_pipe": "Space Metal Pipe",
+ "item.zps.space_metal_screw": "Space Metal Screw",
+ "item.zps.space_metal_bolt": "Space Metal Bolt",
+ "item.zps.space_metal_spring": "Space Metal Spring",
+ "item.zps.capacitor": "Capacitor",
+ "item.zps.transistor": "Transistor",
+ "item.zps.modulator": "Modulator",
+ "item.zps.copper_magnetron": "Copper Magnetron",
+ "item.zps.gold_magnetron": "Gold Magnetron",
+ "item.zps.copper_wire": "Copper Wire",
+ "item.zps.aluminum_wire": "Aluminum Wire",
+ "item.zps.gold_wire": "Gold Wire",
+ "item.zps.verdite_wire": "Verdite Wire",
+ "item.zps.empty_spool": "Empty Spool",
+ "item.zps.copper_spool": "Copper Spool",
+ "item.zps.gold_spool": "Gold Spool",
+ "item.zps.verdite_spool": "Verdite Spool",
+ "item.zps.address_pad": "Address Pad",
+ "item.zps.script_book": "Script Commands Manual",
+ "item.zps.space_truss": "Space Truss",
+ "item.zps.space_scaffold": "Space Scaffold",
+ "item.zps.space_mesh_block": "Space Mesh Block",
+ "item.zps.space_grating_block": "Space Grating Block",
+ "item.zps.catwalk": "Catwalk",
+ "item.zps.catwalk_stairs": "Catwalk Stairs",
+ "item.zps.small_industrial_light": "Small Industrial Light",
+ "item.zps.industrial_light": "Industrial Light",
+ "item.zps.large_industrial_light": "Large Industrial Light",
+ "item.zps.caution_block": "Caution Block",
+ "item.zps.radiation_caution_block": "Radiation Caution Block",
+ "item.zps.void_caution_block": "Void Caution Block",
+ "item.zps.space_plating": "Space Plating",
+ "item.zps.space_plating_stairs": "Space Plating Stairs",
+ "item.zps.space_plating_slab": "Space Plating Slab",
+ "item.zps.space_plating_wall": "Space Plating Wall",
+ "item.zps.riveted_space_plating": "Riveted Space Plating",
+ "item.zps.riveted_space_plating_stairs": "Riveted Space Plating Stairs",
+ "item.zps.riveted_space_plating_slab": "Riveted Space Plating Slab",
+ "item.zps.riveted_space_plating_wall": "Riveted Space Plating Wall",
+ "item.zps.red_space_plating": "Red Space Plating",
+ "item.zps.red_space_plating_stairs": "Red Space Plating Stairs",
+ "item.zps.red_space_plating_slab": "Red Space Plating Slab",
+ "item.zps.red_space_plating_wall": "Red Space Plating Wall",
+ "item.zps.orange_space_plating": "Orange Space Plating",
+ "item.zps.orange_space_plating_stairs": "Orange Space Plating Stairs",
+ "item.zps.orange_space_plating_slab": "Orange Space Plating Slab",
+ "item.zps.orange_space_plating_wall": "Orange Space Plating Wall",
+ "item.zps.yellow_space_plating": "Yellow Space Plating",
+ "item.zps.yellow_space_plating_stairs": "Yellow Space Plating Stairs",
+ "item.zps.yellow_space_plating_slab": "Yellow Space Plating Slab",
+ "item.zps.yellow_space_plating_wall": "Yellow Space Plating Wall",
+ "item.zps.green_space_plating": "Green Space Plating",
+ "item.zps.green_space_plating_stairs": "Green Space Plating Stairs",
+ "item.zps.green_space_plating_slab": "Green Space Plating Slab",
+ "item.zps.green_space_plating_wall": "Green Space Plating Wall",
+ "item.zps.lime_space_plating": "Lime Space Plating",
+ "item.zps.lime_space_plating_stairs": "Lime Space Plating Stairs",
+ "item.zps.lime_space_plating_slab": "Lime Space Plating Slab",
+ "item.zps.lime_space_plating_wall": "Lime Space Plating Wall",
+ "item.zps.cyan_space_plating": "Cyan Space Plating",
+ "item.zps.cyan_space_plating_stairs": "Cyan Space Plating Stairs",
+ "item.zps.cyan_space_plating_slab": "Cyan Space Plating Slab",
+ "item.zps.cyan_space_plating_wall": "Cyan Space Plating Wall",
+ "item.zps.blue_space_plating": "Blue Space Plating",
+ "item.zps.blue_space_plating_stairs": "Blue Space Plating Stairs",
+ "item.zps.blue_space_plating_slab": "Blue Space Plating Slab",
+ "item.zps.blue_space_plating_wall": "Blue Space Plating Wall",
+ "item.zps.light_blue_space_plating": "Light Blue Space Plating",
+ "item.zps.light_blue_space_plating_stairs": "Light Blue Space Plating Stairs",
+ "item.zps.light_blue_space_plating_slab": "Light Blue Space Plating Slab",
+ "item.zps.light_blue_space_plating_wall": "Light Blue Space Plating Wall",
+ "item.zps.purple_space_plating": "Purple Space Plating",
+ "item.zps.purple_space_plating_stairs": "Purple Space Plating Stairs",
+ "item.zps.purple_space_plating_slab": "Purple Space Plating Slab",
+ "item.zps.purple_space_plating_wall": "Purple Space Plating Wall",
+ "item.zps.magenta_space_plating": "Magenta Space Plating",
+ "item.zps.magenta_space_plating_stairs": "Magenta Space Plating Stairs",
+ "item.zps.magenta_space_plating_slab": "Magenta Space Plating Slab",
+ "item.zps.magenta_space_plating_wall": "Magenta Space Plating Wall",
+ "item.zps.pink_space_plating": "Pink Space Plating",
+ "item.zps.pink_space_plating_stairs": "Pink Space Plating Stairs",
+ "item.zps.pink_space_plating_slab": "Pink Space Plating Slab",
+ "item.zps.pink_space_plating_wall": "Pink Space Plating Wall",
+ "item.zps.brown_space_plating": "Brown Space Plating",
+ "item.zps.brown_space_plating_stairs": "Brown Space Plating Stairs",
+ "item.zps.brown_space_plating_slab": "Brown Space Plating Slab",
+ "item.zps.brown_space_plating_wall": "Brown Space Plating Wall",
+ "item.zps.black_space_plating": "Black Space Plating",
+ "item.zps.black_space_plating_stairs": "Black Space Plating Stairs",
+ "item.zps.black_space_plating_slab": "Black Space Plating Slab",
+ "item.zps.black_space_plating_wall": "Black Space Plating Wall",
+ "item.zps.gray_space_plating": "Gray Space Plating",
+ "item.zps.gray_space_plating_stairs": "Gray Space Plating Stairs",
+ "item.zps.gray_space_plating_slab": "Gray Space Plating Slab",
+ "item.zps.gray_space_plating_wall": "Gray Space Plating Wall",
+ "item.zps.light_gray_space_plating": "Light Gray Space Plating",
+ "item.zps.light_gray_space_plating_stairs": "Light Gray Space Plating Stairs",
+ "item.zps.light_gray_space_plating_slab": "Light Gray Space Plating Slab",
+ "item.zps.light_gray_space_plating_wall": "Light Gray Space Plating Wall",
+ "item.zps.chrome_space_plating": "Chrome Space Plating",
+ "item.zps.chrome_space_plating_stairs": "Chrome Space Plating Stairs",
+ "item.zps.chrome_space_plating_slab": "Chrome Space Plating Slab",
+ "item.zps.chrome_space_plating_wall": "Chrome Space Plating Wall",
+ "item.zps.agate_space_plating": "Agate Space Plating",
+ "item.zps.agate_space_plating_stairs": "Agate Space Plating Stairs",
+ "item.zps.agate_space_plating_slab": "Agate Space Plating Slab",
+ "item.zps.agate_space_plating_wall": "Agate Space Plating Wall",
+ "item.zps.redstone_wand": "Redstone Wand",
+ "zps.manual.group.networks": "Data Networks",
+ "zps.manual.group.language": "Script Language",
+ "zps.manual.group.integrations": "Integrations",
+ "zps.manual.group.gameplay": "Gameplay",
+ "zps.manual.syntax": "Syntax",
+ "zps.manual.executors": "Executors",
+ "zps.manual.getters": "Getters",
+ "zps.manual.mappers": "Mappers",
+ "zps.manual.basics": "Basics",
+ "zps.manual.collisions": "Collisions",
+ "zps.manual.reactors": "Reactors",
+ "zps.manual.create": "Create",
+ "zps.manual.sable": "Sable",
+ "zps.manual.valkyrien_skies": "Valkyrien Skies",
+ "zps.screen.open_manual": "Open Script Commands Manual",
+
+ "painting.zps.quasar.title": "Quasar",
+ "painting.zps.quasar.author": "PacificCyan",
+
+ "creativetab.zps_tab": "Zero Point Systems",
+
+ "key.zps.a": "Channel A",
+ "key.zps.b": "Channel B",
+ "key.zps.c": "Channel C",
+ "key.zps.d": "Channel D",
+ "key.zps.e": "Channel E",
+ "key.zps.f": "Channel F",
+ "key.zps.g": "Channel G",
+ "key.zps.h": "Channel H",
+ "key.zps.i": "Channel I",
+ "key.zps.j": "Channel J",
+ "key.zps.k": "Channel K",
+ "key.zps.l": "Channel L",
+ "key.categories.zps": "Zero Point Systems",
+
+
+ "zps.ponder.cable.header": "Cables",
+ "zps.ponder.cable.text_1": "Cables don't do anything on their own.",
+ "zps.ponder.cable.text_2": "Add Redstone Converters to send a redstone signal.",
+
+ "zps.ponder.energy.header": "Energy Cables",
+ "zps.ponder.energy.text_1": "Stepup Transformers draw FE from their adjacent block...",
+ "zps.ponder.energy.text_2": "...and deposit the FE to connected Stepdown Transformers.",
+
+ "zps.ponder.energy_explode.header": "Overvolting a Converter",
+ "zps.ponder.energy_explode.text_1": "Be careful not to supply FE to a Redstone Converter...",
+ "zps.ponder.energy_explode.text_2": "Redstone Converters cannot handle the higher voltage, and will explode.",
+
+ "zps.ponder.insulation.header": "Cable Insulation",
+ "zps.ponder.insulation.text_1": "Bare cables will always connect, and sometimes this is not wanted.",
+ "zps.ponder.insulation.text_2": "Apply Insulation to prevent cable blocks from making new connections.",
+
+ "zps.ponder.dense_cables.header": "Dense Cables",
+ "zps.ponder.dense_cables.text_1": "Tight spaces can be tricky.",
+ "zps.ponder.dense_cables.text_2": "Dense Cables can transmit 4 signals through a single block.",
+ "zps.ponder.dense_cables.text_3": "Use Dense Cable Separators to merge multiple regular cables into a Dense Cable.",
+ "zps.ponder.dense_cables.text_4": "Dense Cable Separators can be rotated with Shift + R-Click",
+ "zps.ponder.dense_cables.text_5": "This changes the signal routing.",
+
+ "zps.ponder.octo_controller.header": "Octo-Controller",
+ "zps.ponder.octo_controller.text_1": "Interact with an Octo-Controller to control it.",
+ "zps.ponder.octo_controller.text_2": "Use arrow keys and WASD to control the 8 redstone outputs.",
+
+ "zps.ponder.data_cable.header": "Data Cables",
+ "zps.ponder.data_cable.text_1": "Data Cables send information as text between compatible blocks.",
+ "zps.ponder.data_cable.text_2": "A minimum setup has an input and output.",
+ "zps.ponder.data_cable.text_3": "Data provided to the input is sent to all connected outputs.",
+
+ "zps.ponder.script_terminal.header": "Script Terminal",
+ "zps.ponder.script_terminal.text_1": "The Script Terminal sends commands to interact with other blocks, through connected Serial Busses.",
+ "zps.ponder.script_terminal.text_2": "To input commands, interact with the Script terminal to open a GUI.",
+ "zps.ponder.script_terminal.text_3": "When given a Redstone signal, the Script Terminal will dispatch each of its commands, in sequence.",
+ "zps.ponder.script_terminal.text_4": "Each command is executed once for each connected Serial Bus, positioned in front of the Serial Bus interface.",
+ "zps.ponder.script_terminal.text_5": "if block == minecraft:piston[facing=up] set_redstone 15",
+ "zps.ponder.script_terminal.text_6": "set_redstone 0",
+
+ "zps.ponder.data_transcriber.header": "Data Transcriber",
+ "zps.ponder.data_transcriber.text_1": "The Data Transcriber can write Data to a Book and Quill held in a Lectern or Data Lectern underneath.",
+ "zps.ponder.data_transcriber.text_2": "When powered, it will copy the input Data to the current page of the book below.",
+ "zps.ponder.data_transcriber.text_3": "If the input Data changes while the Data Transcriber is powered, it will turn to the next page and then write the new Data.",
+
+ "zps.ponder.robotic_arm.header": "Robotic Arm",
+ "zps.ponder.robotic_arm.text_1": "The Robotic Arm can interact with and move items between nearby blocks.",
+ "zps.ponder.robotic_arm.text_2": "While active, the arm consumes 8 FE per tick.",
+ "zps.ponder.robotic_arm.text_3": "To control the Robotic Arm, send instructions from an adjacent Serial Bus.",
+ "zps.ponder.robotic_arm.text_4": "The arm can accept a new instruction once every 16 gameticks.",
+ "zps.ponder.robotic_arm.text_5": "take_items 1 3 5",
+ "zps.ponder.robotic_arm.text_6": "drop_items 0 2 2",
+ "zps.ponder.robotic_arm.text_7": "take_items 1 3 5",
+ "zps.ponder.robotic_arm.text_8": "use 0 1 2",
+ "zps.ponder.robotic_arm.text_9": "use 6 1 4",
+
+ "zps.ponder.reactor_intro.header": "Setting up a Fusion Reactor",
+ "zps.ponder.reactor_intro.text_1": "The Fusion Reactor produces large amounts of FE by reacting Flux into Aether.",
+ "zps.ponder.reactor_intro.text_2": "A Fusion Reactor is a sealed chamber, built out of Reinforced Plating and Reinforced Glass.",
+ "zps.ponder.reactor_intro.text_3": "The inside of the chamber stays empty, and only holds gas.",
+ "zps.ponder.reactor_intro.text_4": "Once the chamber is fully sealed, the blocks form a reactor. No controller block is needed.",
+ "zps.ponder.reactor_intro.text_5": "Reactor Ports move gas through the wall, and can be set to Input or Output.",
+ "zps.ponder.reactor_intro.text_6": "A Reactor Port stays closed until it receives a Redstone signal, and opens further as the signal gets stronger...",
+ "zps.ponder.reactor_intro.text_7": "...until at full strength, the port is fully open.",
+ "zps.ponder.reactor_intro.text_8": "Heat Exchangers convert FE into heat inside the chamber, or heat back into FE.",
+ "zps.ponder.reactor_intro.text_9": "Flux enters through an Input port when the Gas Duct's pressure is higher than the chamber's.",
+ "zps.ponder.reactor_intro.text_10": "Flux has to be heated before it will react.",
+ "zps.ponder.reactor_intro.text_11": "FE supplied to a Heat Exchanger will heat the gas in the chamber...",
+ "zps.ponder.reactor_intro.text_12": "...and at 50,000 K, the Flux fuses into Aether, releasing a large amount of heat.",
+ "zps.ponder.reactor_intro.text_13": "Once ignited, the reaction keeps the chamber hot by itself.",
+ "zps.ponder.reactor_intro.text_14": "Heat Exchangers that are not being supplied with FE will generate FE from the chamber's heat.",
+ "zps.ponder.reactor_intro.text_15": "Aether builds up in the chamber as the Flux reacts. Too much of it will pause the reaction.",
+ "zps.ponder.reactor_intro.text_16": "An Output port can pump the Aether out. Block Flux in its filter, so that the fuel stays inside.",
+ "zps.ponder.reactor_intro.text_17": "The reactor keeps running while Flux is supplied and Aether is removed. If the chamber gets too cold, the reaction will stop.",
+
+ "zps.ponder.reactor_monitoring.header": "Monitoring a Fusion Reactor",
+ "zps.ponder.reactor_monitoring.text_1": "A Serial Bus in Get mode can read the state of a reactor from any of its wall blocks.",
+ "zps.ponder.reactor_monitoring.text_2": "reactor_pressure",
+ "zps.ponder.reactor_monitoring.text_3": "reactor_temperature",
+ "zps.ponder.reactor_monitoring.text_4": "reactor_output",
+ "zps.ponder.reactor_monitoring.text_5": "Pressure is read in Pa, temperature in K, and output in FE per tick.",
+ "zps.ponder.reactor_monitoring.text_6": "Watching these values makes it easier to understand what the reactor is doing, and to avoid a failure.",
+
+ "zps.ponder.reactor_overheating.header": "Keeping a Fusion Reactor from Overheating",
+ "zps.ponder.reactor_overheating.text_1": "A Fusion Reactor will melt one of its wall blocks if the chamber exceeds 200,000 K.",
+ "zps.ponder.reactor_overheating.text_2": "The chamber heats up whenever the reaction generates heat faster than the Heat Exchangers can remove it.",
+ "zps.ponder.reactor_overheating.text_3": "The reaction pauses while Aether is above a quarter of the gas, so the Output port sets how fast it can run.",
+ "zps.ponder.reactor_overheating.text_4": "Weakening the Output port's Redstone signal keeps more Aether inside, so less heat is generated and the Heat Exchangers can catch up.",
+ "zps.ponder.reactor_overheating.text_5": "A Heat Exchanger can only extract heat while its FE has somewhere to go...",
+ "zps.ponder.reactor_overheating.text_6": "...so if the machines it powers are full, it will stop cooling the chamber.",
+ "zps.ponder.reactor_overheating.text_7": "Each Heat Exchanger can only extract so much heat, so they limit how fast a reactor can safely run.",
+ "zps.ponder.reactor_overheating.text_8": "To produce more FE, add more Heat Exchangers, then open the Output port further. This will also consume more Flux.",
+
+ "zps.ponder.reactor_bursting.header": "Keeping a Fusion Reactor from Bursting",
+ "zps.ponder.reactor_bursting.text_1": "A Fusion Reactor will burst if the pressure in its chamber exceeds 24 MPa.",
+ "zps.ponder.reactor_bursting.text_2": "The pressure in the chamber rises and falls with its temperature.",
+ "zps.ponder.reactor_bursting.text_3": "A chamber filled with cold Flux will reach over a hundred times its pressure by the time it ignites...",
+ "zps.ponder.reactor_bursting.text_4": "...and will burst long before it gets there.",
+ "zps.ponder.reactor_bursting.text_5": "Before igniting, give the Input port only a weak Redstone signal, so that only a little Flux gets in.",
+ "zps.ponder.reactor_bursting.text_6": "Once the reactor is lit, the Input port can be opened up again.",
+ "zps.ponder.reactor_bursting.text_7": "A reactor that overheats gains pressure as well, and can burst before its walls melt.",
+
+ "zps.ponder.gas_duct.header": "Gas Ducts",
+ "zps.ponder.gas_duct.text_1": "Gas Ducts carry gas between blocks.",
+ "zps.ponder.gas_duct.text_2": "Gas is simulated with a pressure and a temperature. It flows from higher pressure to lower pressure, so it spreads out along the run.",
+ "zps.ponder.gas_duct.text_3": "Each gas has its own density and heat capacity, so different gases behave differently in the same duct.",
+ "zps.ponder.gas_duct.text_4": "A Gas Gauge reads the pressure of the gas in the duct it is attached to.",
+ "zps.ponder.gas_duct.text_5": "Sneak and click it to read temperature instead.",
+ "zps.ponder.gas_duct.text_6": "A Gas Duct bursts above 16.4 MPa, and is destroyed above 1,478 K.",
+ "zps.ponder.gas_duct.text_7": "The dial covers exactly this range. A needle at the top of the dial is a duct at its limit.",
+ "zps.ponder.gas_duct.text_8": "As gas keeps arriving with nowhere to go, the pressure climbs until a duct bursts.",
+ "zps.ponder.gas_duct.text_9": "A burst leaves the ducts around it open, and they bleed gas into the air until a Gas Duct is placed back against them.",
+ "zps.ponder.gas_duct.text_10": "A Vent at the end of the run releases gas into the air, so the pressure never reaches the limit.",
+
+
+ "zps.ponder.tag.can_insulate": "Blocks that can be Insulated",
+ "zps.ponder.tag.can_insulate.description": "Components or Blocks which can have Cable Insulation applied to them, which prevents the block from connecting in new directions.",
+
+ "zps.ponder.tag.cable_components": "Cable Components",
+ "zps.ponder.tag.cable_components.description": "Blocks that carry or use cable signals.",
+
+ "zps.ponder.tag.data_cable_components": "Data Cable Components",
+ "zps.ponder.tag.data_cable_components.description": "Blocks that send or receive messages through Data Cables.",
+
+ "zps.ponder.tag.has_script_caps": "Blocks with Script Capabilities",
+ "zps.ponder.tag.has_script_caps.description": "Blocks which have extra Script Capabilities beyond the default 'set_redstone' command.",
+
+ "zps.ponder.tag.reactor_wall_blocks": "Reactor Wall Blocks",
+ "zps.ponder.tag.reactor_wall_blocks.description": "Blocks which can form part of the sealed chamber of a Fusion Reactor.",
+
+ "creativetab.zps_tab_deco": "Zero Point Systems Blocks",
+
+ "block.zps.switch_panel.zps_tooltip": "4 levers in 1!\n\nEach switch controls one of the four outputs. Connects with [Dense Cables].",
+ "block.zps.graduated_lever.zps_tooltip": "Allows precise control of a redstone signal.\n\nInteract with the upper or lower half of the block to increase or decrease signal strength. Connects with [Cable].",
+ "block.zps.power_cell.zps_tooltip": "Stores up to 2.1M FE per cell.\n\nCells placed in a square column (up to 3x3 wide and 32 tall) join into one larger cell with the combined capacity.\n\nCan be used to charge items that have [Energy Storage].",
+ "block.zps.beam_collector.zps_tooltip": "Projects a beam that pulls in items, mobs and blocks. Items and blocks that reach it are stored inside.\n\nPlace blocks facing the same way in a square (up to 3x3) to form a larger panel with a longer beam and more storage.\n\nRuns only when receiving a Redstone signal, and consumes FE while running. The signal strength sets the beam's range.",
+ "block.zps.coal_burner.zps_tooltip": "Burns furnace fuel to generate %s FE/tick.",
+ "block.zps.rolling_mill.zps_tooltip": "Consumes FE to roll metal.\n\nRolls ingots into rods and nuggets into wire.",
+ "block.zps.vaporizer.zps_tooltip": "Consumes FE to heat up, then vaporizes items into gas.\n\nEach recipe needs a minimum temperature and cools the machine when it runs. The gas collects in an internal buffer and leaves through the top.",
+ "block.zps.vent.zps_tooltip": "Releases gas from a [Gas Duct] into the air to prevent pressure buildup.\n\nCloses when receiving a redstone signal.\n\n[R-Click] an open vent to climb inside.\nEntering a vent with very hot or very cold gas can be dangerous.",
+ "block.zps.assembler.zps_tooltip": "Consumes FE to craft items in a [5x5 crafting grid].\n\nConsumes 16 FE/t while crafting, and works only when receiving a Redstone signal.",
+ "block.zps.impact_piston.zps_tooltip": "Consumes FE to slam a heavy rod into the block underneath.\n\nConsumes 64 FE/t while raising the rod, and works only when receiving a Redstone signal.",
+ "block.zps.sieve.zps_tooltip": "Allows players and mobs to stand on top, while other entities fall through.\n\nFalling blocks that drop through are [sifted]: any loot buried inside is collected in the sieve.",
+ "block.zps.catwalk.zps_tooltip": "Can be placed on cable blocks to prevent upwards connection.",
+ "block.zps.space_grating_block.zps_tooltip": "Can be placed on cable blocks to prevent connection in new directions.",
+
+ "item.zps.script_book.zps_tooltip": "Can also be opened from the Script Terminal screen without this book",
+
+ "block.zps.radio_transmitter.zps_tooltip": "Transmits a radio signal with data from a [Data Cable].\n\nTune the radio frequency with [Shift + Right Click]. Higher frequencies have a longer range and require a taller [Radio Antenna] on top.",
+ "block.zps.radio_receiver.zps_tooltip": "Receives a radio signal and sends the data over a [Data Cable].\n\nTune the radio frequency with [Shift + Right Click]. Higher frequencies have a longer range and require a taller [Radio Antenna] on top.",
+
+ "block.zps.loudspeaker.zps_tooltip": "Converts messages from a [Data Cable] into spoken audio.",
+
+ "block.zps.data_comparator.zps_tooltip": "Compares signals from two connected [Data Cables] according to the current mode.\n\n[Equals]: provides Redstone power when data from the two inputs match exactly.\n\n[Contains]: provides Redstone power when data from the first input contains the full data from the second.\n\n[Greater Than]: provides Redstone power when both inputs can be parsed as numbers and the first is greater than the second.\n\n[Shift + R-Click] to switch Modes.",
+
+ "block.zps.data_combinator.zps_tooltip": "Combines two [Data Cable] inputs into one output according to the current mode.\n\n[Back]: output port.\n[Left]: Input A. [Right]: Input B.\n\n[Append]: passthrough behavior for single inputs, and appends Input B to Input A when both are present.\n\n[Replace]: passthrough from Input A unless Input B is present and Input A contains [%s], in which case the first occurrence is replaced with Input B.\n\n[Shift + R-Click] to switch Modes.",
+
+ "block.zps.dodeca_controller.zps_tooltip": "More... MORE!!",
+ "item.zps.robotic_arm_segment.zps_tooltip": "Used to construct a [Robotic Arm].\n\n[R-Click an Incomplete Arm]: attaches this arm segment to the incomplete robotic arm.",
+ "item.zps.address_pad.zps_tooltip": "Saves named block positions as Addresses.\n\n[R-Click a block]: creates a new Address at that position (max 15).\n\n[R-Click the air]: opens GUI to manage saved Addresses.\n\n[R-Click a Script Terminal]: places the Address Pad on the Script Terminal, allowing the Addresses to be used in Script Commands.",
+
+ "sounds.zps.keystroke": "Keyboard clacks",
+ "sounds.zps.static": "Static hisses",
+ "sounds.zps.arm_move": "Robotic arm moves",
+ "sounds.zps.impact_thunk": "Impact Piston lands",
+ "sounds.zps.impact_anvil_break": "Anvil shatters",
+ "sounds.zps.reactor_hum": "Reactor hums",
+
+ "zps.duct.sealed": "The vent is sealed shut.",
+ "zps.duct.mount_hint": "Press %s to Exit, %s/%s to Crawl Through",
+ "zps.duct.hud.title": "Vent %s / %s",
+ "zps.duct.hud.entry": "%s, %s, %s \u00b7 where you got in",
+ "zps.duct.hud.destination": "%s, %s, %s \u00b7 %sm from entry",
+ "zps.duct.hud.hint": "[%s]/[%s] cycle \u00b7 [%s] climb out",
+
+ "zps.display_source.serial_bus": "Raw Input Data",
+ "zps.display_source.serial_bus_manual": "Stored Display Text",
+ "zps.display_source.reactor_status": "Reactor Status",
+ "zps.display_source.reactor.not_enough_space": "Not enough space ",
+ "zps.display_source.reactor.for_reactor_status": "for Reactor Status",
+ "zps.display_source.reactor.status": "Reactor Status: %1$s",
+ "zps.display_source.reactor.status_short": "Reactor: %1$s",
+ "zps.display_source.reactor.offline": "Offline",
+ "zps.display_source.reactor.empty": "Empty",
+ "zps.display_source.reactor.cold": "Cold",
+ "zps.display_source.reactor.lit": "Lit",
+ "zps.display_source.reactor.pressure": "Pressure",
+ "zps.display_source.reactor.pressure_dots": "... ",
+ "zps.display_source.reactor.temperature": "Heat",
+ "zps.display_source.reactor.temperature_dots": "................ ",
+ "zps.display_source.reactor.output": "Output",
+ "zps.display_source.reactor.output_dots": "........... ",
+
+ "gui.recipebook.toggleRecipes.rollable": "Rollable"
+}
diff --git a/projects/assets/zps/1.21/zps/lang/zh_cn.json b/projects/assets/zps/1.21/zps/lang/zh_cn.json
new file mode 100644
index 000000000000..87dd6c681050
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/lang/zh_cn.json
@@ -0,0 +1,596 @@
+{
+ "block.zps.cable": "线缆",
+ "block.zps.dense_cables": "致密线缆",
+ "block.zps.dense_cable_separator": "致密线缆分接器",
+ "block.zps.dense_cable_bend": "致密线缆拐角",
+ "block.zps.stepup_transformer": "升压变压器",
+ "block.zps.stepdown_transformer": "降压变压器",
+ "block.zps.redstone_converter": "红石转换器",
+ "block.zps.creative_power_cell": "创造能量单元",
+ "block.zps.creative_power_cell.zps_tooltip": "无限[FE]源,只能在创造模式中获得。",
+ "block.zps.power_cell": "能量单元",
+ "block.zps.beam_collector": "光束收集器",
+ "block.zps.coal_burner": "燃烧发电机",
+ "block.zps.rolling_mill": "轧机",
+ "block.zps.assembler": "组装机",
+ "block.zps.impact_piston": "冲击活塞",
+ "block.zps.composter_dirt": "装满泥土的堆肥桶",
+ "block.zps.sieve": "筛子",
+ "block.zps.vaporizer": "汽化机",
+ "gui.zps.vaporizer.temperature": "机器温度:%s",
+ "gui.zps.vaporizer.status.idle": "空闲:没有需要汽化的原材料",
+ "gui.zps.vaporizer.status.heating": "正在加热至%s",
+ "gui.zps.vaporizer.status.no_power": "无供能:需要%s",
+ "gui.zps.vaporizer.status.vaporizing": "正在汽化",
+ "gui.zps.vaporizer.status.output_full": "气体缓存已满",
+ "gui.zps.vaporizer.gas_buffer": "气体缓存",
+ "gui.zps.vaporizer.gas_empty": "空",
+ "gui.zps.vaporizer.gas_line": "%s:%s",
+ "gui.zps.vaporizer.gas_temperature": "温度:%s",
+ "gui.zps.vaporizer.gas_pressure": "压力:%s",
+ "jei.zps.vaporizing.temperature_cost": "温度消耗:%s K",
+ "block.zps.vent": "排气口",
+ "block.zps.gas_gauge": "气体仪表",
+ "gui.zps.gas_gauge.mode": "正在读取%s",
+ "gui.zps.gas_gauge.reading": "%s:%s",
+ "gui.zps.gas_gauge.mode.pressure": "压力",
+ "gui.zps.gas_gauge.mode.temperature": "温度",
+ "block.zps.gas_duct": "气体管道",
+ "block.zps.creative_gas_generator": "创造气体生成器",
+ "block.zps.creative_gas_generator.zps_tooltip": "无限[气体]源,只能在创造模式中获得。",
+ "block.zps.reinforced_plating": "强化镶板",
+ "block.zps.reinforced_glass": "强化玻璃",
+ "block.zps.reactor_port": "反应堆端口",
+ "block.zps.heat_exchanger": "换热器",
+ "gui.zps.reactor_port.mode": "方向",
+ "gui.zps.reactor_port.mode.input": "输入",
+ "gui.zps.reactor_port.mode.output": "输出",
+ "gui.zps.reactor_port.filter": "禁止的气体",
+ "gui.zps.reactor_port.filter.count": "%s / %s",
+ "gui.zps.reactor_port.filter.search": "搜索气体...",
+ "gui.zps.reactor_port.filter.no_matches": "没有匹配的气体",
+ "gui.zps.reactor_port.filter.unregistered": "未注册",
+ "gui.zps.reactor_port.filter.limit": "已达到气体禁止上限",
+ "gui.zps.reactor_port.filter.narration.blocked": "%s,禁止传输",
+ "gui.zps.reactor_port.filter.narration.passing": "%s,允许传输",
+ "gui.zps.reactor_port.no_gases": "未注册气体",
+ "gui.zps.reactor_port.no_port": "该处没有端口",
+ "advancement.zps.reactor_ignited.title": "盒中恒星",
+ "advancement.zps.reactor_ignited.description": "将聚变反应堆加热至点火温度。",
+ "advancement.zps.reactor_meltdown.title": "安全壳失效",
+ "advancement.zps.reactor_meltdown.description": "在运行中的聚变反应堆上烧出一个洞。",
+ "block.zps.suspicious_red_sand": "可疑的红沙",
+ "gui.zps.assembler.input": "输入",
+ "gui.zps.assembler.crafting": "合成样板",
+ "gui.zps.assembler.tag_ingredient": "接受该标签中的任意物品:",
+ "gui.zps.jei.shaped_5x5": "5x5合成",
+ "gui.zps.jei.impact": "冲击活塞",
+ "gui.zps.jei.impact.may_contain": "可能含有:",
+ "gui.zps.jei.impact.requires_state": "需要%s为:%s",
+ "gui.zps.jei.transfer_unsupported": "组装机无法接受此配方。",
+ "block.zps.octo_controller": "八缆控制器",
+ "block.zps.dodeca_controller": "十二缆控制器",
+ "block.zps.switch_panel": "开关面板",
+ "block.zps.graduated_lever": "定量拉杆",
+ "block.zps.cable_insulation": "线缆绝缘罩",
+ "block.zps.data_cable": "数据线缆",
+ "block.zps.data_lectern": "数据讲台",
+ "block.zps.text_display": "文本显示屏",
+ "block.zps.data_transcriber": "数据转录器",
+ "block.zps.radio_transmitter": "无线电发送器",
+ "block.zps.radio_receiver": "无线电接收器",
+ "block.zps.radio_antenna": "无线电天线",
+ "block.zps.data_comparator": "数据比较器",
+ "block.zps.data_combinator": "数据组合器",
+ "block.zps.serial_bus": "串行总线",
+ "gui.zps.serial_bus.mode": "模式",
+ "gui.zps.serial_bus.mode.execute": "执行",
+ "gui.zps.serial_bus.mode.get": "获取",
+ "gui.zps.serial_bus.last_command": "上一个命令",
+ "gui.zps.serial_bus.no_command": "尚未收到过命令",
+ "gui.zps.serial_bus.evaluating": "出现于执行以下命令时:",
+ "gui.zps.serial_bus.expression": "发送的值",
+ "gui.zps.serial_bus.expression_hint": "获取器和映射器,如pos as_string",
+ "gui.zps.serial_bus.no_bus": "该处没有串行总线",
+ "block.zps.script_terminal": "脚本终端",
+ "block.zps.loudspeaker": "扬声器",
+ "block.zps.robotic_arm": "机械臂",
+ "block.zps.incomplete_robotic_arm_0": "机械臂(半成品)",
+ "block.zps.incomplete_robotic_arm_1": "机械臂(半成品)",
+ "block.zps.incomplete_robotic_arm_2": "机械臂(半成品)",
+ "block.zps.bauxite": "铝土矿",
+ "block.zps.bauxite.zps_tooltip": "[铝]的来源。\n\n生成在[Y32]和[Y128]之间的地下,大多数位于[Y80]附近。",
+ "block.zps.lithium_ore": "锂矿石",
+ "block.zps.lithium_ore.zps_tooltip": "[锂]的来源。\n\n生成在[Y0]上方各处。",
+ "block.zps.deepslate_lithium_ore": "深层锂矿石",
+ "block.zps.deepslate_lithium_ore.zps_tooltip": "[锂]的来源。\n\n生成在[Y0]下方各处。",
+ "block.zps.aluminum_block": "铝块",
+ "block.zps.aluminum_plating": "铝镶板",
+ "block.zps.aluminum_plating_stairs": "铝镶板楼梯",
+ "block.zps.aluminum_plating_slab": "铝镶板台阶",
+ "block.zps.aluminum_plating_wall": "铝镶板墙",
+ "block.zps.lithium_block": "锂块",
+ "block.zps.raw_lithium_block": "粗锂块",
+ "block.zps.space_truss": "太空桁架",
+ "block.zps.space_scaffold": "太空脚手架",
+ "block.zps.space_mesh_block": "太空纱网方块",
+ "block.zps.space_grating_block": "太空格栅方块",
+ "block.zps.catwalk": "施工步道",
+ "block.zps.catwalk_stairs": "施工步道楼梯",
+ "block.zps.small_industrial_light": "小型工业灯",
+ "block.zps.industrial_light": "工业灯",
+ "block.zps.large_industrial_light": "大型工业灯",
+ "block.zps.caution_block": "警戒方块",
+ "block.zps.radiation_caution_block": "辐射警戒方块",
+ "block.zps.void_caution_block": "虚空警戒方块",
+ "block.zps.space_plating": "太空镶板",
+ "block.zps.space_plating_stairs": "太空镶板楼梯",
+ "block.zps.space_plating_slab": "太空镶板台阶",
+ "block.zps.space_plating_wall": "太空镶板墙",
+ "block.zps.riveted_space_plating": "镶铆太空镶板",
+ "block.zps.riveted_space_plating_stairs": "镶铆太空镶板楼梯",
+ "block.zps.riveted_space_plating_slab": "镶铆太空镶板台阶",
+ "block.zps.riveted_space_plating_wall": "镶铆太空镶板墙",
+ "block.zps.red_space_plating": "红色太空镶板",
+ "block.zps.red_space_plating_stairs": "红色太空镶板楼梯",
+ "block.zps.red_space_plating_slab": "红色太空镶板台阶",
+ "block.zps.red_space_plating_wall": "红色太空镶板墙",
+ "block.zps.orange_space_plating": "橙色太空镶板",
+ "block.zps.orange_space_plating_stairs": "橙色太空镶板楼梯",
+ "block.zps.orange_space_plating_slab": "橙色太空镶板台阶",
+ "block.zps.orange_space_plating_wall": "橙色太空镶板墙",
+ "block.zps.yellow_space_plating": "黄色太空镶板",
+ "block.zps.yellow_space_plating_stairs": "黄色太空镶板楼梯",
+ "block.zps.yellow_space_plating_slab": "黄色太空镶板台阶",
+ "block.zps.yellow_space_plating_wall": "黄色太空镶板墙",
+ "block.zps.green_space_plating": "绿色太空镶板",
+ "block.zps.green_space_plating_stairs": "绿色太空镶板楼梯",
+ "block.zps.green_space_plating_slab": "绿色太空镶板台阶",
+ "block.zps.green_space_plating_wall": "绿色太空镶板墙",
+ "block.zps.lime_space_plating": "黄绿色太空镶板",
+ "block.zps.lime_space_plating_stairs": "黄绿色太空镶板楼梯",
+ "block.zps.lime_space_plating_slab": "黄绿色太空镶板台阶",
+ "block.zps.lime_space_plating_wall": "黄绿色太空镶板墙",
+ "block.zps.cyan_space_plating": "青色太空镶板",
+ "block.zps.cyan_space_plating_stairs": "青色太空镶板楼梯",
+ "block.zps.cyan_space_plating_slab": "青色太空镶板台阶",
+ "block.zps.cyan_space_plating_wall": "青色太空镶板墙",
+ "block.zps.blue_space_plating": "蓝色太空镶板",
+ "block.zps.blue_space_plating_stairs": "蓝色太空镶板楼梯",
+ "block.zps.blue_space_plating_slab": "蓝色太空镶板台阶",
+ "block.zps.blue_space_plating_wall": "蓝色太空镶板墙",
+ "block.zps.light_blue_space_plating": "淡蓝色太空镶板",
+ "block.zps.light_blue_space_plating_stairs": "淡蓝色太空镶板楼梯",
+ "block.zps.light_blue_space_plating_slab": "淡蓝色太空镶板台阶",
+ "block.zps.light_blue_space_plating_wall": "淡蓝色太空镶板墙",
+ "block.zps.purple_space_plating": "紫色太空镶板",
+ "block.zps.purple_space_plating_stairs": "紫色太空镶板楼梯",
+ "block.zps.purple_space_plating_slab": "紫色太空镶板台阶",
+ "block.zps.purple_space_plating_wall": "紫色太空镶板墙",
+ "block.zps.magenta_space_plating": "品红色太空镶板",
+ "block.zps.magenta_space_plating_stairs": "品红色太空镶板楼梯",
+ "block.zps.magenta_space_plating_slab": "品红色太空镶板台阶",
+ "block.zps.magenta_space_plating_wall": "品红色太空镶板墙",
+ "block.zps.pink_space_plating": "粉红色太空镶板",
+ "block.zps.pink_space_plating_stairs": "粉红色太空镶板楼梯",
+ "block.zps.pink_space_plating_slab": "粉红色太空镶板台阶",
+ "block.zps.pink_space_plating_wall": "粉红色太空镶板墙",
+ "block.zps.brown_space_plating": "棕色太空镶板",
+ "block.zps.brown_space_plating_stairs": "棕色太空镶板楼梯",
+ "block.zps.brown_space_plating_slab": "棕色太空镶板台阶",
+ "block.zps.brown_space_plating_wall": "棕色太空镶板墙",
+ "block.zps.black_space_plating": "黑色太空镶板",
+ "block.zps.black_space_plating_stairs": "黑色太空镶板楼梯",
+ "block.zps.black_space_plating_slab": "黑色太空镶板台阶",
+ "block.zps.black_space_plating_wall": "黑色太空镶板墙",
+ "block.zps.gray_space_plating": "灰色太空镶板",
+ "block.zps.gray_space_plating_stairs": "灰色太空镶板楼梯",
+ "block.zps.gray_space_plating_slab": "灰色太空镶板台阶",
+ "block.zps.gray_space_plating_wall": "灰色太空镶板墙",
+ "block.zps.light_gray_space_plating": "淡灰色太空镶板",
+ "block.zps.light_gray_space_plating_stairs": "淡灰色太空镶板楼梯",
+ "block.zps.light_gray_space_plating_slab": "淡灰色太空镶板台阶",
+ "block.zps.light_gray_space_plating_wall": "淡灰色太空镶板墙",
+ "block.zps.chrome_space_plating": "铬白色太空镶板",
+ "block.zps.chrome_space_plating_stairs": "铬白色太空镶板楼梯",
+ "block.zps.chrome_space_plating_slab": "铬白色太空镶板台阶",
+ "block.zps.chrome_space_plating_wall": "铬白色太空镶板墙",
+ "block.zps.agate_space_plating": "玛瑙色太空镶板",
+ "block.zps.agate_space_plating_stairs": "玛瑙色太空镶板楼梯",
+ "block.zps.agate_space_plating_slab": "玛瑙色太空镶板台阶",
+ "block.zps.agate_space_plating_wall": "玛瑙色太空镶板墙",
+
+ "item.zps.cable": "线缆",
+ "item.zps.dense_cables": "致密线缆",
+ "item.zps.dense_cable_separator": "致密线缆分接器",
+ "item.zps.dense_cable_bend": "致密线缆拐角",
+ "item.zps.stepup_transformer": "升压变压器",
+ "item.zps.stepdown_transformer": "降压变压器",
+ "item.zps.redstone_converter": "红石转换器",
+ "item.zps.creative_power_cell": "创造能量单元",
+ "item.zps.power_cell": "能量单元",
+ "item.zps.beam_collector": "光束收集器",
+ "item.zps.coal_burner": "燃烧发电机",
+ "item.zps.energy_storage_module": "能量储存模块",
+ "item.zps.power_drill": "电钻",
+ "item.zps.power_drill.energy": "存有能量:%s / %s FE",
+ "item.zps.chainsaw": "链锯",
+ "item.zps.chainsaw.energy": "存有能量:%s / %s FE",
+ "item.zps.octo_controller": "八缆控制器",
+ "item.zps.dodeca_controller": "十二缆控制器",
+ "item.zps.switch_panel": "开关面板",
+ "item.zps.graduated_lever": "定量拉杆",
+ "item.zps.cable_insulation": "线缆绝缘罩",
+ "item.zps.data_cable": "数据线缆",
+ "item.zps.data_lectern": "数据讲台",
+ "item.zps.text_display": "文本显示屏",
+ "item.zps.radio_transmitter": "无线电发送器",
+ "item.zps.radio_receiver": "无线电接收器",
+ "item.zps.radio_antenna": "无线电天线",
+ "item.zps.data_comparator": "数据比较器",
+ "item.zps.data_combinator": "数据组合器",
+ "item.zps.serial_bus": "串行总线",
+ "item.zps.script_terminal": "脚本终端",
+ "item.zps.data_transcriber": "数据转录器",
+ "item.zps.loudspeaker": "扬声器",
+ "item.zps.robotic_arm": "机械臂",
+ "item.zps.incomplete_robotic_arm_0": "机械臂(半成品)",
+ "item.zps.incomplete_robotic_arm_1": "机械臂(半成品)",
+ "item.zps.incomplete_robotic_arm_2": "机械臂(半成品)",
+ "item.zps.incomplete_robotic_arm.segments": "%s/3 臂杆",
+ "item.zps.robotic_arm_segment": "机械臂臂杆",
+ "item.zps.bauxite": "铝土矿",
+ "item.zps.lithium_ore": "锂矿石",
+ "item.zps.deepslate_lithium_ore": "深层锂矿石",
+ "item.zps.aluminum_ingot": "铝锭",
+ "item.zps.aluminum_nugget": "铝粒",
+ "item.zps.copper_nugget": "铜粒",
+ "item.zps.aluminum_block": "铝块",
+ "item.zps.raw_lithium": "粗锂",
+ "item.zps.lithium_ingot": "锂锭",
+ "item.zps.lithium_nugget": "锂粒",
+ "item.zps.lithium_block": "锂块",
+ "item.zps.raw_lithium_block": "粗锂块",
+ "item.zps.space_metal_ingot": "太空金属锭",
+ "item.zps.space_metal_plate": "太空金属板",
+ "item.zps.space_metal_mesh": "太空金属纱网",
+ "item.zps.space_metal_rod": "太空金属棒",
+ "item.zps.space_metal_pipe": "太空金属管",
+ "item.zps.space_metal_screw": "太空金属螺丝",
+ "item.zps.space_metal_bolt": "太空金属螺栓",
+ "item.zps.space_metal_spring": "太空金属弹簧",
+ "item.zps.capacitor": "电容",
+ "item.zps.transistor": "晶体管",
+ "item.zps.modulator": "调制器",
+ "item.zps.copper_magnetron": "铜磁控管",
+ "item.zps.gold_magnetron": "金磁控管",
+ "item.zps.copper_wire": "铜线",
+ "item.zps.aluminum_wire": "铝线",
+ "item.zps.gold_wire": "金线",
+ "item.zps.verdite_wire": "绿石线",
+ "item.zps.empty_spool": "空线轴",
+ "item.zps.copper_spool": "铜线线轴",
+ "item.zps.gold_spool": "金线线轴",
+ "item.zps.verdite_spool": "绿石线线轴",
+ "item.zps.address_pad": "地址写字板",
+ "item.zps.script_book": "脚本命令手册",
+ "item.zps.space_truss": "太空桁架",
+ "item.zps.space_scaffold": "太空脚手架",
+ "item.zps.space_mesh_block": "太空纱网方块",
+ "item.zps.space_grating_block": "太空格栅方块",
+ "item.zps.catwalk": "施工步道",
+ "item.zps.catwalk_stairs": "施工步道楼梯",
+ "item.zps.small_industrial_light": "小型工业灯",
+ "item.zps.industrial_light": "工业灯",
+ "item.zps.large_industrial_light": "大型工业灯",
+ "item.zps.caution_block": "警戒方块",
+ "item.zps.radiation_caution_block": "辐射警戒方块",
+ "item.zps.void_caution_block": "虚空警戒方块",
+ "item.zps.space_plating": "太空镶板",
+ "item.zps.space_plating_stairs": "太空镶板楼梯",
+ "item.zps.space_plating_slab": "太空镶板台阶",
+ "item.zps.space_plating_wall": "太空镶板墙",
+ "item.zps.riveted_space_plating": "镶铆太空镶板",
+ "item.zps.riveted_space_plating_stairs": "镶铆太空镶板楼梯",
+ "item.zps.riveted_space_plating_slab": "镶铆太空镶板台阶",
+ "item.zps.riveted_space_plating_wall": "镶铆太空镶板墙",
+ "item.zps.red_space_plating": "红色太空镶板",
+ "item.zps.red_space_plating_stairs": "红色太空镶板楼梯",
+ "item.zps.red_space_plating_slab": "红色太空镶板台阶",
+ "item.zps.red_space_plating_wall": "红色太空镶板墙",
+ "item.zps.orange_space_plating": "橙色太空镶板",
+ "item.zps.orange_space_plating_stairs": "橙色太空镶板楼梯",
+ "item.zps.orange_space_plating_slab": "橙色太空镶板台阶",
+ "item.zps.orange_space_plating_wall": "橙色太空镶板墙",
+ "item.zps.yellow_space_plating": "黄色太空镶板",
+ "item.zps.yellow_space_plating_stairs": "黄色太空镶板楼梯",
+ "item.zps.yellow_space_plating_slab": "黄色太空镶板台阶",
+ "item.zps.yellow_space_plating_wall": "黄色太空镶板墙",
+ "item.zps.green_space_plating": "绿色太空镶板",
+ "item.zps.green_space_plating_stairs": "绿色太空镶板楼梯",
+ "item.zps.green_space_plating_slab": "绿色太空镶板台阶",
+ "item.zps.green_space_plating_wall": "绿色太空镶板墙",
+ "item.zps.lime_space_plating": "黄绿色太空镶板",
+ "item.zps.lime_space_plating_stairs": "黄绿色太空镶板楼梯",
+ "item.zps.lime_space_plating_slab": "黄绿色太空镶板台阶",
+ "item.zps.lime_space_plating_wall": "黄绿色太空镶板墙",
+ "item.zps.cyan_space_plating": "青色太空镶板",
+ "item.zps.cyan_space_plating_stairs": "青色太空镶板楼梯",
+ "item.zps.cyan_space_plating_slab": "青色太空镶板台阶",
+ "item.zps.cyan_space_plating_wall": "青色太空镶板墙",
+ "item.zps.blue_space_plating": "蓝色太空镶板",
+ "item.zps.blue_space_plating_stairs": "蓝色太空镶板楼梯",
+ "item.zps.blue_space_plating_slab": "蓝色太空镶板台阶",
+ "item.zps.blue_space_plating_wall": "蓝色太空镶板墙",
+ "item.zps.light_blue_space_plating": "淡蓝色太空镶板",
+ "item.zps.light_blue_space_plating_stairs": "淡蓝色太空镶板楼梯",
+ "item.zps.light_blue_space_plating_slab": "淡蓝色太空镶板台阶",
+ "item.zps.light_blue_space_plating_wall": "淡蓝色太空镶板墙",
+ "item.zps.purple_space_plating": "紫色太空镶板",
+ "item.zps.purple_space_plating_stairs": "紫色太空镶板楼梯",
+ "item.zps.purple_space_plating_slab": "紫色太空镶板台阶",
+ "item.zps.purple_space_plating_wall": "紫色太空镶板墙",
+ "item.zps.magenta_space_plating": "品红色太空镶板",
+ "item.zps.magenta_space_plating_stairs": "品红色太空镶板楼梯",
+ "item.zps.magenta_space_plating_slab": "品红色太空镶板台阶",
+ "item.zps.magenta_space_plating_wall": "品红色太空镶板墙",
+ "item.zps.pink_space_plating": "粉红色太空镶板",
+ "item.zps.pink_space_plating_stairs": "粉红色太空镶板楼梯",
+ "item.zps.pink_space_plating_slab": "粉红色太空镶板台阶",
+ "item.zps.pink_space_plating_wall": "粉红色太空镶板墙",
+ "item.zps.brown_space_plating": "棕色太空镶板",
+ "item.zps.brown_space_plating_stairs": "棕色太空镶板楼梯",
+ "item.zps.brown_space_plating_slab": "棕色太空镶板台阶",
+ "item.zps.brown_space_plating_wall": "棕色太空镶板墙",
+ "item.zps.black_space_plating": "黑色太空镶板",
+ "item.zps.black_space_plating_stairs": "黑色太空镶板楼梯",
+ "item.zps.black_space_plating_slab": "黑色太空镶板台阶",
+ "item.zps.black_space_plating_wall": "黑色太空镶板墙",
+ "item.zps.gray_space_plating": "灰色太空镶板",
+ "item.zps.gray_space_plating_stairs": "灰色太空镶板楼梯",
+ "item.zps.gray_space_plating_slab": "灰色太空镶板台阶",
+ "item.zps.gray_space_plating_wall": "灰色太空镶板墙",
+ "item.zps.light_gray_space_plating": "淡灰色太空镶板",
+ "item.zps.light_gray_space_plating_stairs": "淡灰色太空镶板楼梯",
+ "item.zps.light_gray_space_plating_slab": "淡灰色太空镶板台阶",
+ "item.zps.light_gray_space_plating_wall": "淡灰色太空镶板墙",
+ "item.zps.chrome_space_plating": "铬白色太空镶板",
+ "item.zps.chrome_space_plating_stairs": "铬白色太空镶板楼梯",
+ "item.zps.chrome_space_plating_slab": "铬白色太空镶板台阶",
+ "item.zps.chrome_space_plating_wall": "铬白色太空镶板墙",
+ "item.zps.agate_space_plating": "玛瑙色太空镶板",
+ "item.zps.agate_space_plating_stairs": "玛瑙色太空镶板楼梯",
+ "item.zps.agate_space_plating_slab": "玛瑙色太空镶板台阶",
+ "item.zps.agate_space_plating_wall": "玛瑙色太空镶板墙",
+ "item.zps.redstone_wand": "红石棒",
+ "zps.manual.group.networks": "数据网络",
+ "zps.manual.group.language": "脚本语言",
+ "zps.manual.group.integrations": "兼容",
+ "zps.manual.group.gameplay": "游戏内容",
+ "zps.manual.syntax": "语法",
+ "zps.manual.executors": "执行器",
+ "zps.manual.getters": "获取器",
+ "zps.manual.mappers": "映射器",
+ "zps.manual.basics": "基础",
+ "zps.manual.collisions": "碰撞",
+ "zps.manual.reactors": "反应堆",
+ "zps.manual.create": "机械动力",
+ "zps.manual.sable": "Sable",
+ "zps.manual.valkyrien_skies": "Valkyrien Skies",
+ "zps.screen.open_manual": "打开脚本命令手册",
+
+ "painting.zps.quasar.title": "Quasar",
+ "painting.zps.quasar.author": "PacificCyan",
+
+ "creativetab.zps_tab": "零点系统",
+
+ "key.zps.a": "频道A",
+ "key.zps.b": "频道B",
+ "key.zps.c": "频道C",
+ "key.zps.d": "频道D",
+ "key.zps.e": "频道E",
+ "key.zps.f": "频道F",
+ "key.zps.g": "频道G",
+ "key.zps.h": "频道H",
+ "key.zps.i": "频道I",
+ "key.zps.j": "频道J",
+ "key.zps.k": "频道K",
+ "key.zps.l": "频道L",
+ "key.categories.zps": "零点系统(Zero Point Systems)",
+
+
+ "zps.ponder.cable.header": "线缆",
+ "zps.ponder.cable.text_1": "单独存在的线缆没有功能。",
+ "zps.ponder.cable.text_2": "置入红石转换器可传输红石信号。",
+
+ "zps.ponder.energy.header": "能量线缆",
+ "zps.ponder.energy.text_1": "升压变压器会从其相邻方块中抽取FE……",
+ "zps.ponder.energy.text_2": "……并向相连的降压变压器处输送。",
+
+ "zps.ponder.energy_explode.header": "转换器过电压",
+ "zps.ponder.energy_explode.text_1": "注意不要向红石转换器供应FE……",
+ "zps.ponder.energy_explode.text_2": "红石转换器无法承受较高的电压,会因此爆炸。",
+
+ "zps.ponder.insulation.header": "线缆绝缘罩",
+ "zps.ponder.insulation.text_1": "裸露的线缆之间必定会形成连接,但有些时候不应连起两端。",
+ "zps.ponder.insulation.text_2": "套上绝缘罩,可阻止线缆方块建立新连接。",
+
+ "zps.ponder.dense_cables.header": "致密线缆",
+ "zps.ponder.dense_cables.text_1": "狭窄的空间可能会很难处理。",
+ "zps.ponder.dense_cables.text_2": "致密线缆能在1个方块内传输4个信号。",
+ "zps.ponder.dense_cables.text_3": "可用致密线缆分接器将多条普通线缆合并为一条致密线缆。",
+ "zps.ponder.dense_cables.text_4": "Shift右击可旋转致密线缆分接器",
+ "zps.ponder.dense_cables.text_5": "如此会改变信号的传输路线。",
+
+ "zps.ponder.octo_controller.header": "八缆控制器",
+ "zps.ponder.octo_controller.text_1": "与八缆控制器交互以进入控制模式。",
+ "zps.ponder.octo_controller.text_2": "使用方向键和WASD来控制8个红石输出。",
+
+ "zps.ponder.data_cable.header": "数据线缆",
+ "zps.ponder.data_cable.text_1": "数据线缆能在兼容的方块间以文本形式传输信息。",
+ "zps.ponder.data_cable.text_2": "最简设施由输入和输出组成。",
+ "zps.ponder.data_cable.text_3": "输入端提供的数据会发送至相连的所有输出端。",
+
+ "zps.ponder.script_terminal.header": "脚本终端",
+ "zps.ponder.script_terminal.text_1": "脚本终端会通过相连的串行总线发送命令,以和其他方块交互。",
+ "zps.ponder.script_terminal.text_2": "可与脚本终端交互打开GUI来输入命令。",
+ "zps.ponder.script_terminal.text_3": "通入红石信号时,脚本终端会按顺序发出其中的每一条命令。",
+ "zps.ponder.script_terminal.text_4": "各命令会在所有相连的串行总线处各执行一次,基准位置为串行总线接口的前方。",
+ "zps.ponder.script_terminal.text_5": "if block == minecraft:piston[facing=up] set_redstone 15",
+ "zps.ponder.script_terminal.text_6": "set_redstone 0",
+
+ "zps.ponder.data_transcriber.header": "数据转录器",
+ "zps.ponder.data_transcriber.text_1": "数据转录器能向下方讲台或数据讲台中的书与笔写入数据。",
+ "zps.ponder.data_transcriber.text_2": "通入红石信号时,它会将输入数据复制到下方书的当前页中。",
+ "zps.ponder.data_transcriber.text_3": "若输入数据在有红石信号时发生了改变,数据转录器会将书翻到下一页,再写入新数据。",
+
+ "zps.ponder.robotic_arm.header": "机械臂",
+ "zps.ponder.robotic_arm.text_1": "机械臂能与周围方块交互,也能在周围方块间移动物品。",
+ "zps.ponder.robotic_arm.text_2": "激活时,机械臂每刻消耗8 FE。",
+ "zps.ponder.robotic_arm.text_3": "可通过相邻的串行总线发送指令来控制机械臂。",
+ "zps.ponder.robotic_arm.text_4": "机械臂每16个游戏刻能接受一条新指令。",
+ "zps.ponder.robotic_arm.text_5": "take_items 1 3 5",
+ "zps.ponder.robotic_arm.text_6": "drop_items 0 2 2",
+ "zps.ponder.robotic_arm.text_7": "take_items 1 3 5",
+ "zps.ponder.robotic_arm.text_8": "use 0 1 2",
+ "zps.ponder.robotic_arm.text_9": "use 6 1 4",
+
+ "zps.ponder.reactor_intro.header": "搭建聚变反应堆",
+ "zps.ponder.reactor_intro.text_1": "聚变反应堆通过将流气反应为以太来产出大量FE。",
+ "zps.ponder.reactor_intro.text_2": "聚变反应堆是由强化镶板和强化玻璃制成的封闭反应仓。",
+ "zps.ponder.reactor_intro.text_3": "仓室内部需留空,而且它只能容纳气体。",
+ "zps.ponder.reactor_intro.text_4": "仓室完全封闭之后,所有方块便会形成反应堆。不需要任何控制器方块参与。",
+ "zps.ponder.reactor_intro.text_5": "反应堆端口能穿过仓壁运输气体,可设为输入或输出。",
+ "zps.ponder.reactor_intro.text_6": "在收到红石信号前,反应堆端口保持关闭;信号越强,端口开得越大……",
+ "zps.ponder.reactor_intro.text_7": "……直到达到最大强度,端口完全敞开。",
+ "zps.ponder.reactor_intro.text_8": "换热器能将FE转换为仓室内的热量,也能将热量转换回FE。",
+ "zps.ponder.reactor_intro.text_9": "当气体管道压力大于仓室压力时,流气会通过输入端口进入反应堆。",
+ "zps.ponder.reactor_intro.text_10": "反应流气前需先加热。",
+ "zps.ponder.reactor_intro.text_11": "向换热器供应FE,可加热仓室中的气体……",
+ "zps.ponder.reactor_intro.text_12": "……达到50,000 K后,流气会聚变为以太,同时释放大量热量。",
+ "zps.ponder.reactor_intro.text_13": "点火之后,反应自身即可维持仓室的温度。",
+ "zps.ponder.reactor_intro.text_14": "未接受FE的换热器会使用仓室中的热量产出FE。",
+ "zps.ponder.reactor_intro.text_15": "随着流气不断反应,仓室中会逐渐累积以太。以太过多会阻断反应。",
+ "zps.ponder.reactor_intro.text_16": "可用输出端口泵出以太。需要在筛选器中禁止流气,以免排出燃料。",
+ "zps.ponder.reactor_intro.text_17": "供应流气并排出以太,即可让反应堆保持运作。仓室过冷时反应会停止。",
+
+ "zps.ponder.reactor_monitoring.header": "监控聚变反应堆",
+ "zps.ponder.reactor_monitoring.text_1": "获取模式下的串行总线能从反应堆的任意仓壁处读取反应堆的状态。",
+ "zps.ponder.reactor_monitoring.text_2": "reactor_pressure",
+ "zps.ponder.reactor_monitoring.text_3": "reactor_temperature",
+ "zps.ponder.reactor_monitoring.text_4": "reactor_output",
+ "zps.ponder.reactor_monitoring.text_5": "压力的单位是Pa,温度的是K,输出的是FE每刻。",
+ "zps.ponder.reactor_monitoring.text_6": "这些数据能帮你理解反应堆当前的状态,也能用于避免反应堆失效。",
+
+ "zps.ponder.reactor_overheating.header": "避免聚变反应堆过热",
+ "zps.ponder.reactor_overheating.text_1": "聚变反应堆会在仓室超过200,000 K时烧毁一个仓壁方块。",
+ "zps.ponder.reactor_overheating.text_2": "反应产热速度快于换热器冷却速度时,仓室会逐渐升温。",
+ "zps.ponder.reactor_overheating.text_3": "以太在气体中的占比大于四分之一时反应会暂停,因此可用输出端口调节反应的速度。",
+ "zps.ponder.reactor_overheating.text_4": "减弱输出端口的红石信号,可在仓室中保留更多以太,从而降低热量产量,以便换热器跟上。",
+ "zps.ponder.reactor_overheating.text_5": "换热器只会在FE有去向时抽出热量……",
+ "zps.ponder.reactor_overheating.text_6": "……如果所供能的所有机器都已充满能量,换热器便不会再冷却仓室。",
+ "zps.ponder.reactor_overheating.text_7": "单个换热器的冷却速度有上限,它们划定了反应堆运转速度的安全范围。",
+ "zps.ponder.reactor_overheating.text_8": "如需产出更多FE,可新增换热器,再进一步敞开输出端口。这也会增加流气的消耗量。",
+
+ "zps.ponder.reactor_bursting.header": "避免聚变反应堆爆炸",
+ "zps.ponder.reactor_bursting.text_1": "聚变反应堆会在仓室气压超过24 MPa时爆炸。",
+ "zps.ponder.reactor_bursting.text_2": "仓室中的压力会随温度一同升降。",
+ "zps.ponder.reactor_bursting.text_3": "装满冷流气的仓室在点火时,其压力能超过原先的一百倍……",
+ "zps.ponder.reactor_bursting.text_4": "……也即会在还远未达到点火温度时就爆炸。",
+ "zps.ponder.reactor_bursting.text_5": "点火前,应向输入端口通入强度较低的红石信号,将流气的输入量限制在极低。",
+ "zps.ponder.reactor_bursting.text_6": "反应堆点火后,可重新敞开输入端口。",
+ "zps.ponder.reactor_bursting.text_7": "过热反应堆内部的压力也会增加,有可能在仓壁烧毁前就爆炸。",
+
+ "zps.ponder.gas_duct.header": "气体管道",
+ "zps.ponder.gas_duct.text_1": "气体管道能在方块间运输气体。",
+ "zps.ponder.gas_duct.text_2": "气体的模拟带有压力和温度。它们会从高压处流向低压处,因此会在管道在逐渐散布开去。",
+ "zps.ponder.gas_duct.text_3": "每一种气体都有其密度和热容,不同气体在相同管道中的表现不同。",
+ "zps.ponder.gas_duct.text_4": "气体仪表能读取它所在管道的气体压力。",
+ "zps.ponder.gas_duct.text_5": "潜行点击可让其改为读取温度。",
+ "zps.ponder.gas_duct.text_6": "气体管道会在压力超过16.4 MPa时破裂,也会在温度超过1,478 K时损毁。",
+ "zps.ponder.gas_duct.text_7": "仪表的数据范围与之相符。表针指向仪表末尾代表管道达到了承受极限。",
+ "zps.ponder.gas_duct.text_8": "随着气体灌入而无法排出,压力会不断上升至管道爆炸。",
+ "zps.ponder.gas_duct.text_9": "裂口周围的管道不会自行闭合。它们会不断向外界漏气,直到在它们旁边放置气体管道才停止。",
+ "zps.ponder.gas_duct.text_10": "管道线路末端的排气口会向外界排气,这样压力就永远不会达到承受极限。",
+
+
+ "zps.ponder.tag.can_insulate": "可被绝缘的方块",
+ "zps.ponder.tag.can_insulate.description": "可用线缆绝缘罩包起的部件或方块,绝缘罩会阻止它们向其他方向建立新连接。",
+
+ "zps.ponder.tag.cable_components": "线缆部件",
+ "zps.ponder.tag.cable_components.description": "能传输或使用线缆信号的方块。",
+
+ "zps.ponder.tag.data_cable_components": "数据线缆部件",
+ "zps.ponder.tag.data_cable_components.description": "能通过数据线缆发送或接收消息的方块。",
+
+ "zps.ponder.tag.has_script_caps": "有脚本能力的方块",
+ "zps.ponder.tag.has_script_caps.description": "除默认的“set_redstone”命令外、拥有额外脚本能力的方块。",
+
+ "zps.ponder.tag.reactor_wall_blocks": "反应堆仓壁方块",
+ "zps.ponder.tag.reactor_wall_blocks.description": "能参与形成聚变反应堆密封仓的方块。",
+
+ "creativetab.zps_tab_deco": "零点系统丨方块",
+
+ "block.zps.switch_panel.zps_tooltip": "四拉杆合一!\n\n每个开关都分别控制着四条输出中的一个。能与[致密线缆]连接。",
+ "block.zps.graduated_lever.zps_tooltip": "可用于精确控制红石信号。\n\n与上半部或下半部交互可分别增加或降低信号强度。能与[线缆]连接。",
+ "block.zps.power_cell.zps_tooltip": "单个单元可储存最多2.1M FE。\n\n按正方形柱(横截面最大3x3,最高32)摆放的单元会合并为一个大型单元,容量也会合并。\n\n可给具有[能量容器]的物品充能。",
+ "block.zps.beam_collector.zps_tooltip": "发射一道能拉近物品、生物、方块的光束。碰到收集器的物品和方块会储存到其内部。\n\n按正方形(最大3x3)摆放朝向相同的收集器,可形成光束距离更长、仓储空间更大的大型面板。\n\n只会在通入红石信号时运作,运作时会消耗FE。光束的范围由信号强度决定。",
+ "block.zps.coal_burner.zps_tooltip": "燃烧熔炉燃料以产生%s FE/t。",
+ "block.zps.rolling_mill.zps_tooltip": "消耗FE以轧制金属。\n\n锭会被轧制为棒,粒会被轧制为线。",
+ "block.zps.vaporizer.zps_tooltip": "消耗FE以加热,随后将物品汽化为气体。\n\n每个配方都有所需的最小温度,且会在运行配方时冷却机器。所得气体会暂存在内部的缓存中,可从上方抽出。",
+ "block.zps.vent.zps_tooltip": "向外界释放[气体管道]中的气体以避免压力过大。\n\n通入红石信号可封堵。\n\n[右击]开放的排气口可钻入管道。\n钻入内有高温或低温气体的管道很危险。",
+ "block.zps.assembler.zps_tooltip": "消耗FE以在[5x5合成方格]中合成物品。\n\n合成时消耗16 FE/t,且仅会在有红石信号时运作。",
+ "block.zps.impact_piston.zps_tooltip": "消耗FE以让沉重的衔铁撞击下方方块。\n\n升起衔铁时消耗64 FE/t,且仅会在有红石信号时运作。",
+ "block.zps.sieve.zps_tooltip": "玩家和生物可站在其上,其他实体均会穿过它下落。\n\n下落的方块会被[过筛]:其中埋藏着的战利品会收集至筛子中。",
+ "block.zps.catwalk.zps_tooltip": "可放置在线缆方块上,阻止其与上方建立连接。",
+ "block.zps.space_grating_block.zps_tooltip": "可放置在线缆方块上,阻止其建立新连接。",
+
+ "item.zps.script_book.zps_tooltip": "也可在脚本终端界面中不通过该书打开",
+
+ "block.zps.radio_transmitter.zps_tooltip": "发送带有[数据线缆]中数据的无线电信号。\n\n[Shift+右击]调节无线电频率。高频无线电的范围更广,但也需要上方有更高的[无线电天线]。",
+ "block.zps.radio_receiver.zps_tooltip": "接收无线电信号,并将数据送入[数据线缆]。\n\n[Shift+右击]调节无线电频率。高频无线电的范围更广,但也需要上方有更高的[无线电天线]。",
+
+ "block.zps.loudspeaker.zps_tooltip": "将来自[数据线缆]的消息转换为语音音频。",
+
+ "block.zps.data_comparator.zps_tooltip": "根据模式比较相连两[数据线缆]中的信号。\n\n[相等]:两输入的数据完全匹配时发出红石信号。\n\n[包含]:第一个输入的数据包含着完整的第二个输入的数据时发出红石信号。\n\n[大于]:两输入均可解析为数,且第一个输入大于第二个时,发出红石信号。\n\n[Shift+右击]以切换模式。",
+
+ "block.zps.data_combinator.zps_tooltip": "根据模式将两[数据线缆]的输入组合为一个输出。\n\n[后面]:输出端口。\n[左面]:输入A。[右面]:输入B。\n\n[拼接]:仅有单个输入时直通,有两个输入时将输入B接在输入A末尾。\n\n[替换]:仅有输入A时直通;同时有输入B且输入A包含[%s]时,将第一次出现的位置替换为输入B。\n\n[Shift+右击]以切换模式。",
+
+ "block.zps.dodeca_controller.zps_tooltip": "更多……还要更多!!",
+ "item.zps.robotic_arm_segment.zps_tooltip": "用于构建[机械臂]。\n\n[右击机械臂半成品]:将臂杆接到机械臂半成品上。",
+ "item.zps.address_pad.zps_tooltip": "将有名称的方块位置保存为地址。\n\n[右击方块]:将该位置新建为地址(最多15个)。\n\n[右击空气]:打开管理已保存地址的GUI。\n\n[右击脚本终端]:将地址写字板放在脚本终端上,允许脚本命令使用其中地址。",
+
+ "sounds.zps.keystroke": "键盘:咔哒",
+ "sounds.zps.static": "白噪音:滋滋",
+ "sounds.zps.arm_move": "机械臂:移动",
+ "sounds.zps.impact_thunk": "冲击活塞:撞击",
+ "sounds.zps.impact_anvil_break": "铁砧:破裂",
+ "sounds.zps.reactor_hum": "反应堆:嗡鸣",
+
+ "zps.duct.sealed": "该排气口已被封住。",
+ "zps.duct.mount_hint": "按下%s来退出,按下%s/%s来钻入",
+ "zps.duct.hud.title": "排气口 %s / %s",
+ "zps.duct.hud.entry": "%s, %s, %s \u00b7 进入位置",
+ "zps.duct.hud.destination": "%s, %s, %s \u00b7 距进入位置%sm",
+ "zps.duct.hud.hint": "[%s]/[%s] 循环切换 \u00b7 [%s] 钻出",
+
+ "zps.display_source.serial_bus": "原始输入数据",
+ "zps.display_source.serial_bus_manual": "存储的显示屏文本",
+ "zps.display_source.reactor_status": "反应堆状态",
+ "zps.display_source.reactor.not_enough_space": "空间不足,无法",
+ "zps.display_source.reactor.for_reactor_status": "显示反应堆状态",
+ "zps.display_source.reactor.status": "反应堆状态:%1$s",
+ "zps.display_source.reactor.status_short": "反应堆:%1$s",
+ "zps.display_source.reactor.offline": "离线",
+ "zps.display_source.reactor.empty": "空",
+ "zps.display_source.reactor.cold": "过冷",
+ "zps.display_source.reactor.lit": "已点火",
+ "zps.display_source.reactor.pressure": "压力",
+ "zps.display_source.reactor.pressure_dots": "... ",
+ "zps.display_source.reactor.temperature": "热量",
+ "zps.display_source.reactor.temperature_dots": "................ ",
+ "zps.display_source.reactor.output": "输出",
+ "zps.display_source.reactor.output_dots": "........... ",
+
+ "gui.recipebook.toggleRecipes.rollable": "可轧制"
+}
From ef8bbefc115de55916e67fd7a0cafefe9face0b9 Mon Sep 17 00:00:00 2001
From: ChuijkYahus <94828194+ChuijkYahus@users.noreply.github.com>
Date: Fri, 30 Oct 2026 02:09:42 +0800
Subject: [PATCH 2/4] =?UTF-8?q?ZPS=20update=EF=BC=9A=E5=AE=98=E5=BA=93?=
=?UTF-8?q?=E6=9B=B4=E6=96=B0?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
---
.../zps/1.21/zps/doc/en_us/executors.md | 43 +++++++++-
.../assets/zps/1.21/zps/doc/en_us/getters.md | 31 +++++--
.../assets/zps/1.21/zps/doc/en_us/mappers.md | 50 ++++++++---
.../assets/zps/1.21/zps/doc/en_us/reactors.md | 9 +-
.../assets/zps/1.21/zps/doc/en_us/syntax.md | 51 +++++++++++-
.../zps/1.21/zps/doc/zh_cn/executors.md | 63 +++++++++++---
.../assets/zps/1.21/zps/doc/zh_cn/getters.md | 35 ++++++--
.../assets/zps/1.21/zps/doc/zh_cn/mappers.md | 82 ++++++++++++-------
.../assets/zps/1.21/zps/doc/zh_cn/reactors.md | 8 +-
.../assets/zps/1.21/zps/doc/zh_cn/syntax.md | 51 +++++++++++-
projects/assets/zps/1.21/zps/lang/en_us.json | 52 ++++++++----
projects/assets/zps/1.21/zps/lang/zh_cn.json | 52 ++++++++----
12 files changed, 411 insertions(+), 116 deletions(-)
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/executors.md b/projects/assets/zps/1.21/zps/doc/en_us/executors.md
index bee97db9e54e..caf73006deae 100644
--- a/projects/assets/zps/1.21/zps/doc/en_us/executors.md
+++ b/projects/assets/zps/1.21/zps/doc/en_us/executors.md
@@ -12,13 +12,15 @@ Available on: any target block
| Executor | Argument | Description |
|----------------|----------|-------------------------------------------------|
-| `set_redstone` | `<0-15>` | Provides a redstone signal to the target block. |
+| `set_redstone` | `<0-15>` | The Serial Bus emits a redstone signal into the target block, like a repeater facing it. |
+| `request_value` | `` | The Serial Bus answers with the value, for a Script Terminal's `receive_value`. See [Variables](syntax.md#variables). |
Examples:
```
set_redstone 15
-set_redstone value_of(get_page - 1)
+set_redstone value_of(page_number - 1)
+if pos == @lectern request_value value_of(page_number)
```
---
@@ -46,6 +48,37 @@ write_page value_of(dimension as_string)
---
+## Script Terminal
+
+The following command requires the target block to be a `Script Terminal`.
+
+| Executor | Argument | Description |
+|---------------|------------|-------------|
+| `load_script` | `` | Replaces the terminal's script, as if a player loaded it from a `.mungus` file. |
+
+The string's lines are the script's lines; in a quoted string, write a line break as `\n`. If the first line is a header such as `# 4t REPEAT` or `# 8t IMPULSE`, it sets the terminal's delay and mode and is not part of the script. Without a header, the terminal keeps its current delay and mode. A header delay other than 2, 4, 8 or 16 keeps the current delay.
+
+Inside a quoted string, write `"` as `\"` and `\` as `\\`, so an escape inside the loaded script is written `\\n`. A value from `value_of()` needs no escaping: its line breaks and backslashes arrive as they are. Loading the script the terminal already has, with the same delay and mode, changes nothing. Scripts over 32500 characters are skipped, and one line on the cable holds at most 3600 characters.
+
+Examples:
+
+```
+load_script "# 4t REPEAT\nif redstone > 0 set_redstone 15"
+load_script "write_page \"hi (there)\""
+load_script value_of(code)
+```
+
+Copying one terminal to another, with a Serial Bus facing each:
+
+```
+#var code = none
+if pos == @source request_value value_of(script_contents)
+receive_value code
+if pos == @copy load_script value_of(code)
+```
+
+---
+
## Radio Transmitter / Radio Receiver
The following command requires the target block to be a `Radio Transmitter` or `Radio Receiver`.
@@ -75,10 +108,14 @@ Unlike other executors, the argument is a **block position** (`x y z`) telling t
| `use` | `` | Right-clicks the target with the held item (place a block, fill/empty a bucket, use an item, ...). |
| `shift_use` | `` | Sneak right-clicks the target with the held item. |
| `drop_items` | `` | Drops held items into the world at the target position as item entities. |
+| `break` | `` | Breaks the target block at once, as if mining it with an iron pickaxe. Drops go into the hand. |
+| `silk_break` | `` | Like `break`, but with a silk touch iron pickaxe, so the block itself drops (glass, stone, ores). |
| `set_transfer_count` | `` | Sets the maximum stack size moved by `take_items`, `put_items`, and `drop_items` (1-64). |
`take_items`, `put_items`, and `drop_items` move at most the **transfer amount** configured in the arm's GUI (1–64) per instruction; any remainder stays in the arm's hand. `use` and `shift_use` interact with the held item and do not transfer a quantity.
+`break` and `silk_break` only break blocks an iron pickaxe can mine; the hand still moves to anything else but leaves it. Drops that don't fit in the hand fall into the world.
+
Examples:
```
@@ -86,6 +123,8 @@ take_items 1 3 5
put_items 0 1 2
set_transfer_count 16
drop_items 0 2 2
+break 1 1 3
+silk_break 1 2 3
```
```
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/getters.md b/projects/assets/zps/1.21/zps/doc/en_us/getters.md
index 4adecb7a6d44..0c53c2f9df01 100644
--- a/projects/assets/zps/1.21/zps/doc/en_us/getters.md
+++ b/projects/assets/zps/1.21/zps/doc/en_us/getters.md
@@ -45,19 +45,36 @@ The following getters require the target block to be a `Data Lectern` or a vanil
| Getter | Output | Description |
|--------|--------|-------------|
-| `get_page` | Int | The current page number of the book, 1-based. Returns `0` if there is no book. |
-| `read_page` | String | The text content of the current page. Returns an empty string if there is no book or the page is blank. |
+| `page_number` | Int | The current page number of the book, 1-based. Returns `0` if there is no book. |
+| `page_contents` | String | The text content of the current page, line breaks included. Returns an empty string if there is no book or the page is blank. |
Examples:
```
-if get_page > 3 set_redstone 15
-set_page value_of(get_page + 1)
+if page_number > 3 set_redstone 15
+set_page value_of(page_number + 1)
```
```
-if read_page == "open" set_redstone 15
-write_page value_of(read_page + " (edited)")
+if page_contents == "open" set_redstone 15
+write_page value_of(page_contents + " (edited)")
+```
+
+---
+
+## Script Terminal
+
+The following getter requires the target block to be a `Script Terminal`.
+
+| Getter | Output | Description |
+|-------------------|--------|-------------|
+| `script_contents` | String | The terminal's script as a `.mungus` file holds it: a `# 4t REPEAT` style header line, then the script. `load_script` takes it back unchanged. |
+
+Examples:
+
+```
+if script_contents lines > 20 set_redstone 15
+write_page value_of(script_contents)
```
---
@@ -71,7 +88,7 @@ The following getter requires the target block to be a `Robotic Arm`.
| `held_item` | Item | The item currently held in the arm's hand. Returns an empty stack if the hand is empty. |
| `transfer_count` | Int | The maximum stack size moved by `take_items`, `put_items`, and `drop_items`. |
-The resulting Item can be compared against an item predicate with `==`, or its stack size read with `count`.
+The resulting Item can be compared against an item predicate with `==`, its stack size read with `count`, or its id read as text with `id`.
Examples:
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/mappers.md b/projects/assets/zps/1.21/zps/doc/en_us/mappers.md
index 8206b1232f6a..e4878716ed50 100644
--- a/projects/assets/zps/1.21/zps/doc/en_us/mappers.md
+++ b/projects/assets/zps/1.21/zps/doc/en_us/mappers.md
@@ -40,12 +40,33 @@ Produced by: `block`
| Mapper | Output | Description |
|--------|--------|-------------|
| `== ` | Boolean | True if the block state matches the predicate (supports block properties) |
+| `id` | String | The block's id, such as `"minecraft:stone"`, without its properties |
Examples:
```
if block == minecraft:stone set_redstone 15
if block == minecraft:piston[facing=up] set_redstone 15
+if block id == value_of(page_contents) set_redstone 15
+```
+
+---
+
+## Item
+
+Produced by: `held_item`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `==
- ` | Boolean | True if the item matches the predicate |
+| `count` | Int | The stack size; `0` for an empty hand |
+| `id` | String | The item's id, such as `"minecraft:stone"`; `"minecraft:air"` for an empty hand |
+
+`==` only takes an item written in the script. To compare against text the script reads or receives, compare the `id`:
+
+```
+if held_item == minecraft:lava_bucket use 6 1 4
+if held_item id == value_of(page_contents get_line 0) use 6 1 4
```
---
@@ -102,7 +123,7 @@ A direction vector. Produced by: `vec_pos direction_to`, `ship world_vel`, `ship
## Int
-Produced by: `pos x/y/z`, `redstone`, `get_page`, `double rounded_down/rounded_up`, `ship id`, `dimension index`, `string as_int`
+Produced by: `pos x/y/z`, `redstone`, `page_number`, `double rounded_down/rounded_up`, `ship id`, `dimension index`, `string as_int`
| Mapper | Output | Description |
|--------|--------|-------------|
@@ -119,12 +140,13 @@ Produced by: `pos x/y/z`, `redstone`, `get_page`, `double rounded_down/rounded_u
| `* ` | Double | Multiplication |
| `/ ` | Double | Division |
| `as_string` | String | Converts to string |
+| `as_char` | String | The character with that code (`65 as_char` is `A`); a space for a code no character has |
Examples:
```
if redstone > 7 set_redstone 15
-set_redstone value_of(get_page - 1)
+set_redstone value_of(page_number - 1)
set_redstone value_of(pos x & 15)
```
@@ -151,32 +173,34 @@ Produced by: `pos x/y/z` (Vec Pos), `vec_dir length/dot`, `vec_box volume`, `int
## String
-Produced by: `read_page`, `pos as_string`, `dimension as_string`, `int as_string`, `double as_string`, `boolean as_string`, `ship slug`, `sublevel name`, `sublevel id`
+Produced by: `page_contents`, `script_contents`, `pos as_string`, `dimension as_string`, `int as_string`, `int as_char`, `double as_string`, `boolean as_string`, `ship slug`, `sublevel name`, `sublevel id`
| Mapper | Output | Description |
|--------|--------|-------------|
| `== ` | Boolean | Equality |
| `+ ` | String | Concatenation |
| `<+ ` | String | Prepends the given string |
-| `lines` | Int | Splits by `\n` and returns the number of lines |
-| `get_line ` | String | Splits by `\n` and returns the line at that index, or `""` if out of bounds |
-| `remove_line ` | String | Splits by `\n` and removes the line at that index; unchanged if out of bounds |
-| `split ` | String | Replaces every occurrence of the given delimiter with `\n` |
+| `lines` | Int | Splits at line breaks and returns the number of lines |
+| `get_line ` | String | Splits at line breaks and returns the line at that index, or `""` if out of bounds |
+| `remove_line ` | String | Splits at line breaks and removes the line at that index; unchanged if out of bounds |
+| `split ` | String | Replaces every occurrence of the given delimiter with a line break |
| `as_int` | Int | Parse as integer |
| `as_double` | Double | Parse as double |
| `as_block_pos` | BlockPos | Parse as `"x y z"` format |
| `as_boolean` | Boolean | Parse `"true"` / `"false"` (case-insensitive) |
| `as_dimension` | Dimension | Treat as a dimension key |
+In a quoted string, write a line break as `\n`, a `"` as `\"` and a `\` as `\\`. Escapes belong only to script text: a string's value holds real line breaks, and getters, executors and variables pass them on unchanged.
+
Examples:
```
-if read_page == "open" set_redstone 15
+if page_contents == "open" set_redstone 15
write_page value_of(pos as_string)
write_page value_of(pos as_string <+ "Pos: ")
-set_redstone value_of(read_page lines)
-write_page value_of(read_page remove_line 1)
-write_page value_of(read_page split ", ")
+set_redstone value_of(page_contents lines)
+write_page value_of(page_contents remove_line 1)
+write_page value_of(page_contents split ", ")
```
---
@@ -195,9 +219,9 @@ Examples:
```
if pos x > 0 && value_of(pos z > 0) set_redstone 15
-if read_page == "open" || value_of(redstone > 0) set_redstone 15
+if page_contents == "open" || value_of(redstone > 0) set_redstone 15
write_page value_of(redstone > 7 as_string)
-if read_page as_boolean set_redstone 15
+if page_contents as_boolean set_redstone 15
```
---
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/reactors.md b/projects/assets/zps/1.21/zps/doc/en_us/reactors.md
index 3fa646d20a24..31ae5645a0a0 100644
--- a/projects/assets/zps/1.21/zps/doc/en_us/reactors.md
+++ b/projects/assets/zps/1.21/zps/doc/en_us/reactors.md
@@ -24,7 +24,7 @@ The Flux will only react into Aether once the reactor temperature is above 50,00
to the heat exchangers on your reactor, you can feed it FE to heat it up to the reaction temperature.
If you attach Step-Up transformers to the heat exchangers, you can siphon off heat from the reactor to generate FE.
-Luckily, the transforms also include smart monitoring technology. That is to say they will only feed FE to the reactor
+Luckily, the heat exchangers also include smart monitoring technology. That is to say they will only feed FE to the reactor
if it is below 55,000K and they will only take FE from the reactor if it is above 55,000K. This means you can have
both an input and an output of FE attached to your reactor at all times, and you don't have to worry about somehow
enabling/disabling the transformers.
@@ -51,7 +51,7 @@ no longer be able to produce more heat. To deal with this, you need to handle pu
## Tip #1
-To get a reactor started, you should leave the Aether trapped inside (aka disable the output port with a full redstone signal).
+To get a reactor started, you should leave the Aether trapped inside (aka keep the output port closed by giving it no redstone signal).
Then you can let Flux flow in, and start heating it up with FE from your network.
It's best to restrict the flow of Flux in at first, since its cheaper to heat up less gas and helps avoid bursting once the Flux heats up.
@@ -59,7 +59,8 @@ Once it reaches 50,000K, the reaction can begin. It will heat up very quickly, b
enough to inhibit the reaction from going far enough to melt down.
Once you've reached a stable, but dwindling (from too much Aether) reaction you can start letting the Aether out.
-You can send an analog (e.g. between 0 and 15) redstone signal to the output hatch to control its exit rate.
+You can send an analog (e.g. between 0 and 15) redstone signal to the output hatch to control its exit rate:
+the stronger the signal, the further it opens.
You don't want it to exit too fast, but you also don't want it to exit too slow.
## Tip #2
@@ -71,7 +72,7 @@ Since you know it will only heat up once the transformers stop siphoning power f
you know that excessive heat will only happen once the power network is full.
When that happens, you don't have to shut down the reactor completely.
-Instead, close the Flux input and Aether output hatches completely (with a full redstone signal).
+Instead, close the Flux input and Aether output hatches completely (by cutting their redstone signal).
The reaction will stop heating up, and instead very slowly cool down. It should be able to stay
above reaction temperature (50,000K) for a long while.
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/syntax.md b/projects/assets/zps/1.21/zps/doc/en_us/syntax.md
index 2d9d759a3ce2..6fa16b84839d 100644
--- a/projects/assets/zps/1.21/zps/doc/en_us/syntax.md
+++ b/projects/assets/zps/1.21/zps/doc/en_us/syntax.md
@@ -97,6 +97,8 @@ wait 2
set_redstone 0
```
+`` is a whole number from 1 to 64. Anything else, or no number at all, waits one cycle.
+
`wait` behaves like an executor, but cannot be used with `if`, `unless`, or `else`.
It always runs when reached, and delays the dispatch of following commands.
@@ -167,7 +169,7 @@ The expression inside can be any getter → mapper chain, so long as it returns
Use `#def = ` at the top of a script to give a reusable name to a getter → mapper chain:
```
-#def first_line = read_page get_line 1
+#def first_line = page_contents get_line 1
write_page value_of(first_line)
```
@@ -179,8 +181,8 @@ Declarations are read from the top of the script. Blank lines are ignored while
Aliases may reference aliases declared earlier:
```
-#def line_1 = read_page get_line 1
-#def line_2 = read_page get_line 2
+#def line_1 = page_contents get_line 1
+#def line_2 = page_contents get_line 2
#def combined = line_2 + "\n" + value_of(line_1)
write_page value_of(combined)
@@ -191,3 +193,46 @@ Later aliases with the same name replace earlier aliases for following declarati
Alias bodies must start with a getter or an earlier alias, then may continue with mappers.
---
+
+## Variables
+
+A variable is a value the Script Terminal keeps between lines. A Serial Bus can be asked for a value, and the terminal stores it for later lines to use, at any bus on the network.
+
+Declare one with `#var = `:
+
+```
+#var page = 1
+```
+
+- The value must be a literal: a number, `true` or `false`, or a string. Use `#def` for getters and mappers.
+- A variable has no fixed type: like a literal alias, it is whatever its current value reads as. A value that does not suit the place it is used fails on that line, like any other command.
+- Names follow the alias rules. A variable cannot be declared twice, and cannot share a name with an alias: whichever is lower in the script is an error.
+
+A variable is used like an alias, wherever an expression starts. Each line carries the variable's value as it stands when the line is sent, so every bus sees the same value. An alias may use a variable declared above it, and takes its value the same way.
+
+```
+set_redstone value_of(page)
+if page > 8 set_redstone 15 else set_redstone 0
+```
+
+### Asking a Serial Bus for a value
+
+Every command the terminal sends stays on the Data Cable for one tick, then the cable goes blank until the next command. A bus can answer while it is blank:
+
+- `request_value ` is an executor. The bus that runs it puts the value on the cable when the cable goes blank, for one tick. Use `if pos == ...` to pick which bus answers.
+- `receive_value ` stores the answer to the last command sent in a variable declared above it. The terminal keeps that answer until it sends another command. Like `wait`, it works only on the Script Terminal and cannot be used with `if`, `unless` or `else`. Unlike `wait`, it takes no time: the line after it runs straight away. A looping script still takes at least 2 ticks per pass, however many free lines it has.
+
+```
+#var page = 1
+if pos == @lectern request_value value_of(page_number)
+receive_value page
+if pos == @lamp set_redstone value_of(page)
+```
+
+`wait` and `receive_value` send nothing, so a `wait` between a `request_value` and its `receive_value` does not lose the answer.
+
+`receive_value` stores whatever value was answered. It leaves the variable unchanged only if there is no answer, or if more than one bus answered: two answers at once are two senders, which garble the cable like any others.
+
+Variables keep their values across loop passes, and go back to their declared literals when the script is edited and at the start of each new powered run.
+
+---
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md b/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md
index c8ed7f8dc3ff..ea7226a51f6e 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/executors.md
@@ -10,15 +10,17 @@
可用于:任意目标方块
-| 执行器 | 参数 | 描述 |
-| -------------- | -------- | ------------------------ |
-| `set_redstone` | `<0-15>` | 向目标方块通入红石信号。 |
+| 执行器 | 参数 | 描述 |
+| --------------- | -------- | --------------------------------------------------------------------------- |
+| `set_redstone` | `<0-15>` | 串行总线会向目标方块通入红石信号,如同有中继器。 |
+| `request_value` | `<值>` | 串行总线会向脚本终端的`receive_value`回应所给值。见[变量](syntax.md#变量)。 |
例如:
```
set_redstone 15
-set_redstone value_of(get_page - 1)
+set_redstone value_of(page_number - 1)
+if pos == @lectern request_value value_of(page_number)
```
---
@@ -46,6 +48,37 @@ write_page value_of(dimension as_string)
---
+## 脚本终端
+
+下方命令需要目标方块为`脚本终端`。
+
+| 执行器 | 参数 | 描述 |
+| ------------- | ---------- | --------------------------------------------------- |
+| `load_script` | `` | 替换终端的脚本,和玩家从`.mungus`中加载的效果一样。 |
+
+所给字符串的各行变为脚本的各行;在引号字符串中,换行可写为`\n`。若第一行为形如`# 4t REPEAT`或`# 8t IMPULSE`的头部,则它会设置终端的延迟和模式,且该行不置入脚本。没有头部时,终端会保留当前的延迟和模式。头部的延迟若不为2、4、8或16,则会保留原有的延迟。
+
+在引号字符串内部,需将`"`写为`\"`,将`\`写为`\\`,也即所加载脚本中的换行应转义写为`\\n`。来自`value_of()`的值则无需转义:其中的换行和反斜杠会原样传入。加载终端中已有的脚本,同时延迟和模式也相同,便不会改变任何设置。超过32500个字符的脚本会被跳过,线缆中一行最多可有3600个字符。
+
+例如:
+
+```
+load_script "# 4t REPEAT\nif redstone > 0 set_redstone 15"
+load_script "write_page \"你好啊\""
+load_script value_of(code)
+```
+
+从一个终端复制到另一个终端,两者均贴有串行总线:
+
+```
+#var code = none
+if pos == @source request_value value_of(script_contents)
+receive_value code
+if pos == @copy load_script value_of(code)
+```
+
+---
+
## 无线电发送器 / 无线电接收器
下方命令需要目标方块为`无线电发送器`或`无线电接收器`。
@@ -68,17 +101,21 @@ set_frequency 10
和其他执行器不同,这些执行器需要**方块位置**(`x y z`)参数作为机械臂的目标位置,而不接受作用于机械臂本身的值。机械臂会先将手移至该位置,再执行动作。目标须在机械臂4格范围内,超出范围的位置会被跳过。机械臂`每16刻只接受一次`让其移动的机械臂。
-| 执行器 | 参数 | 描述 |
-| -------------------- | --------- | ----------------------------------------------------------------- |
-| `take_items` | `` | 从目标位置的容器中取出物品至机械手。 |
-| `put_items` | `` | 将机械手中的物品存入目标位置的容器。 |
-| `use` | `` | 用手持物品右击目标(放置方块、倒空/装填铁桶、使用物品等)。 |
-| `shift_use` | `` | 用手持物品潜行右击目标。 |
-| `drop_items` | `` | 在目标位置将手持物品丢出为物品实体。 |
-| `set_transfer_count` | `` | 设置`take_items`、`put_items`、`drop_items`移动的物品量(1-64)。 |
+| 执行器 | 参数 | 描述 |
+| -------------------- | --------- | ----------------------------------------------------------------------------- |
+| `take_items` | `` | 从目标位置的容器中取出物品至机械手。 |
+| `put_items` | `` | 将机械手中的物品存入目标位置的容器。 |
+| `use` | `` | 用手持物品右击目标(放置方块、倒空/装填铁桶、使用物品等)。 |
+| `shift_use` | `` | 用手持物品潜行右击目标。 |
+| `drop_items` | `` | 在目标位置将手持物品丢出为物品实体。 |
+| `break` | `` | 立即如同使用铁镐一样破坏目标方块。掉落物进入机械手。 |
+| `silk_break` | `` | 和`break`类似,但会使用精准采集铁镐,因此方块会掉落自身(玻璃、石头、矿石)。 |
+| `set_transfer_count` | `` | 设置`take_items`、`put_items`、`drop_items`移动的物品量(1-64)。 |
每一条`take_items`、`put_items`、`drop_items`指令最多只能移动机械臂GUI中指定的**运输量**(1–64),剩余的部分留在机械手中。`use`和`shift_use`会用手持物品交互,不会运输物品。
+`break`和`silk_break`只会破坏铁镐能破坏的方块;机械臂仍然会移动到无法被它破坏的方块处,只是不会破坏而已。机械手中无法容纳的掉落物会掉落在世界中。
+
例如:
```
@@ -86,6 +123,8 @@ take_items 1 3 5
put_items 0 1 2
set_transfer_count 16
drop_items 0 2 2
+break 1 1 3
+silk_break 1 2 3
```
```
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md b/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
index 1e910aca9e4c..c032b5468814 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
@@ -43,21 +43,38 @@ set_redstone value_of(redstone + 1)
下方获取器需要目标方块为放有书的`数据讲台`或原版`讲台`。
-| 获取器 | 输出 | 描述 |
-| ----------- | ------ | ------------------------------------------------------ |
-| `get_page` | Int | 书当前页的页码,从1起始。未放置书则返回`0`。 |
-| `read_page` | String | 当前页的文本内容。未放置书或当前页为空则返回空字符串。 |
+| 获取器 | 输出 | 描述 |
+| --------------- | ------ | ---------------------------------------------------------------- |
+| `page_number` | Int | 书当前页的页码,从1起始。未放置书则返回`0`。 |
+| `page_contents` | String | 当前页的文本内容,包括换行。未放置书或当前页为空则返回空字符串。 |
例如:
```
-if get_page > 3 set_redstone 15
-set_page value_of(get_page + 1)
+if page_number > 3 set_redstone 15
+set_page value_of(page_number + 1)
```
```
-if read_page == "打开" set_redstone 15
-write_page value_of(read_page + "(已编辑)")
+if page_contents == "打开" set_redstone 15
+write_page value_of(page_contents + "(已编辑)")
+```
+
+---
+
+## 脚本终端
+
+下方获取器需要目标方块为`脚本终端`。
+
+| 获取器 | 输出 | 描述 |
+| ----------------- | ------ | ------------------------------------------------------------------------------------------------------------- |
+| `script_contents` | String | 终端的脚本内容,和`.mungus`的保存格式一致:形如`# 4t REPEAT`的头部行,然后再接脚本。`load_script`可原样读回。 |
+
+例如:
+
+```
+if script_contents lines > 20 set_redstone 15
+write_page value_of(script_contents)
```
---
@@ -71,7 +88,7 @@ write_page value_of(read_page + "(已编辑)")
| `held_item` | Item | 机械手当前持有的物品。手中无物品则返回空堆叠。 |
| `transfer_count` | Int | `take_items`、`put_items`、`drop_items`能移动的最大堆叠数量。 |
-所得的Item可用`==`与物品谓词比较,也可用`count`读取堆叠的数量。
+所得的Item可用`==`与物品谓词比较,可用`count`读取堆叠的数量,也可用`id`将其ID读取为文本。
例如:
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md b/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
index 5cd406a606af..4968e47805db 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
@@ -39,12 +39,33 @@ set_redstone value_of(pos y & 15)
| 映射器 | 输出 | 描述 |
| --------------- | ------- | ---------------------------------------------- |
| `== <方块谓词>` | Boolean | 若方块状态匹配谓词(支持方块属性),则返回True |
+| `id` | String | 形如`"minecraft:stone"`的方块ID,不带其属性 |
例如:
```
if block == minecraft:stone set_redstone 15
if block == minecraft:piston[facing=up] set_redstone 15
+if block id == value_of(page_contents) set_redstone 15
+```
+
+---
+
+## Item
+
+获取自:`held_item`
+
+| 映射器 | 输出 | 描述 |
+| --------------- | ------- | ---------------------------------------------------------- |
+| `== <物品谓词>` | Boolean | 若物品匹配谓词,则返回True |
+| `count` | Int | 堆叠数量;空手返回`0` |
+| `id` | String | 形如`"minecraft:stone"`的物品ID,空手返回`"minecraft:air"` |
+
+`==`只接受脚本中写明的物品。如需比较脚本的读取和接收值,应比较`id`:
+
+```
+if held_item == minecraft:lava_bucket use 6 1 4
+if held_item id == value_of(page_contents get_line 0) use 6 1 4
```
---
@@ -101,29 +122,30 @@ if ship pos distance_to 0 0 0 > 100 set_redstone 15
## Int
-获取自:`pos x/y/z`、`redstone`、`get_page`、`double rounded_down/rounded_up`、`ship id`、`dimension index`、`string as_int`
-
-| 映射器 | 输出 | 描述 |
-| ------------ | ------- | ------------ |
-| `== ` | Boolean | 等于 |
-| `> ` | Boolean | 大于 |
-| `< ` | Boolean | 小于 |
-| `+ ` | Int | 加法 |
-| `- ` | Int | 减法 |
-| `% ` | Int | 取模 |
-| `& ` | Int | 按位与 |
-| `\| ` | Int | 按位或 |
-| `<< ` | Int | 左移 |
-| `>> ` | Int | 右移 |
-| `* ` | Double | 乘法 |
-| `/ ` | Double | 除法 |
-| `as_string` | String | 转换为字符串 |
+获取自:`pos x/y/z`、`redstone`、`page_number`、`double rounded_down/rounded_up`、`ship id`、`dimension index`、`string as_int`
+
+| 映射器 | 输出 | 描述 |
+| ------------ | ------- | ----------------------------------------------------------------- |
+| `== ` | Boolean | 等于 |
+| `> ` | Boolean | 大于 |
+| `< ` | Boolean | 小于 |
+| `+ ` | Int | 加法 |
+| `- ` | Int | 减法 |
+| `% ` | Int | 取模 |
+| `& ` | Int | 按位与 |
+| `\| ` | Int | 按位或 |
+| `<< ` | Int | 左移 |
+| `>> ` | Int | 右移 |
+| `* ` | Double | 乘法 |
+| `/ ` | Double | 除法 |
+| `as_string` | String | 转换为字符串 |
+| `as_char` | String | 编号为该数的字符(`65 as_char`为`A`);不对应字符的编号转换为空格 |
例如:
```
if redstone > 7 set_redstone 15
-set_redstone value_of(get_page - 1)
+set_redstone value_of(page_number - 1)
set_redstone value_of(pos x & 15)
```
@@ -150,32 +172,34 @@ set_redstone value_of(pos x & 15)
## String
-获取自:`read_page`、`pos as_string`、`dimension as_string`、`int as_string`、`double as_string`、`boolean as_string`、`ship slug`、`sublevel name`、`sublevel id`
+获取自:`page_contents`、`script_contents`、`pos as_string`、`dimension as_string`、`int as_string`、`int as_char`、`double as_string`、`boolean as_string`、`ship slug`、`sublevel name`、`sublevel id`
| 映射器 | 输出 | 描述 |
| ------------------- | --------- | -------------------------------------------- |
| `== ` | Boolean | 相等 |
| `+ ` | String | 拼接至结尾 |
| `<+ ` | String | 拼接至开头 |
-| `lines` | Int | 按`\n`分割,返回行数 |
-| `get_line ` | String | 按`\n`分割,返回所给索引处的行,越界返回`""` |
-| `remove_line ` | String | 按`\n`分割,移除所给索引处的行,越界不修改 |
-| `split ` | String | 将每一处所给分隔符替换为`\n` |
+| `lines` | Int | 按换行分割,返回行数 |
+| `get_line ` | String | 按换行分割,返回所给索引处的行,越界返回`""` |
+| `remove_line ` | String | 按换行分割,移除所给索引处的行,越界不修改 |
+| `split ` | String | 将每一处所给分隔符替换为换行 |
| `as_int` | Int | 解析为整数 |
| `as_double` | Double | 解析为双精度浮点数 |
| `as_block_pos` | BlockPos | 按`"x y z"`格式解析 |
| `as_boolean` | Boolean | 解析`"true"`/`"false"`(大小写不敏感) |
| `as_dimension` | Dimension | 视作维度键 |
+在引号字符串中,换行写为`\n`,`"`写为`\"`,`\`写为`\\`。仅需转义脚本文:字符串的值中包含的是真正的换行,获取器、执行器、变量则会原样传递它们。
+
例如:
```
-if read_page == "打开" set_redstone 15
+if page_contents == "打开" set_redstone 15
write_page value_of(pos as_string)
write_page value_of(pos as_string <+ "位置:")
-set_redstone value_of(read_page lines)
-write_page value_of(read_page remove_line 1)
-write_page value_of(read_page split ", ")
+set_redstone value_of(page_contents lines)
+write_page value_of(page_contents remove_line 1)
+write_page value_of(page_contents split ", ")
```
---
@@ -194,9 +218,9 @@ write_page value_of(read_page split ", ")
```
if pos x > 0 && value_of(pos z > 0) set_redstone 15
-if read_page == "打开" || value_of(redstone > 0) set_redstone 15
+if page_contents == "打开" || value_of(redstone > 0) set_redstone 15
write_page value_of(redstone > 7 as_string)
-if read_page as_boolean set_redstone 15
+if page_contents as_boolean set_redstone 15
```
---
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md b/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
index b4d9a3df7254..2f4e581a4144 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
@@ -18,7 +18,7 @@
流气只会在反应堆温度超过50,000K时反应为以太。在反应堆换热器处贴上降压变压器,即可供应FE以加热至反应温度。在换热器处贴上升压变压器,即可从反应堆中抽出热量以产出FE。
-好在变压器能够智能监控反应堆。也就是说,它们只会在反应堆温度低于55,000K时提供FE,且只会在反应堆温度高于55,000K时抽出FE。因此一直贴着FE输入端和输出端不会有影响,不必担心变压器的启停。
+好在换热器能够智能监控反应堆。也就是说,它们只会在反应堆温度低于55,000K时接受FE,且只会在反应堆温度高于55,000K时产出FE。因此一直贴着FE输入端和输出端不会有影响,不必担心变压器的启停。
## 监控反应
@@ -37,11 +37,11 @@ Forge能量的输入输出会自行调控,反应堆的温度和压力却不会
## 小贴士#1
-为启动反应堆,你应当先将以太留在仓室内(也即用最强的红石信号禁用输出端口)。随后再灌入流气,并通过网络提供FE加热。开始时最好能限制流气的注入速度;这是因为加热少量气体的消耗不大,也能借此避免流气升温导致压力过高爆炸。
+为启动反应堆,你应当先将以太留在仓室内(也即不通入红石信号以封闭输出端口)。随后再灌入流气,并通过网络提供FE加热。开始时最好能限制流气的注入速度;这是因为加热少量气体的消耗不大,也能借此避免流气升温导致压力过高爆炸。
达到50,000K后反应就会启动。反应堆会极其迅速地升温;希望以太的累积速度足够快,快到能阻止反应堆失控熔毁。
-当反应达到稳定状态并逐渐减弱(因为以太过多)时,就可以排出以太了。可以向输出端口通入模拟(即在0到15之间)红石信号控制排出速率。排气的速率不应过快也不应过慢。
+当反应达到稳定状态并逐渐减弱(因为以太过多)时,就可以排出以太了。可以向输出端口通入模拟(即在0到15之间)红石信号控制排出速率:信号越强,端口就敞开得越多。排气的速率不应过快也不应过慢。
## 小贴士#2
@@ -49,7 +49,7 @@ Forge能量的输入输出会自行调控,反应堆的温度和压力却不会
由于反应堆只会因变压器不再抽取能量而升温,热量便只会在能量网络已满时过剩。
-出现这种情况时也不必完全关停反应堆,而是只需(使用最强的红石信号)完全关闭流气输入端口和以太输出端口。反应堆会停止升温,转而极为缓慢地降温,应当能在反应温度(50,000K)以上保持很长时间。
+出现这种情况时也不必完全关停反应堆,而是只需完全关闭流气输入端口和以太输出端口(去除红石信号)。反应堆会停止升温,转而极为缓慢地降温,应当能在反应温度(50,000K)以上保持很长时间。
在某些少见情景下反应堆会降至50,000K以下,此时再次启动反应堆即可。只要降压变压器仍能供能,且流气/以太供应稳定,反应堆就有一定可能自行重启。
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md b/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md
index 5ea772584145..6ebdd85d2610 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/syntax.md
@@ -96,6 +96,8 @@ wait 2
set_redstone 0
```
+`<周期数>`为从1到64的整数。提供其他数或不提供数,都会转而延迟1个周期。
+
`wait`的表现和执行器一样,但无法在`if`、`unless`、`else`处使用。
只要遇到该命令,就必定会执行,且会延迟后续命令的发送。
@@ -165,7 +167,7 @@ set_redstone value_of(pos y - 50)
在脚本顶部使用`#def <名称> = <表达式>`,可为获取器→映射器链指定可重用的名称:
```
-#def first_line = read_page get_line 1
+#def first_line = page_contents get_line 1
write_page value_of(first_line)
```
@@ -177,8 +179,8 @@ write_page value_of(first_line)
别称中可以使用之前声明的别称:
```
-#def line_1 = read_page get_line 1
-#def line_2 = read_page get_line 2
+#def line_1 = page_contents get_line 1
+#def line_2 = page_contents get_line 2
#def combined = line_2 + "\n" + value_of(line_1)
write_page value_of(combined)
@@ -189,3 +191,46 @@ write_page value_of(combined)
别称声明体必须以获取器或之前定义的别称起始,这之后才可接上映射器。
---
+
+## 变量
+
+变量是可在脚本终端行间保持的值。可以向串行总线请求值,终端会保存它,以供之后的行对网络中的任意总线使用。
+
+可用`#var <名称> = <字面量>`声明一个变量:
+
+```
+#var page = 1
+```
+
+- 值必须为字面量:数,`true`或`false`,字符串。获取器和映射器需使用`#def`。
+- 变量的类型不固定:和字面量别称一样,它当前的值是什么类型,它就是什么类型。不符合所在位置需求的值会在该行出错,和其他命令类似。
+- 名称需遵守的规则和别称的一致。变量无法重复声明,且其名称不得与别称重复:脚本中后出现的会被视作错误。
+
+变量和别称一样可用在表达式的开头。各行在发送时会附带变量当时的值,这样所有总线使用的值就是一样的。别称中可以使用在其上方声明的变量,并会按同样方式取其值。
+
+```
+set_redstone value_of(page)
+if page > 8 set_redstone 15 else set_redstone 0
+```
+
+### 向串行总线请求值
+
+终端发出的所有命令都会在数据线缆中留存1刻,随后线缆会进入空闲状态,直至发出下一条命令为止。总线可在线缆空闲时回应:
+
+- `request_value <值>`是执行器。执行它的总线会在线缆进入空闲状态时向线缆发送值,留存1刻。可用`if pos == ...`指定让哪一个总线回应。
+- `receive_value <名称>`会将上一条命令收到的值存入在其上方声明的变量。终端能将该值暂存到下一次发出命令。和`wait`类似,该命令也只能在脚本终端中使用,且无法和`if`、`unless`、`else`配合。但和`wait`不同的是,该命令的执行不会消耗时间;它后方的行会立即执行。循环脚本每次发送间仍会至少等待2刻,无论其中有多少执行不消耗时间的行。
+
+```
+#var page = 1
+if pos == @lectern request_value value_of(page_number)
+receive_value page
+if pos == @lamp set_redstone value_of(page)
+```
+
+`wait`和`receive_value`不会发送任何东西,因此在`request_value`和`receive_value`之间使用`wait`不会导致收到的值被丢弃。
+
+`receive_value`会存储回应的值,无论值具体是什么。没有回应时,或有超过一个总线回应时,均不会改动变量:同一时间的两个回应相当于两个发送端,因此会相互碰撞。
+
+变量会在循环间保留其值;编辑脚本后,以及通入红石信号后的第一次发送时,变量会重置为其声明值。
+
+---
diff --git a/projects/assets/zps/1.21/zps/lang/en_us.json b/projects/assets/zps/1.21/zps/lang/en_us.json
index fe15859c7642..ef3c8e732291 100644
--- a/projects/assets/zps/1.21/zps/lang/en_us.json
+++ b/projects/assets/zps/1.21/zps/lang/en_us.json
@@ -1,4 +1,5 @@
{
+ "biome.zps.overworld_atmosphere": "Overworld Atmosphere",
"block.zps.cable": "Cable",
"block.zps.dense_cables": "Dense Cables",
"block.zps.dense_cable_separator": "Dense Cable Separator",
@@ -14,6 +15,9 @@
"block.zps.rolling_mill": "Rolling Mill",
"block.zps.assembler": "Assembler",
"block.zps.impact_piston": "Impact Piston",
+ "block.zps.launch_platform": "Launch Platform",
+ "block.zps.launch_platform.too_big": "Too big to launch: %sx%sx%s (max %sx%sx%s)",
+ "block.zps.thruster": "Thruster",
"block.zps.composter_dirt": "Dirt-Filled Composter",
"block.zps.sieve": "Sieve",
"block.zps.vaporizer": "Vaporizer",
@@ -29,6 +33,13 @@
"gui.zps.vaporizer.gas_temperature": "Temperature: %s",
"gui.zps.vaporizer.gas_pressure": "Pressure: %s",
"jei.zps.vaporizing.temperature_cost": "Temperature Cost: %s K",
+ "jei.zps.rolling.time": "%ss",
+ "jei.zps.thruster.burn_rate": "Burn Rate: %s/s",
+ "jei.zps.thruster.thrust": "Thrust: %s N",
+ "jei.zps.thruster.per_second": "Per second at a full signal",
+ "jei.zps.thruster.leaves_hot": "Leaves at %s K",
+ "jei.zps.thruster.leaves_unburnt": "Leaves unburnt, at the feed's temperature",
+ "block.zps.air_compressor": "Air Compressor",
"block.zps.vent": "Vent",
"block.zps.gas_gauge": "Gas Gauge",
"gui.zps.gas_gauge.mode": "Reading %s",
@@ -66,6 +77,7 @@
"gui.zps.jei.shaped_5x5": "5x5 Crafting",
"gui.zps.jei.impact": "Impact Piston",
"gui.zps.jei.impact.may_contain": "May contain:",
+ "gui.zps.jei.impact.chance": "%s chance",
"gui.zps.jei.impact.requires_state": "Requires %s: %s",
"gui.zps.jei.transfer_unsupported": "The Assembler can't lay out this recipe.",
"block.zps.octo_controller": "Octo-Controller",
@@ -113,6 +125,9 @@
"block.zps.raw_lithium_block": "Block of Raw Lithium",
"block.zps.space_truss": "Space Truss",
"block.zps.space_scaffold": "Space Scaffold",
+ "block.zps.space_metal_ladder": "Space Metal Ladder",
+ "block.zps.space_door": "Space Door",
+ "block.zps.large_space_door": "Large Space Door",
"block.zps.space_mesh_block": "Space Mesh Block",
"block.zps.space_grating_block": "Space Grating Block",
"block.zps.catwalk": "Catwalk",
@@ -276,6 +291,11 @@
"item.zps.script_book": "Script Commands Manual",
"item.zps.space_truss": "Space Truss",
"item.zps.space_scaffold": "Space Scaffold",
+ "item.zps.space_metal_ladder": "Space Metal Ladder",
+ "item.zps.space_door": "Space Door",
+ "item.zps.large_space_door": "Large Space Door",
+ "message.zps.large_space_door.locked": "Door locked",
+ "message.zps.large_space_door.unlocked": "Door unlocked",
"item.zps.space_mesh_block": "Space Mesh Block",
"item.zps.space_grating_block": "Space Grating Block",
"item.zps.catwalk": "Catwalk",
@@ -362,7 +382,6 @@
"item.zps.agate_space_plating_stairs": "Agate Space Plating Stairs",
"item.zps.agate_space_plating_slab": "Agate Space Plating Slab",
"item.zps.agate_space_plating_wall": "Agate Space Plating Wall",
- "item.zps.redstone_wand": "Redstone Wand",
"zps.manual.group.networks": "Data Networks",
"zps.manual.group.language": "Script Language",
"zps.manual.group.integrations": "Integrations",
@@ -384,19 +403,6 @@
"creativetab.zps_tab": "Zero Point Systems",
- "key.zps.a": "Channel A",
- "key.zps.b": "Channel B",
- "key.zps.c": "Channel C",
- "key.zps.d": "Channel D",
- "key.zps.e": "Channel E",
- "key.zps.f": "Channel F",
- "key.zps.g": "Channel G",
- "key.zps.h": "Channel H",
- "key.zps.i": "Channel I",
- "key.zps.j": "Channel J",
- "key.zps.k": "Channel K",
- "key.zps.l": "Channel L",
- "key.categories.zps": "Zero Point Systems",
"zps.ponder.cable.header": "Cables",
@@ -424,7 +430,9 @@
"zps.ponder.octo_controller.header": "Octo-Controller",
"zps.ponder.octo_controller.text_1": "Interact with an Octo-Controller to control it.",
- "zps.ponder.octo_controller.text_2": "Use arrow keys and WASD to control the 8 redstone outputs.",
+ "zps.ponder.octo_controller.text_2": "By default, WASD and Space, Q, Left Shift and E control the 8 redstone outputs.",
+ "zps.ponder.octo_controller.text_3": "Interact with the controller again to step off.",
+ "zps.ponder.octo_controller.text_4": "Sneak and interact with an empty hand to choose the key for each output.",
"zps.ponder.data_cable.header": "Data Cables",
"zps.ponder.data_cable.text_1": "Data Cables send information as text between compatible blocks.",
@@ -444,6 +452,12 @@
"zps.ponder.data_transcriber.text_2": "When powered, it will copy the input Data to the current page of the book below.",
"zps.ponder.data_transcriber.text_3": "If the input Data changes while the Data Transcriber is powered, it will turn to the next page and then write the new Data.",
+ "zps.ponder.launch_platform.header": "Launching Ships",
+ "zps.ponder.launch_platform.text_1": "Launch Platforms turn what is built on them into a ship.",
+ "zps.ponder.launch_platform.text_2": "A tower of upright Space Truss beside the platforms sets how tall the ship can be.",
+ "zps.ponder.launch_platform.text_3": "Sneak and look at a platform to see what will be launched.",
+ "zps.ponder.launch_platform.text_4": "Power a platform with redstone to launch.",
+
"zps.ponder.robotic_arm.header": "Robotic Arm",
"zps.ponder.robotic_arm.text_1": "The Robotic Arm can interact with and move items between nearby blocks.",
"zps.ponder.robotic_arm.text_2": "While active, the arm consumes 8 FE per tick.",
@@ -538,6 +552,8 @@
"block.zps.coal_burner.zps_tooltip": "Burns furnace fuel to generate %s FE/tick.",
"block.zps.rolling_mill.zps_tooltip": "Consumes FE to roll metal.\n\nRolls ingots into rods and nuggets into wire.",
"block.zps.vaporizer.zps_tooltip": "Consumes FE to heat up, then vaporizes items into gas.\n\nEach recipe needs a minimum temperature and cools the machine when it runs. The gas collects in an internal buffer and leaves through the top.",
+ "block.zps.air_compressor.zps_tooltip": "Consumes 32 FE/tick to draw gas from the environment through the fan on top.\n\nTurns off when receiving a redstone signal.",
+ "block.zps.thruster.zps_tooltip": "Consumes [gas] to push the ship it's on.\n\nSee the JEI category for fuel properties.\n\nActivates with a redstone signal.",
"block.zps.vent.zps_tooltip": "Releases gas from a [Gas Duct] into the air to prevent pressure buildup.\n\nCloses when receiving a redstone signal.\n\n[R-Click] an open vent to climb inside.\nEntering a vent with very hot or very cold gas can be dangerous.",
"block.zps.assembler.zps_tooltip": "Consumes FE to craft items in a [5x5 crafting grid].\n\nConsumes 16 FE/t while crafting, and works only when receiving a Redstone signal.",
"block.zps.impact_piston.zps_tooltip": "Consumes FE to slam a heavy rod into the block underneath.\n\nConsumes 64 FE/t while raising the rod, and works only when receiving a Redstone signal.",
@@ -566,8 +582,14 @@
"sounds.zps.impact_thunk": "Impact Piston lands",
"sounds.zps.impact_anvil_break": "Anvil shatters",
"sounds.zps.reactor_hum": "Reactor hums",
+ "sounds.zps.thruster": "Thruster roars",
"zps.duct.sealed": "The vent is sealed shut.",
+ "zps.controller.side.left": "Left",
+ "zps.controller.side.right": "Right",
+ "zps.controller.side.back": "Back",
+ "zps.controller.side.down": "Down",
+ "zps.controller.mount_hint": "Press %s on the Controller again to Dismount",
"zps.duct.mount_hint": "Press %s to Exit, %s/%s to Crawl Through",
"zps.duct.hud.title": "Vent %s / %s",
"zps.duct.hud.entry": "%s, %s, %s \u00b7 where you got in",
diff --git a/projects/assets/zps/1.21/zps/lang/zh_cn.json b/projects/assets/zps/1.21/zps/lang/zh_cn.json
index 87dd6c681050..587d179510b1 100644
--- a/projects/assets/zps/1.21/zps/lang/zh_cn.json
+++ b/projects/assets/zps/1.21/zps/lang/zh_cn.json
@@ -1,4 +1,5 @@
{
+ "biome.zps.overworld_atmosphere": "主世界大气层",
"block.zps.cable": "线缆",
"block.zps.dense_cables": "致密线缆",
"block.zps.dense_cable_separator": "致密线缆分接器",
@@ -14,6 +15,9 @@
"block.zps.rolling_mill": "轧机",
"block.zps.assembler": "组装机",
"block.zps.impact_piston": "冲击活塞",
+ "block.zps.launch_platform": "发射平台",
+ "block.zps.launch_platform.too_big": "过大,无法发射:%sx%sx%s(最大%sx%sx%s)",
+ "block.zps.thruster": "推进器",
"block.zps.composter_dirt": "装满泥土的堆肥桶",
"block.zps.sieve": "筛子",
"block.zps.vaporizer": "汽化机",
@@ -29,6 +33,13 @@
"gui.zps.vaporizer.gas_temperature": "温度:%s",
"gui.zps.vaporizer.gas_pressure": "压力:%s",
"jei.zps.vaporizing.temperature_cost": "温度消耗:%s K",
+ "jei.zps.rolling.time": "%ss",
+ "jei.zps.thruster.burn_rate": "燃烧速率:%s/s",
+ "jei.zps.thruster.thrust": "推力:%s N",
+ "jei.zps.thruster.per_second": "每秒(红石信号强度最强时)",
+ "jei.zps.thruster.leaves_hot": "喷出时为%s K",
+ "jei.zps.thruster.leaves_unburnt": "不燃烧即喷出,温度与输入相同",
+ "block.zps.air_compressor": "空气压缩机",
"block.zps.vent": "排气口",
"block.zps.gas_gauge": "气体仪表",
"gui.zps.gas_gauge.mode": "正在读取%s",
@@ -66,6 +77,7 @@
"gui.zps.jei.shaped_5x5": "5x5合成",
"gui.zps.jei.impact": "冲击活塞",
"gui.zps.jei.impact.may_contain": "可能含有:",
+ "gui.zps.jei.impact.chance": "%s概率",
"gui.zps.jei.impact.requires_state": "需要%s为:%s",
"gui.zps.jei.transfer_unsupported": "组装机无法接受此配方。",
"block.zps.octo_controller": "八缆控制器",
@@ -113,6 +125,9 @@
"block.zps.raw_lithium_block": "粗锂块",
"block.zps.space_truss": "太空桁架",
"block.zps.space_scaffold": "太空脚手架",
+ "block.zps.space_metal_ladder": "太空金属梯子",
+ "block.zps.space_door": "太空门",
+ "block.zps.large_space_door": "大型太空门",
"block.zps.space_mesh_block": "太空纱网方块",
"block.zps.space_grating_block": "太空格栅方块",
"block.zps.catwalk": "施工步道",
@@ -276,6 +291,11 @@
"item.zps.script_book": "脚本命令手册",
"item.zps.space_truss": "太空桁架",
"item.zps.space_scaffold": "太空脚手架",
+ "item.zps.space_metal_ladder": "太空金属梯子",
+ "item.zps.space_door": "太空门",
+ "item.zps.large_space_door": "大型太空门",
+ "message.zps.large_space_door.locked": "门已锁",
+ "message.zps.large_space_door.unlocked": "门已解锁",
"item.zps.space_mesh_block": "太空纱网方块",
"item.zps.space_grating_block": "太空格栅方块",
"item.zps.catwalk": "施工步道",
@@ -362,7 +382,6 @@
"item.zps.agate_space_plating_stairs": "玛瑙色太空镶板楼梯",
"item.zps.agate_space_plating_slab": "玛瑙色太空镶板台阶",
"item.zps.agate_space_plating_wall": "玛瑙色太空镶板墙",
- "item.zps.redstone_wand": "红石棒",
"zps.manual.group.networks": "数据网络",
"zps.manual.group.language": "脚本语言",
"zps.manual.group.integrations": "兼容",
@@ -384,19 +403,6 @@
"creativetab.zps_tab": "零点系统",
- "key.zps.a": "频道A",
- "key.zps.b": "频道B",
- "key.zps.c": "频道C",
- "key.zps.d": "频道D",
- "key.zps.e": "频道E",
- "key.zps.f": "频道F",
- "key.zps.g": "频道G",
- "key.zps.h": "频道H",
- "key.zps.i": "频道I",
- "key.zps.j": "频道J",
- "key.zps.k": "频道K",
- "key.zps.l": "频道L",
- "key.categories.zps": "零点系统(Zero Point Systems)",
"zps.ponder.cable.header": "线缆",
@@ -424,7 +430,9 @@
"zps.ponder.octo_controller.header": "八缆控制器",
"zps.ponder.octo_controller.text_1": "与八缆控制器交互以进入控制模式。",
- "zps.ponder.octo_controller.text_2": "使用方向键和WASD来控制8个红石输出。",
+ "zps.ponder.octo_controller.text_2": "默认情况下,可使用WASD、空格、Q、左Shift、E来控制8个红石输出。",
+ "zps.ponder.octo_controller.text_3": "再次与控制器交互可离座。",
+ "zps.ponder.octo_controller.text_4": "潜行空手交互来选择各输出分别由哪些键控制。",
"zps.ponder.data_cable.header": "数据线缆",
"zps.ponder.data_cable.text_1": "数据线缆能在兼容的方块间以文本形式传输信息。",
@@ -444,6 +452,12 @@
"zps.ponder.data_transcriber.text_2": "通入红石信号时,它会将输入数据复制到下方书的当前页中。",
"zps.ponder.data_transcriber.text_3": "若输入数据在有红石信号时发生了改变,数据转录器会将书翻到下一页,再写入新数据。",
+ "zps.ponder.launch_platform.header": "发射飞船",
+ "zps.ponder.launch_platform.text_1": "发射平台能将其上搭建的结构变为飞船。",
+ "zps.ponder.launch_platform.text_2": "平台旁竖直的太空桁架决定了飞船的最大高度。",
+ "zps.ponder.launch_platform.text_3": "潜行看向平台可查看它会发射什么。",
+ "zps.ponder.launch_platform.text_4": "通入红石信号可发射飞船。",
+
"zps.ponder.robotic_arm.header": "机械臂",
"zps.ponder.robotic_arm.text_1": "机械臂能与周围方块交互,也能在周围方块间移动物品。",
"zps.ponder.robotic_arm.text_2": "激活时,机械臂每刻消耗8 FE。",
@@ -538,6 +552,8 @@
"block.zps.coal_burner.zps_tooltip": "燃烧熔炉燃料以产生%s FE/t。",
"block.zps.rolling_mill.zps_tooltip": "消耗FE以轧制金属。\n\n锭会被轧制为棒,粒会被轧制为线。",
"block.zps.vaporizer.zps_tooltip": "消耗FE以加热,随后将物品汽化为气体。\n\n每个配方都有所需的最小温度,且会在运行配方时冷却机器。所得气体会暂存在内部的缓存中,可从上方抽出。",
+ "block.zps.air_compressor.zps_tooltip": "消耗32 FE/t通过顶部风扇从环境中抽取气体。\n\n通入红石信号可关闭。",
+ "block.zps.thruster.zps_tooltip": "消耗[气体]来推动它所在的飞船。\n\n燃料属性参见JEI配方类别。\n\n通入红石信号来激活。",
"block.zps.vent.zps_tooltip": "向外界释放[气体管道]中的气体以避免压力过大。\n\n通入红石信号可封堵。\n\n[右击]开放的排气口可钻入管道。\n钻入内有高温或低温气体的管道很危险。",
"block.zps.assembler.zps_tooltip": "消耗FE以在[5x5合成方格]中合成物品。\n\n合成时消耗16 FE/t,且仅会在有红石信号时运作。",
"block.zps.impact_piston.zps_tooltip": "消耗FE以让沉重的衔铁撞击下方方块。\n\n升起衔铁时消耗64 FE/t,且仅会在有红石信号时运作。",
@@ -566,8 +582,14 @@
"sounds.zps.impact_thunk": "冲击活塞:撞击",
"sounds.zps.impact_anvil_break": "铁砧:破裂",
"sounds.zps.reactor_hum": "反应堆:嗡鸣",
+ "sounds.zps.thruster": "推进器:轰鸣",
"zps.duct.sealed": "该排气口已被封住。",
+ "zps.controller.side.left": "左",
+ "zps.controller.side.right": "右",
+ "zps.controller.side.back": "后",
+ "zps.controller.side.down": "下",
+ "zps.controller.mount_hint": "在控制器中再次按下%s来脱离",
"zps.duct.mount_hint": "按下%s来退出,按下%s/%s来钻入",
"zps.duct.hud.title": "排气口 %s / %s",
"zps.duct.hud.entry": "%s, %s, %s \u00b7 进入位置",
From 4a254a3c33070183da608b86a9f31926048d1375 Mon Sep 17 00:00:00 2001
From: ChuijkYahus <94828194+ChuijkYahus@users.noreply.github.com>
Date: Mon, 9 Nov 2026 08:13:06 +0800
Subject: [PATCH 3/4] ZPS fix
---
.../assets/zps/1.21/zps/doc/zh_cn/getters.md | 2 +-
.../assets/zps/1.21/zps/doc/zh_cn/reactors.md | 10 +++----
projects/assets/zps/1.21/zps/lang/zh_cn.json | 28 +++++++++----------
3 files changed, 20 insertions(+), 20 deletions(-)
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md b/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
index c032b5468814..829c111456e4 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/getters.md
@@ -145,7 +145,7 @@ if stored_energy < 100000 set_redstone 15 else set_redstone 0
| 获取器 | 输出 | 描述 |
| ------------- | ------ | ------------------------------------------------------------------------------------------------------------------------ |
-| `gauge_value` | Double | 仪表的读数:压力单位为帕斯卡,温度单位为开尔文。所得值不会缩放,也不会根据仪表数据范围截断。更改仪表模式会改变所读数据。 |
+| `gauge_value` | Double | 仪表的读数:压强单位为帕斯卡,温度单位为开尔文。所得值不会缩放,也不会根据仪表数据范围截断。更改仪表模式会改变所读数据。 |
例如:
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md b/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
index 2f4e581a4144..243dd6c14b44 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/reactors.md
@@ -22,22 +22,22 @@
## 监控反应
-Forge能量的输入输出会自行调控,反应堆的温度和压力却不会。反应堆有许多种失效场景,包括:
+Forge能量的输入输出会自行调控,反应堆的温度和压强却不会。反应堆有许多种失效场景,包括:
1. 熔毁(内部热量超过**200,000K**)
-2. 因压力爆炸(内部压力超过**24MPa**)
+2. 因压强爆炸(内部压强超过**24MPa**)
3. 完整性缺失(你的朋友“意外”破坏了仓壁)
从反应堆抽出FE时,其中热量*会*减少。但假如你的机器里装满了FE(比如你的电池组都满了),换热器便*不会*再将热量转换为FE。此时你的反应堆会开始剧烈升温,通常会导致熔毁。
## 理解气体
-随着流气反应形成以太,反应堆内部的压力也会上升。不过,以太其实会*抑制*反应。换言之,反应堆中的以太越多,流气就反应得越少。
+随着流气反应形成以太,反应堆内部的压强也会上升。不过,以太其实会*抑制*反应。换言之,反应堆中的以太越多,流气就反应得越少。
-压力因此在大体上能自行调控,但该效应也有负面作用。反应堆会被以太塞满,无法再产出足量的热。为此,你需要将以太泵*出*反应堆。
+压强因此在大体上能自行调控,但该效应也有负面作用。反应堆会被以太塞满,无法再产出足量的热。为此,你需要将以太泵*出*反应堆。
## 小贴士#1
-为启动反应堆,你应当先将以太留在仓室内(也即不通入红石信号以封闭输出端口)。随后再灌入流气,并通过网络提供FE加热。开始时最好能限制流气的注入速度;这是因为加热少量气体的消耗不大,也能借此避免流气升温导致压力过高爆炸。
+为启动反应堆,你应当先将以太留在仓室内(也即不通入红石信号以封闭输出端口)。随后再灌入流气,并通过网络提供FE加热。开始时最好能限制流气的注入速度;这是因为加热少量气体的消耗不大,也能借此避免流气升温导致压强过高爆炸。
达到50,000K后反应就会启动。反应堆会极其迅速地升温;希望以太的累积速度足够快,快到能阻止反应堆失控熔毁。
diff --git a/projects/assets/zps/1.21/zps/lang/zh_cn.json b/projects/assets/zps/1.21/zps/lang/zh_cn.json
index 587d179510b1..4d04ba95b800 100644
--- a/projects/assets/zps/1.21/zps/lang/zh_cn.json
+++ b/projects/assets/zps/1.21/zps/lang/zh_cn.json
@@ -31,7 +31,7 @@
"gui.zps.vaporizer.gas_empty": "空",
"gui.zps.vaporizer.gas_line": "%s:%s",
"gui.zps.vaporizer.gas_temperature": "温度:%s",
- "gui.zps.vaporizer.gas_pressure": "压力:%s",
+ "gui.zps.vaporizer.gas_pressure": "压强:%s",
"jei.zps.vaporizing.temperature_cost": "温度消耗:%s K",
"jei.zps.rolling.time": "%ss",
"jei.zps.thruster.burn_rate": "燃烧速率:%s/s",
@@ -44,7 +44,7 @@
"block.zps.gas_gauge": "气体仪表",
"gui.zps.gas_gauge.mode": "正在读取%s",
"gui.zps.gas_gauge.reading": "%s:%s",
- "gui.zps.gas_gauge.mode.pressure": "压力",
+ "gui.zps.gas_gauge.mode.pressure": "压强",
"gui.zps.gas_gauge.mode.temperature": "温度",
"block.zps.gas_duct": "气体管道",
"block.zps.creative_gas_generator": "创造气体生成器",
@@ -478,7 +478,7 @@
"zps.ponder.reactor_intro.text_6": "在收到红石信号前,反应堆端口保持关闭;信号越强,端口开得越大……",
"zps.ponder.reactor_intro.text_7": "……直到达到最大强度,端口完全敞开。",
"zps.ponder.reactor_intro.text_8": "换热器能将FE转换为仓室内的热量,也能将热量转换回FE。",
- "zps.ponder.reactor_intro.text_9": "当气体管道压力大于仓室压力时,流气会通过输入端口进入反应堆。",
+ "zps.ponder.reactor_intro.text_9": "当气体管道压强大于仓室压强时,流气会通过输入端口进入反应堆。",
"zps.ponder.reactor_intro.text_10": "反应流气前需先加热。",
"zps.ponder.reactor_intro.text_11": "向换热器供应FE,可加热仓室中的气体……",
"zps.ponder.reactor_intro.text_12": "……达到50,000 K后,流气会聚变为以太,同时释放大量热量。",
@@ -493,7 +493,7 @@
"zps.ponder.reactor_monitoring.text_2": "reactor_pressure",
"zps.ponder.reactor_monitoring.text_3": "reactor_temperature",
"zps.ponder.reactor_monitoring.text_4": "reactor_output",
- "zps.ponder.reactor_monitoring.text_5": "压力的单位是Pa,温度的是K,输出的是FE每刻。",
+ "zps.ponder.reactor_monitoring.text_5": "压强的单位是Pa,温度的是K,输出的是FE每刻。",
"zps.ponder.reactor_monitoring.text_6": "这些数据能帮你理解反应堆当前的状态,也能用于避免反应堆失效。",
"zps.ponder.reactor_overheating.header": "避免聚变反应堆过热",
@@ -508,24 +508,24 @@
"zps.ponder.reactor_bursting.header": "避免聚变反应堆爆炸",
"zps.ponder.reactor_bursting.text_1": "聚变反应堆会在仓室气压超过24 MPa时爆炸。",
- "zps.ponder.reactor_bursting.text_2": "仓室中的压力会随温度一同升降。",
- "zps.ponder.reactor_bursting.text_3": "装满冷流气的仓室在点火时,其压力能超过原先的一百倍……",
+ "zps.ponder.reactor_bursting.text_2": "仓室中的压强会随温度一同升降。",
+ "zps.ponder.reactor_bursting.text_3": "装满冷流气的仓室在点火时,其压强能超过原先的一百倍……",
"zps.ponder.reactor_bursting.text_4": "……也即会在还远未达到点火温度时就爆炸。",
"zps.ponder.reactor_bursting.text_5": "点火前,应向输入端口通入强度较低的红石信号,将流气的输入量限制在极低。",
"zps.ponder.reactor_bursting.text_6": "反应堆点火后,可重新敞开输入端口。",
- "zps.ponder.reactor_bursting.text_7": "过热反应堆内部的压力也会增加,有可能在仓壁烧毁前就爆炸。",
+ "zps.ponder.reactor_bursting.text_7": "过热反应堆内部的压强也会增加,有可能在仓壁烧毁前就爆炸。",
"zps.ponder.gas_duct.header": "气体管道",
"zps.ponder.gas_duct.text_1": "气体管道能在方块间运输气体。",
- "zps.ponder.gas_duct.text_2": "气体的模拟带有压力和温度。它们会从高压处流向低压处,因此会在管道在逐渐散布开去。",
+ "zps.ponder.gas_duct.text_2": "气体的模拟带有压强和温度。它们会从高压处流向低压处,因此会在管道在逐渐散布开去。",
"zps.ponder.gas_duct.text_3": "每一种气体都有其密度和热容,不同气体在相同管道中的表现不同。",
- "zps.ponder.gas_duct.text_4": "气体仪表能读取它所在管道的气体压力。",
+ "zps.ponder.gas_duct.text_4": "气体仪表能读取它所在管道的气体压强。",
"zps.ponder.gas_duct.text_5": "潜行点击可让其改为读取温度。",
- "zps.ponder.gas_duct.text_6": "气体管道会在压力超过16.4 MPa时破裂,也会在温度超过1,478 K时损毁。",
+ "zps.ponder.gas_duct.text_6": "气体管道会在压强超过16.4 MPa时破裂,也会在温度超过1,478 K时损毁。",
"zps.ponder.gas_duct.text_7": "仪表的数据范围与之相符。表针指向仪表末尾代表管道达到了承受极限。",
- "zps.ponder.gas_duct.text_8": "随着气体灌入而无法排出,压力会不断上升至管道爆炸。",
+ "zps.ponder.gas_duct.text_8": "随着气体灌入而无法排出,压强会不断上升至管道爆炸。",
"zps.ponder.gas_duct.text_9": "裂口周围的管道不会自行闭合。它们会不断向外界漏气,直到在它们旁边放置气体管道才停止。",
- "zps.ponder.gas_duct.text_10": "管道线路末端的排气口会向外界排气,这样压力就永远不会达到承受极限。",
+ "zps.ponder.gas_duct.text_10": "管道线路末端的排气口会向外界排气,这样压强就永远不会达到承受极限。",
"zps.ponder.tag.can_insulate": "可被绝缘的方块",
@@ -554,7 +554,7 @@
"block.zps.vaporizer.zps_tooltip": "消耗FE以加热,随后将物品汽化为气体。\n\n每个配方都有所需的最小温度,且会在运行配方时冷却机器。所得气体会暂存在内部的缓存中,可从上方抽出。",
"block.zps.air_compressor.zps_tooltip": "消耗32 FE/t通过顶部风扇从环境中抽取气体。\n\n通入红石信号可关闭。",
"block.zps.thruster.zps_tooltip": "消耗[气体]来推动它所在的飞船。\n\n燃料属性参见JEI配方类别。\n\n通入红石信号来激活。",
- "block.zps.vent.zps_tooltip": "向外界释放[气体管道]中的气体以避免压力过大。\n\n通入红石信号可封堵。\n\n[右击]开放的排气口可钻入管道。\n钻入内有高温或低温气体的管道很危险。",
+ "block.zps.vent.zps_tooltip": "向外界释放[气体管道]中的气体以避免压强过大。\n\n通入红石信号可封堵。\n\n[右击]开放的排气口可钻入管道。\n钻入内有高温或低温气体的管道很危险。",
"block.zps.assembler.zps_tooltip": "消耗FE以在[5x5合成方格]中合成物品。\n\n合成时消耗16 FE/t,且仅会在有红石信号时运作。",
"block.zps.impact_piston.zps_tooltip": "消耗FE以让沉重的衔铁撞击下方方块。\n\n升起衔铁时消耗64 FE/t,且仅会在有红石信号时运作。",
"block.zps.sieve.zps_tooltip": "玩家和生物可站在其上,其他实体均会穿过它下落。\n\n下落的方块会被[过筛]:其中埋藏着的战利品会收集至筛子中。",
@@ -607,7 +607,7 @@
"zps.display_source.reactor.empty": "空",
"zps.display_source.reactor.cold": "过冷",
"zps.display_source.reactor.lit": "已点火",
- "zps.display_source.reactor.pressure": "压力",
+ "zps.display_source.reactor.pressure": "压强",
"zps.display_source.reactor.pressure_dots": "... ",
"zps.display_source.reactor.temperature": "热量",
"zps.display_source.reactor.temperature_dots": "................ ",
From 8d9312ef5f063ea9404b9b09bed0133293946efd Mon Sep 17 00:00:00 2001
From: ChuijkYahus <94828194+ChuijkYahus@users.noreply.github.com>
Date: Tue, 17 Nov 2026 15:58:03 +0800
Subject: [PATCH 4/4] =?UTF-8?q?ZPS=20Kelvin=20update=EF=BC=9A=E7=89=88?=
=?UTF-8?q?=E6=9C=AC=E6=9B=B4=E6=96=B0?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
---
.../kelvin-vs/1.21/kelvin/lang/en_us.json | 7 ++
.../kelvin-vs/1.21/kelvin/lang/zh_cn.json | 7 ++
.../assets/zps/1.21/zps/doc/en_us/genesis.md | 69 +++++++++++++++++++
.../assets/zps/1.21/zps/doc/zh_cn/genesis.md | 69 +++++++++++++++++++
.../assets/zps/1.21/zps/doc/zh_cn/mappers.md | 8 +--
projects/assets/zps/1.21/zps/lang/en_us.json | 21 +++++-
projects/assets/zps/1.21/zps/lang/zh_cn.json | 21 +++++-
7 files changed, 194 insertions(+), 8 deletions(-)
create mode 100644 projects/assets/kelvin-vs/1.21/kelvin/lang/en_us.json
create mode 100644 projects/assets/kelvin-vs/1.21/kelvin/lang/zh_cn.json
create mode 100644 projects/assets/zps/1.21/zps/doc/en_us/genesis.md
create mode 100644 projects/assets/zps/1.21/zps/doc/zh_cn/genesis.md
diff --git a/projects/assets/kelvin-vs/1.21/kelvin/lang/en_us.json b/projects/assets/kelvin-vs/1.21/kelvin/lang/en_us.json
new file mode 100644
index 000000000000..6a513101165e
--- /dev/null
+++ b/projects/assets/kelvin-vs/1.21/kelvin/lang/en_us.json
@@ -0,0 +1,7 @@
+{
+ "kelvin.requirements.inhibited_by": "Inhibited by: %s (%s%%)",
+ "kelvin.requirements.max_pressure": "Maximum Pressure: %s Pa",
+ "kelvin.requirements.min_pressure": "Minimum Pressure: %s Pa",
+ "kelvin.requirements.max_temperature": "Maximum Temperature: %s K",
+ "kelvin.requirements.min_temperature": "Minimum Temperature: %s K"
+}
\ No newline at end of file
diff --git a/projects/assets/kelvin-vs/1.21/kelvin/lang/zh_cn.json b/projects/assets/kelvin-vs/1.21/kelvin/lang/zh_cn.json
new file mode 100644
index 000000000000..6f65545f5cf5
--- /dev/null
+++ b/projects/assets/kelvin-vs/1.21/kelvin/lang/zh_cn.json
@@ -0,0 +1,7 @@
+{
+ "kelvin.requirements.inhibited_by": "抑制源:%s(%s%%)",
+ "kelvin.requirements.max_pressure": "最大压强:%s Pa",
+ "kelvin.requirements.min_pressure": "最小压强:%s Pa",
+ "kelvin.requirements.max_temperature": "最大温度:%s K",
+ "kelvin.requirements.min_temperature": "最小温度:%s K"
+}
\ No newline at end of file
diff --git a/projects/assets/zps/1.21/zps/doc/en_us/genesis.md b/projects/assets/zps/1.21/zps/doc/en_us/genesis.md
new file mode 100644
index 000000000000..1b9218a4c4ee
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/en_us/genesis.md
@@ -0,0 +1,69 @@
+# Genesis Integration
+
+When [Genesis](https://modrinth.com/mod/genesis) is loaded, commands for querying celestial bodies become available.
+
+---
+
+## Getter
+
+| Getter | Output | Description |
+|-------------|------------|---------------------------------------------------------------|
+| `celestial` | Celestials | This is the starting point for all Genesis celestial queries. |
+
+---
+
+## Celestials Mappers
+
+Produced by: `celestial`
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `current` | Celestial | Returns the celestial body associated with the current dimension, or null if the current dimension is not a celestial surface. |
+| `nearest` | Celestial | Returns the nearest celestial body to the target block's position. Useful in the space dimension, where `current` returns null. |
+| `of ` | Celestial | Returns a specific celestial body by its resource location. |
+
+Examples:
+
+```
+if celestial current == genesis:moon set_redstone 15
+```
+
+```
+if celestial nearest size > 0 set_redstone 15
+```
+
+```
+if celestial of genesis:moon gravity < 0.5 set_redstone 15
+```
+
+---
+
+## Celestial Mappers
+
+Produced by: `celestial current`, `celestial nearest`, `celestial of `
+
+| Mapper | Output | Description |
+|--------|--------|-------------|
+| `gravity` | Double | Surface gravity of the celestial body, as a multiplier on vanilla gravity (the overworld is 1) |
+| `size` | Double | Diameter of the celestial body in blocks |
+| `is_visitable` | Boolean | True if the body has a dimension of its own to arrive in |
+| `pos` | Vec Pos | The celestial body's current position in the space dimension |
+| `as_string` | String | The resource location of the celestial body |
+| `== ` | Boolean | True if equal to the given celestial |
+
+Examples:
+
+```
+if celestial current gravity < 0.5 set_redstone 15
+if celestial current is_visitable set_redstone 15
+```
+
+---
+
+## Null Safety
+
+If `current` or `nearest` returns null (e.g. no celestial is associated with the current dimension), all subsequent celestial mappers return safe defaults:
+- Numeric mappers return `0` or `0.0`
+- Boolean mappers return `false`
+- String mappers return an empty string
+- `pos` returns `Vec3.ZERO`
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/genesis.md b/projects/assets/zps/1.21/zps/doc/zh_cn/genesis.md
new file mode 100644
index 000000000000..71f667b8272c
--- /dev/null
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/genesis.md
@@ -0,0 +1,69 @@
+# Genesis兼容
+
+安装有[Genesis](https://modrinth.com/mod/genesis)时,可以使用请求天体的命令。
+
+---
+
+## 获取器
+
+| 获取器 | 输出 | 描述 |
+| ----------- | ---------- | ----------------------------- |
+| `celestial` | Celestials | 所有Genesis天体请求的起手式。 |
+
+---
+
+## Celestial的映射器
+
+获取自:`celestial`
+
+| 映射器 | 输出 | 描述 |
+| ------------- | --------- | ------------------------------------------------------------------------- |
+| `current` | Celestial | 返回与当前维度相关的天体,若当前维度不是天体表面则返回null。 |
+| `nearest` | Celestial | 返回距目标方块位置最近的天体。在太空维度(`current`会返回null)中很有用。 |
+| `of <天体ID>` | Celestial | 根据资源位置返回天体。 |
+
+例如:
+
+```
+if celestial current == genesis:moon set_redstone 15
+```
+
+```
+if celestial nearest size > 0 set_redstone 15
+```
+
+```
+if celestial of genesis:moon gravity < 0.5 set_redstone 15
+```
+
+---
+
+## Celestial映射器
+
+获取自:`celestial current`、`celestial nearest`、`celestial of <天体ID>`
+
+| 映射器 | 输出 | 描述 |
+| -------------- | ------- | ------------------------------------------------- |
+| `gravity` | Double | 天体的表面重力,格式为原版重力的乘数(主世界为1) |
+| `size` | Double | 天体的直径,以格计 |
+| `is_visitable` | Boolean | 若天体有可造访的维度,返回true |
+| `pos` | Vec Pos | 太空维度中天体当前的位置 |
+| `as_string` | String | 天体的资源位置 |
+| `== <天体ID>` | Boolean | 若与所给天体相等,返回true |
+
+例如:
+
+```
+if celestial current gravity < 0.5 set_redstone 15
+if celestial current is_visitable set_redstone 15
+```
+
+---
+
+## 空值安全
+
+若`current`或`nearest`返回了null(例如,没有与当前维度相关的天体),后续的所有Celestial映射器都会返回安全的默认值:
+- 返回数的映射器会返回`0`或`0.0`
+- 返回布尔值的映射器会返回`false`
+- 返回字符串的映射器会返回空字符串
+- `pos`会返回`Vec3.ZERO`
diff --git a/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md b/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
index 4968e47805db..4f59a0ba7cf3 100644
--- a/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
+++ b/projects/assets/zps/1.21/zps/doc/zh_cn/mappers.md
@@ -20,7 +20,7 @@
| `offset_y ` | BlockPos | 在Y轴上偏移所给数后,返回所得位置 |
| `offset_z ` | BlockPos | 在Z轴上偏移所给数后,返回所得位置 |
| `offset <坐标>` | BlockPos | 根据所给坐标各分量偏移后,返回所得位置 |
-| `== <坐标>` | Boolean | 若等于所给位置,则返回True |
+| `== <坐标>` | Boolean | 若等于所给位置,则返回true |
| `as_string` | String | 格式化为`"x y z"` |
例如:
@@ -38,7 +38,7 @@ set_redstone value_of(pos y & 15)
| 映射器 | 输出 | 描述 |
| --------------- | ------- | ---------------------------------------------- |
-| `== <方块谓词>` | Boolean | 若方块状态匹配谓词(支持方块属性),则返回True |
+| `== <方块谓词>` | Boolean | 若方块状态匹配谓词(支持方块属性),则返回true |
| `id` | String | 形如`"minecraft:stone"`的方块ID,不带其属性 |
例如:
@@ -57,7 +57,7 @@ if block id == value_of(page_contents) set_redstone 15
| 映射器 | 输出 | 描述 |
| --------------- | ------- | ---------------------------------------------------------- |
-| `== <物品谓词>` | Boolean | 若物品匹配谓词,则返回True |
+| `== <物品谓词>` | Boolean | 若物品匹配谓词,则返回true |
| `count` | Int | 堆叠数量;空手返回`0` |
| `id` | String | 形如`"minecraft:stone"`的物品ID,空手返回`"minecraft:air"` |
@@ -231,7 +231,7 @@ if page_contents as_boolean set_redstone 15
| 映射器 | 输出 | 描述 |
| ---------------- | ------- | -------------------------------------------- |
-| `== ` | Boolean | 若与所给维度相等,则返回True |
+| `== ` | Boolean | 若与所给维度相等,则返回true |
| `index` | Int | 稳定的维度整数索引(各服务端会话中恒定不变) |
| `as_string` | String | 维度的资源位置(如`minecraft:overworld`) |
diff --git a/projects/assets/zps/1.21/zps/lang/en_us.json b/projects/assets/zps/1.21/zps/lang/en_us.json
index ef3c8e732291..2fdb7c4ca604 100644
--- a/projects/assets/zps/1.21/zps/lang/en_us.json
+++ b/projects/assets/zps/1.21/zps/lang/en_us.json
@@ -32,6 +32,14 @@
"gui.zps.vaporizer.gas_line": "%s: %s",
"gui.zps.vaporizer.gas_temperature": "Temperature: %s",
"gui.zps.vaporizer.gas_pressure": "Pressure: %s",
+ "block.zps.cryo_condenser": "Cryo Condenser",
+ "block.zps.cryo_condenser.zps_tooltip": "Consumes FE to cool down, then freezes gas into items.\n\nEach recipe needs a maximum temperature and warms the machine when it runs, more so the hotter the gas. Gas flows freely in and out through the top.",
+ "gui.zps.cryo_condenser.status.idle": "Idle: not enough gas to freeze",
+ "gui.zps.cryo_condenser.status.cooling": "Cooling to %s",
+ "gui.zps.cryo_condenser.status.no_power": "No power: needs %s",
+ "gui.zps.cryo_condenser.status.condensing": "Condensing",
+ "gui.zps.cryo_condenser.status.output_full": "Output full",
+ "jei.zps.condensing.temperature_cost": "Temperature Cost: %s K",
"jei.zps.vaporizing.temperature_cost": "Temperature Cost: %s K",
"jei.zps.rolling.time": "%ss",
"jei.zps.thruster.burn_rate": "Burn Rate: %s/s",
@@ -47,6 +55,14 @@
"gui.zps.gas_gauge.mode.pressure": "Pressure",
"gui.zps.gas_gauge.mode.temperature": "Temperature",
"block.zps.gas_duct": "Gas Duct",
+ "block.zps.gas_filter": "Gas Filter",
+ "block.zps.gas_filter.zps_tooltip": "A [Gas Duct] that stops selected gases from passing through.\n\n[R-Click] to choose which gases are blocked.",
+ "block.zps.extinguished_torch": "Extinguished Torch",
+ "block.zps.extinguished_wall_torch": "Extinguished Torch",
+ "block.zps.extinguished_soul_torch": "Extinguished Soul Torch",
+ "block.zps.extinguished_soul_wall_torch": "Extinguished Soul Torch",
+ "block.zps.extinguished_lantern": "Extinguished Lantern",
+ "block.zps.extinguished_soul_lantern": "Extinguished Soul Lantern",
"block.zps.creative_gas_generator": "Creative Gas Generator",
"block.zps.creative_gas_generator.zps_tooltip": "An infinite source of [Gas], only obtainable in Creative Mode.",
"block.zps.reinforced_plating": "Reinforced Plating",
@@ -66,6 +82,7 @@
"gui.zps.reactor_port.filter.narration.passing": "%s, passing",
"gui.zps.reactor_port.no_gases": "No gases registered",
"gui.zps.reactor_port.no_port": "No port here",
+ "gui.zps.gas_filter.no_filter": "No filter here",
"advancement.zps.reactor_ignited.title": "Star in a Box",
"advancement.zps.reactor_ignited.description": "Heat a fusion reactor to ignition temperature.",
"advancement.zps.reactor_meltdown.title": "Containment Failure",
@@ -394,6 +411,7 @@
"zps.manual.collisions": "Collisions",
"zps.manual.reactors": "Reactors",
"zps.manual.create": "Create",
+ "zps.manual.genesis": "Genesis",
"zps.manual.sable": "Sable",
"zps.manual.valkyrien_skies": "Valkyrien Skies",
"zps.screen.open_manual": "Open Script Commands Manual",
@@ -430,7 +448,7 @@
"zps.ponder.octo_controller.header": "Octo-Controller",
"zps.ponder.octo_controller.text_1": "Interact with an Octo-Controller to control it.",
- "zps.ponder.octo_controller.text_2": "By default, WASD and Space, Q, Left Shift and E control the 8 redstone outputs.",
+ "zps.ponder.octo_controller.text_2": "By default, WASD and the arrow keys control the 8 redstone outputs.",
"zps.ponder.octo_controller.text_3": "Interact with the controller again to step off.",
"zps.ponder.octo_controller.text_4": "Sneak and interact with an empty hand to choose the key for each output.",
@@ -589,7 +607,6 @@
"zps.controller.side.right": "Right",
"zps.controller.side.back": "Back",
"zps.controller.side.down": "Down",
- "zps.controller.mount_hint": "Press %s on the Controller again to Dismount",
"zps.duct.mount_hint": "Press %s to Exit, %s/%s to Crawl Through",
"zps.duct.hud.title": "Vent %s / %s",
"zps.duct.hud.entry": "%s, %s, %s \u00b7 where you got in",
diff --git a/projects/assets/zps/1.21/zps/lang/zh_cn.json b/projects/assets/zps/1.21/zps/lang/zh_cn.json
index 4d04ba95b800..4d165adf6395 100644
--- a/projects/assets/zps/1.21/zps/lang/zh_cn.json
+++ b/projects/assets/zps/1.21/zps/lang/zh_cn.json
@@ -32,6 +32,14 @@
"gui.zps.vaporizer.gas_line": "%s:%s",
"gui.zps.vaporizer.gas_temperature": "温度:%s",
"gui.zps.vaporizer.gas_pressure": "压强:%s",
+ "block.zps.cryo_condenser": "低温冷凝机",
+ "block.zps.cryo_condenser.zps_tooltip": "消耗FE以冷却,随后将气体冻结为物品。\n\n每个配方都有所需的最大温度,且会在运行配方时加热机器,气体越热加热越快。气体可从顶部不受限地输入输出。",
+ "gui.zps.cryo_condenser.status.idle": "空闲:没有足够冷却的气体",
+ "gui.zps.cryo_condenser.status.cooling": "正在冷却至%s",
+ "gui.zps.cryo_condenser.status.no_power": "无供能:需要%s",
+ "gui.zps.cryo_condenser.status.condensing": "正在冷凝",
+ "gui.zps.cryo_condenser.status.output_full": "输出已满",
+ "jei.zps.condensing.temperature_cost": "温度消耗:%s K",
"jei.zps.vaporizing.temperature_cost": "温度消耗:%s K",
"jei.zps.rolling.time": "%ss",
"jei.zps.thruster.burn_rate": "燃烧速率:%s/s",
@@ -47,6 +55,14 @@
"gui.zps.gas_gauge.mode.pressure": "压强",
"gui.zps.gas_gauge.mode.temperature": "温度",
"block.zps.gas_duct": "气体管道",
+ "block.zps.gas_filter": "气体筛选器",
+ "block.zps.gas_filter.zps_tooltip": "会阻止所选气体通过的[气体管道]。\n\n[右击]以选择阻挡何种气体。",
+ "block.zps.extinguished_torch": "熄灭的火把",
+ "block.zps.extinguished_wall_torch": "熄灭的火把",
+ "block.zps.extinguished_soul_torch": "熄灭的灵魂火把",
+ "block.zps.extinguished_soul_wall_torch": "熄灭的灵魂火把",
+ "block.zps.extinguished_lantern": "熄灭的灯笼",
+ "block.zps.extinguished_soul_lantern": "熄灭的灵魂灯笼",
"block.zps.creative_gas_generator": "创造气体生成器",
"block.zps.creative_gas_generator.zps_tooltip": "无限[气体]源,只能在创造模式中获得。",
"block.zps.reinforced_plating": "强化镶板",
@@ -66,6 +82,7 @@
"gui.zps.reactor_port.filter.narration.passing": "%s,允许传输",
"gui.zps.reactor_port.no_gases": "未注册气体",
"gui.zps.reactor_port.no_port": "该处没有端口",
+ "gui.zps.gas_filter.no_filter": "该处没有筛选器",
"advancement.zps.reactor_ignited.title": "盒中恒星",
"advancement.zps.reactor_ignited.description": "将聚变反应堆加热至点火温度。",
"advancement.zps.reactor_meltdown.title": "安全壳失效",
@@ -394,6 +411,7 @@
"zps.manual.collisions": "碰撞",
"zps.manual.reactors": "反应堆",
"zps.manual.create": "机械动力",
+ "zps.manual.genesis": "Genesis",
"zps.manual.sable": "Sable",
"zps.manual.valkyrien_skies": "Valkyrien Skies",
"zps.screen.open_manual": "打开脚本命令手册",
@@ -430,7 +448,7 @@
"zps.ponder.octo_controller.header": "八缆控制器",
"zps.ponder.octo_controller.text_1": "与八缆控制器交互以进入控制模式。",
- "zps.ponder.octo_controller.text_2": "默认情况下,可使用WASD、空格、Q、左Shift、E来控制8个红石输出。",
+ "zps.ponder.octo_controller.text_2": "默认情况下,可使用WASD和方向键来控制8个红石输出。",
"zps.ponder.octo_controller.text_3": "再次与控制器交互可离座。",
"zps.ponder.octo_controller.text_4": "潜行空手交互来选择各输出分别由哪些键控制。",
@@ -589,7 +607,6 @@
"zps.controller.side.right": "右",
"zps.controller.side.back": "后",
"zps.controller.side.down": "下",
- "zps.controller.mount_hint": "在控制器中再次按下%s来脱离",
"zps.duct.mount_hint": "按下%s来退出,按下%s/%s来钻入",
"zps.duct.hud.title": "排气口 %s / %s",
"zps.duct.hud.entry": "%s, %s, %s \u00b7 进入位置",